- Practice
- About 11 min
- 5 practice questions
Symmetry checks: testing answer options quickly
Use the midpoint test, the layer count and symmetry in every crease to rule out wrong answer options without unfolding completely.
If something looks wrong, please tell us.
In the exam you are shown several opened sheets and asked to pick the right one. You can often reject three of the four in seconds by asking what must be true of any opened sheet, without doing the full unfolding. Three tests are enough.
Test 1: symmetry in every crease
A sheet opened after folds is symmetrical in each crease used. If the folds were along x = 4, every hole must have a partner reflected in x = 4, and if the folds were also along y = 4, there must be partners in y = 4 as well. An option with a hole that has no partner is wrong.
Test 2: the midpoint test
Two holes are mirror images in a crease only if the crease passes through the midpoint of the line joining them, and the join is at right angles to the crease. For the vertical crease x = 4, the two holes must have the same y-coordinate, and their x-coordinates must add up to 8. Holes (6, 3) and (2, 3) pass: same y, and 6 plus 2 is 8. Holes (6, 3) and (2, 4) fail, because the y-coordinates differ. Holes (5, 1) and (2, 1) fail, because 5 plus 2 is 7, not 8.
Test 3: the count
The number of holes from one punch equals the number of layers, unless holes sit on a crease. Two folds in half and one punch away from the creases must give 4 holes, not 3 and not 6.
Worked examples
Example 1. Folds along x = 4 then y = 4; a punch is made at (7, 6) in the packet. Which option is correct? (A) (7, 6), (1, 6), (7, 2), (1, 2). (B) (7, 6), (1, 6), (7, 2). (C) (7, 6), (1, 6), (7, 3), (1, 3). (D) (7, 6), (2, 6), (7, 2), (2, 2). Option B has 3 holes, but there are 4 layers: reject. Option C has the partner of (7, 6) in y = 4 at (7, 3), but 6 plus 3 is not 8: reject. Option D pairs (7, 6) with (2, 6), but 7 plus 2 is 9, not 8: reject. Option A passes all tests and is the answer; unfolding confirms it: (7, 6) goes to (7, 2), then both reflect in x = 4 to (1, 6) and (1, 2).
Example 2. A single fold along the diagonal y = x and a punch at (6, 2). The mirror image in y = x swaps the coordinates, so the partner is (2, 6). The midpoint of (6, 2) and (2, 6) is (4, 4), which lies on y = x, and the join slopes the other way, at right angles to the crease. An option showing (6, 2) with (2, 4) would fail both tests.
Example 3. A student's opened sheet shows holes at (1, 5), (7, 5) and (3, 2) after a fold along x = 4. The partners of (1, 5) and (7, 5) are each other: 1 plus 7 is 8, same y. But (3, 2) has no partner. The missing hole is at (8 minus 3, 2) = (5, 2).
Every hole needs a partner: same distance from the crease, joined at right angles, midpoint on the crease. Then check the count against the layers.
Key takeaways
- Reject options in which a hole has no mirror partner.
- For x = 4, partners share y and their x-values add to 8.
- The hole count must match the number of layers (less one doubling for each hole on a crease).
- Tests only reject; if one option survives all three, confirm by unfolding.
Check your understanding
-
1. Folds along x = 4 and y = 4 and a punch at (7, 6) in the packet. Which set shows the opened holes?
- (7, 6), (1, 6), (7, 2), (1, 2)
- (7, 6), (1, 6), (7, 2)
- (7, 6), (2, 6), (7, 2), (2, 2)
- (7, 6), (1, 6), (7, 3), (1, 3)
Show answer
Answer: A. Reflect (7, 6) in y = 4 to get (7, 2), then reflect both in x = 4 to get (1, 6) and (1, 2). The other sets have too few holes or pairs that do not sum to 8.
-
2. Which pair of holes could be mirror images in the crease x = 4?
- (6, 3) and (2, 4)
- (6, 3) and (2, 3)
- (5, 1) and (2, 1)
- (7, 7) and (2, 7)
Show answer
Answer: B. Mirror images in x = 4 share the same y, and their x-values add to 8. Only (6, 3) and (2, 3) pass: same y, and 6 plus 2 is 8.
-
3. A sheet is folded in half twice and one punch is made away from the creases. An answer shows 6 holes. What is wrong?
- There are 6 layers, so there should be 12 holes
- There are 2 layers, so there should be 2 holes
- There are 4 layers, so there should be 4 holes
- Nothing, because the count is always even
Show answer
Answer: C. Two folds in half give 2 times 2 = 4 layers, and a punch away from the creases makes one hole per layer. So 4 holes, not 6.
-
4. A single fold along the diagonal y = x and a punch at (6, 2). Which set shows the opened holes?
- (6, 2) and (2, 4)
- (6, 2) and (6, 6)
- (6, 2) and (4, 6)
- (6, 2) and (2, 6)
Show answer
Answer: D. Reflection in y = x swaps the coordinates, so the partner of (6, 2) is (2, 6). The midpoint (4, 4) lies on y = x. The other sets fail the midpoint test.
-
5. After a fold along x = 4, the opened sheet shows holes at (1, 5), (7, 5) and (3, 2). Which hole must be added for the sheet to be symmetrical?
- (5, 2)
- (5, 5)
- (3, 6)
- (8, 2)
Show answer
Answer: A. (3, 2) needs a partner with the same y and an x-value that makes the sum 8: 8 minus 3 = 5. So the missing hole is (5, 2).
Sign in to keep track of the lessons you finish.