• Practice
  • About 12 min
  • 5 practice questions

Folds away from the middle: creases at x = 2, x = 6 and similar

Fold a strip over a crease that is not in the middle of the sheet, and use the rule new x = 2c minus x to find the second hole made by a punch.

If something looks wrong, please tell us.

So far our creases ran through the middle of the sheet. Real questions often fold only a strip, say the left quarter, over a crease nearer the edge. The idea is unchanged: unfolding is reflection in the crease. Only the number in the formula changes, and that is where marks are lost.

The general reflection rule

On the 8 by 8 sheet, with the bottom-left corner at (0, 0), a vertical crease is the line x = c. A point (x, y) is reflected to (2c minus x, y). The y-coordinate does not change, because the hole slides straight across the crease. In the same way a horizontal crease y = c sends (x, y) to (x, 2c minus y).

Reflection for several creases
CreaseReflected pointWhere the folded strip lies
x = 2(4 minus x, y)The strip from x = 0 to 2 lands on x = 2 to 4
x = 4(8 minus x, y)The left half lands on the right half
x = 6(12 minus x, y)The strip from x = 6 to 8 lands on x = 4 to 6
y = 2(x, 4 minus y)The strip from y = 0 to 2 lands on y = 2 to 4
y = 6(x, 12 minus y)The strip from y = 6 to 8 lands on y = 4 to 6

Notice that the number in the formula is always twice the crease position. A quick sanity check: a point on the crease must stay where it is. Put x = 2 into 4 minus x and you get 2, so the rule behaves.

Layers decide the number of holes

A partial fold makes some parts of the sheet two layers thick and leaves the rest one layer thick. A punch makes one hole per layer it goes through. So first decide whether the punch lies on the folded strip (two holes) or on the part that was not folded (one hole).

Worked examples

Example 1. The strip with x from 0 to 2 is folded over the crease x = 2, so it lies on x = 2 to 4. A hole is punched at (3, 5), where there are two layers. The partner hole is at (4 minus 3, 5) = (1, 5). Holes on opening: (3, 5) and (1, 5).

Example 2. The strip with x from 6 to 8 is folded over the crease x = 6, so it lies on x = 4 to 6. A hole is punched at (5, 2). Its partner is (12 minus 5, 2) = (7, 2). Holes: (5, 2) and (7, 2). Both lie inside the sheet, as they must.

Example 3. The strip with y from 0 to 2 is folded up over the crease y = 2. A hole is punched at (6, 3). The partner is (6, 4 minus 3) = (6, 1).

Example 4. The left strip is folded over x = 2 as in Example 1, and a hole is punched at (6, 3). The point (6, 3) is on the part that was not folded, so there is only one layer there. Only one hole is made, at (6, 3).

Example 5. Both end strips are folded in: the left one over x = 2 and the right one over x = 6. The middle part, x from 2 to 6, has two layers everywhere. A punch at (3, 6) gives (3, 6) and (1, 6). A punch at (5, 6) gives (5, 6) and (7, 6). Two punches, four holes.

Reflect in the crease x = c with new x = 2c minus x, and in y = c with new y = 2c minus y. Count the layers at the punch first.

Key takeaways

  • The number in the formula is twice the crease position, not always 8.
  • A point on the crease does not move; use this to check your formula.
  • Count layers at the punch: a punch on an unfolded part makes only one hole.
  • Every partner hole must lie inside the sheet, from 0 to 8.

Check your understanding

  1. 1. The left strip (x from 0 to 2) is folded over the crease x = 2 and a hole is punched at (3, 6). Where is the second hole?

    1. (1, 6)
    2. (5, 6)
    3. (3, 2)
    4. (4, 6)
    Show answer

    Answer: A. Reflect in x = 2: new x = 4 minus 3 = 1, and y stays 6. The second hole is (1, 6).

  2. 2. The right strip (x from 6 to 8) is folded over the crease x = 6 and a hole is punched at (4, 1). Where is the second hole?

    1. (2, 1)
    2. (6, 1)
    3. (8, 1)
    4. (4, 7)
    Show answer

    Answer: C. Reflect in x = 6: new x = 12 minus 4 = 8, and y stays 1. The second hole is (8, 1), on the edge of the sheet.

  3. 3. The top strip (y from 6 to 8) is folded down over the crease y = 6 and a hole is punched at (2, 5). Where is the second hole?

    1. (2, 3)
    2. (6, 5)
    3. (2, 6)
    4. (2, 7)
    Show answer

    Answer: D. Reflect in y = 6: new y = 12 minus 5 = 7, and x stays 2. The second hole is (2, 7), on the part that was folded.

  4. 4. Which rule sends a point (x, y) to (12 minus x, y) when the sheet is unfolded?

    1. Reflection in the crease x = 4
    2. Reflection in the crease x = 6
    3. Reflection in the crease y = 6
    4. Reflection in the crease x = 12
    Show answer

    Answer: B. The number in the rule is twice the crease position. 12 = 2 times 6, so the crease is x = 6. The y-coordinate is unchanged, so the crease is vertical.

  5. 5. The left strip is folded over x = 2 and a hole is punched at (7, 4), on the part of the sheet that was not folded. How many holes appear on opening?

    1. 2
    2. 1
    3. 3
    4. 4
    Show answer

    Answer: B. The point (7, 4) lies on a single layer of paper, because only the strip from x = 0 to 2 was folded, and it lies on x = 2 to 4. One layer gives one hole.

Privacy · Terms · Refunds · Delivery