• Practice
  • About 12 min
  • 5 practice questions

Cuts and notches: the shape that appears when the sheet is opened

Reflect every corner of a cut to find its shape on opening, see when a cut joins into one larger shape, and use the area rule: area opened = area cut times layers.

If something looks wrong, please tell us.

A hole is a single point in our coordinates, but a real question may cut a small triangle or a rectangle out of the folded paper. When the paper is opened the cut appears again, reflected. The new thing to learn is what happens when the cut touches a crease: the pieces join into one bigger shape.

Method

  1. Write down the corners of the cut in the folded packet.
  2. Undo the last fold: reflect every corner in that crease.
  3. Undo the earlier folds in the same way, always reflecting everything found so far.
  4. If a cut touches a crease, its reflection touches it too, and the two join into one shape. If it does not touch a crease, the copies stay apart.

The area rule

Each layer carries a copy of the cut, so the total area removed on opening is the area of the cut times the number of layers it passes through. Joining does not change the area, only the shape.

Worked examples

Example 1. The left half is folded over the crease x = 4. A triangle with corners (4, 2), (6, 2) and (4, 4) is cut out. It touches the crease along its left side. Reflecting the corners gives (4, 2), (2, 2) and (4, 4). The two triangles share the side from (4, 2) to (4, 4), so they join into one triangle with corners (2, 2), (6, 2) and (4, 4). Its base is 4 and its height is 2, so its area is half of 4 times 2 = 4. Check: the cut had area half of 2 times 2 = 2, and 2 layers give 2 times 2 = 4.

Example 2. After the same fold, a rectangle from x = 4 to 5 and y = 3 to 5 is cut, with its left edge on the crease. Its reflection runs from x = 3 to 4. Together they form one rectangle from x = 3 to 5 and y = 3 to 5, a 2 by 2 square of area 4. The cut had area 1 times 2 = 2, and 2 times 2 = 4.

Example 3. After the same fold, a rectangle from x = 5 to 7 and y = 1 to 2 is cut, away from the crease. Its reflection runs from x = 1 to 3. The copies do not touch, so there are two separate rectangles, each of area 2, total area 4 = 2 layers times 2.

Example 4. The sheet is folded along x = 4 and then y = 4, so the packet is the square x from 4 to 8, y from 4 to 8, with four layers. A square from (4, 4) to (5, 5) is cut from the corner of the packet, touching both creases. Undo y = 4: the square from (4, 3) to (5, 4) appears, and the two join into x from 4 to 5, y from 3 to 5. Undo x = 4: they reflect to x from 3 to 4 and join again. The opened cut is one 2 by 2 square from (3, 3) to (5, 5), area 4. The cut area was 1, and 4 layers give 4.

What happens to a cut
Position of the cutResult on opening
Touches one creaseJoins its reflection into one shape, twice as large
Touches no creaseSeparate copies, one per layer
Touches the crossing of two creasesOne shape, four times as large, centred on the crossing

Reflect every corner. A cut that touches the crease joins its mirror image into one shape. Area opened = area cut times layers.

Key takeaways

  • Reflect all corners of the cut, last fold first.
  • A cut on a crease makes one larger shape; a cut away from it makes separate copies.
  • Area on opening = area of the cut times the number of layers.
  • Check by area: the answer should have exactly that area.

Check your understanding

  1. 1. The left half is folded over x = 4 and a triangle with corners (4, 1), (6, 1) and (4, 3) is cut. What is the area of the shape on opening?

    1. 4
    2. 2
    3. 6
    4. 8
    Show answer

    Answer: A. The cut has area half of 2 times 2 = 2. It touches the crease, so it joins its mirror image into one triangle with base 4 and height 2. Area = half of 4 times 2 = 4, which is 2 layers times 2.

  2. 2. After folding along x = 4, a rectangle from x = 5 to 6 and y = 2 to 5 is cut. What is the total area removed on opening, and how many separate holes are there?

    1. Area 3, in 1 hole
    2. Area 6, in 1 hole
    3. Area 6, in 2 separate holes
    4. Area 3, in 2 holes
    Show answer

    Answer: C. The cut has area 1 times 3 = 3 and does not touch the crease, so each of the 2 layers gives a copy. The copies stay apart. Total area 6 in 2 holes.

  3. 3. After folding along x = 4, a rectangle from x = 4 to 6 and y = 1 to 2 is cut. How wide is the opened shape?

    1. 2 units
    2. 4 units
    3. 3 units
    4. 8 units
    Show answer

    Answer: B. The rectangle touches the crease, so its reflection from x = 2 to 4 joins it. The opened rectangle runs from x = 2 to 6, so it is 4 wide and 1 tall.

  4. 4. The sheet is folded along x = 4 and y = 4, and a square from (4, 4) to (6, 6) is cut from the corner of the packet. What is the side of the opened square?

    1. 4 units
    2. 2 units
    3. 6 units
    4. 8 units
    Show answer

    Answer: A. The cut touches both creases, so it joins its reflections in all four quarters. The opened shape runs from 2 to 6 in each direction, a 4 by 4 square of area 16 = 4 layers times 4.

  5. 5. After folding along x = 4 and y = 4, a square from (5, 5) to (6, 6) is cut, touching no crease. How many separate squares appear on opening?

    1. 1
    2. 2
    3. 8
    4. 4
    Show answer

    Answer: D. The square touches neither crease, so each of the 4 layers shows its own copy. The four squares are at the four corners of a larger square and do not touch each other.

Privacy · Terms · Refunds · Delivery