- Practice
- About 13 min
- 5 practice questions
Three folds and eight layers: a step-by-step table
Track a punch through three folds by keeping a table of holes, undoing the last fold first and doubling the set each time unless a hole is on the crease.
If something looks wrong, please tell us.
Three folds in half give eight layers and, usually, eight holes. The danger is not the idea but bookkeeping: with so many points it is easy to lose one. The remedy is a small table, one row for each unfolding step, listing every hole found so far.
The set-up
Fold 1: the left half goes over the right half along x = 4. Fold 2: the bottom half goes up along y = 4. The packet is now the square x from 4 to 8, y from 4 to 8. Fold 3 is a new one: the left half of the packet (x from 4 to 6) goes over the right half along x = 6, so the packet is the strip x from 6 to 8, y from 4 to 8, eight layers thick.
To unfold, go backwards: reflect all holes in x = 6, then in y = 4, then in x = 4. Use new x = 12 minus x for the first, new y = 8 minus y for the second, and new x = 8 minus x for the third.
Worked example 1
A hole is punched at (7, 5) in the packet.
| Step | Reflection used | Holes now |
|---|---|---|
| Punch | - | (7, 5) |
| Undo fold 3 | x to 12 minus x | (7, 5), (5, 5) |
| Undo fold 2 | y to 8 minus y | (7, 5), (5, 5), (7, 3), (5, 3) |
| Undo fold 1 | x to 8 minus x | (7, 5), (5, 5), (7, 3), (5, 3), (1, 5), (3, 5), (1, 3), (3, 3) |
There are 8 holes, as expected for 8 layers. The pattern is neat: x takes the values 1, 3, 5, 7 and y takes the values 3 and 5, with one hole for each combination.
Worked example 2: a hole on the third crease
A hole is punched at (6, 6), on the crease x = 6. Undo fold 3: the reflection of (6, 6) is itself, so there is still one hole. Undo fold 2: (6, 6) and (6, 2). Undo fold 1: (6, 6), (6, 2), (2, 6) and (2, 2). The answer is 4 holes, not 8, because the hole on a crease did not double at that step.
Worked example 3: a different third fold
Keep folds 1 and 2, but now fold 3 takes the bottom strip of the packet (y from 4 to 6) up over the top strip along y = 6. The packet is the square-ish strip x from 4 to 8, y from 6 to 8. A hole is punched at (5, 7). Undo fold 3 with new y = 12 minus y: (5, 7) and (5, 5). Undo fold 2 with new y = 8 minus y: (5, 7), (5, 5), (5, 1) and (5, 3). Undo fold 1 with new x = 8 minus x: add (3, 7), (3, 5), (3, 1) and (3, 3). Total 8 holes: x is 3 or 5, and y is 1, 3, 5 or 7.
Undo the last fold first. At each step reflect every hole found so far. Layers = holes, minus one doubling for each crease a hole sits on.
Key takeaways
- Keep a table with one row per unfolding step.
- The reflection formula changes with each crease: 12 minus x for x = 6, 8 minus y for y = 4.
- A hole on a crease does not double at that step.
- Finish by comparing the number of holes with the number of layers.
Check your understanding
-
1. The sheet is folded in half three times and one punch is made away from every crease. How many holes appear on opening?
- 8
- 3
- 6
- 9
Show answer
Answer: A. Each fold in half doubles the layers: 2 times 2 times 2 = 8 layers. A punch away from every crease makes one hole per layer, so 8 holes.
-
2. Using the folds of Worked example 1 (x = 4, then y = 4, then x = 6), a hole is punched at (7, 7). Which of these is one of the holes on opening?
- (3, 5)
- (6, 7)
- (3, 7)
- (2, 7)
Show answer
Answer: C. Undo x = 6: (7, 7) and (5, 7). Undo y = 4: add (7, 1) and (5, 1). Undo x = 4: add (1, 7), (3, 7), (1, 1) and (3, 1). So (3, 7) is a hole, and the others are not.
-
3. With the same folds, a hole is punched at (6, 5), on the crease x = 6. How many holes appear on opening?
- 2
- 8
- 6
- 4
Show answer
Answer: D. Undo x = 6: the hole is on the crease, so it stays single. Undo y = 4: (6, 5) and (6, 3). Undo x = 4: add (2, 5) and (2, 3). Four holes in all.
-
4. In Worked example 3 (third fold along y = 6), a hole is punched at (6, 7). After undoing only the third fold, the holes are at
- (6, 7) and (6, 1)
- (6, 7) and (6, 5)
- (6, 7) and (2, 7)
- (6, 7) and (6, 6)
Show answer
Answer: B. Undo fold 3 by reflecting in y = 6: new y = 12 minus 7 = 5. So the holes are (6, 7) and (6, 5). The other two folds are still to be undone.
-
5. After folds along x = 4 and y = 4, fold 3 along y = 6 brings the strip from y = 4 to 6 up over the strip from y = 6 to 8. What region does the packet occupy?
- x from 4 to 8, y from 6 to 8
- x from 4 to 8, y from 4 to 6
- x from 6 to 8, y from 4 to 8
- x from 4 to 6, y from 6 to 8
Show answer
Answer: A. The strip that moves goes on top of the strip from y = 6 to 8, so the packet occupies that top strip: x from 4 to 8 and y from 6 to 8. The x-range is unchanged because fold 3 is horizontal.
Sign in to keep track of the lessons you finish.