Revision notes

Paper Folding: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

One fold, one punch: reflecting across the crease

Reflections for the two central creases
CreaseA point (x, y) is reflected to
Vertical crease at x = 4(8 minus x, y)
Horizontal crease at y = 4(x, 8 minus y)

A punch away from the crease makes two holes, mirror images of each other in the crease. A punch centred on the crease makes one.

— Rule to remember
  • Unfolding means reflecting in the crease.
  • Use x = 4 for a vertical crease and y = 4 for a horizontal one on an 8 by 8 sheet.
  • A hole on the crease stays a single hole.
Read the full lesson

Lesson 2

Two folds: working back from the last fold

Undo the last fold first. Each unfolding doubles the holes, unless a hole sits on the crease being undone.

— Rule to remember
  • Reverse the folds when unfolding: last fold first.
  • Reflect every hole found so far, every time.
  • Holes on a crease do not double for that crease.
Read the full lesson

Lesson 3

Diagonal folds and triangles

Diagonal creases on the 8 by 8 sheet
CreaseEquation(x, y) is reflected to
From (0, 0) to (8, 8)y = x(y, x)
From (0, 8) to (8, 0)x plus y = 8(8 minus y, 8 minus x)

Along the diagonal y = x, swap the two coordinates. Holes on a crease stay single.

— Rule to remember
  • Crease y = x: swap the coordinates.
  • Crease x plus y = 8: (x, y) goes to (8 minus y, 8 minus x).
  • Undo the last fold first, as always.
Read the full lesson

Lesson 4

Counting layers and partial folds

Holes from one punch = layers at that spot, reduced for any hole centred on a crease.

— Rule to remember
  • Count the layers at the exact spot of the punch.
  • Each fold in half doubles the layers.
  • Partial folds give different layer counts in different regions.
Read the full lesson

Lesson 5

Mixed paper folding practice and common traps

Last fold first, reflect every hole, count against the layers.

— Rule to remember
  • Follow the five-step routine every time.
  • Undo folds in reverse order and reflect all holes.
  • Check the hole count against the number of layers.
Read the full lesson

Lesson 6

Folds away from the middle: creases at x = 2, x = 6 and similar

Reflection for several creases
CreaseReflected pointWhere the folded strip lies
x = 2(4 minus x, y)The strip from x = 0 to 2 lands on x = 2 to 4
x = 4(8 minus x, y)The left half lands on the right half
x = 6(12 minus x, y)The strip from x = 6 to 8 lands on x = 4 to 6
y = 2(x, 4 minus y)The strip from y = 0 to 2 lands on y = 2 to 4
y = 6(x, 12 minus y)The strip from y = 6 to 8 lands on y = 4 to 6

Reflect in the crease x = c with new x = 2c minus x, and in y = c with new y = 2c minus y. Count the layers at the punch first.

  • The number in the formula is twice the crease position, not always 8.
  • A point on the crease does not move; use this to check your formula.
  • Count layers at the punch: a punch on an unfolded part makes only one hole.
  • Every partner hole must lie inside the sheet, from 0 to 8.
Read the full lesson

Lesson 7

Cuts and notches: the shape that appears when the sheet is opened

What happens to a cut
Position of the cutResult on opening
Touches one creaseJoins its reflection into one shape, twice as large
Touches no creaseSeparate copies, one per layer
Touches the crossing of two creasesOne shape, four times as large, centred on the crossing

Reflect every corner. A cut that touches the crease joins its mirror image into one shape. Area opened = area cut times layers.

  • Reflect all corners of the cut, last fold first.
  • A cut on a crease makes one larger shape; a cut away from it makes separate copies.
  • Area on opening = area of the cut times the number of layers.
  • Check by area: the answer should have exactly that area.
Read the full lesson

Lesson 8

Three folds and eight layers: a step-by-step table

Unfolding step by step
StepReflection usedHoles now
Punch-(7, 5)
Undo fold 3x to 12 minus x(7, 5), (5, 5)
Undo fold 2y to 8 minus y(7, 5), (5, 5), (7, 3), (5, 3)
Undo fold 1x to 8 minus x(7, 5), (5, 5), (7, 3), (5, 3), (1, 5), (3, 5), (1, 3), (3, 3)

Undo the last fold first. At each step reflect every hole found so far. Layers = holes, minus one doubling for each crease a hole sits on.

  • Keep a table with one row per unfolding step.
  • The reflection formula changes with each crease: 12 minus x for x = 6, 8 minus y for y = 4.
  • A hole on a crease does not double at that step.
  • Finish by comparing the number of holes with the number of layers.
Read the full lesson

Lesson 9

Symmetry checks: testing answer options quickly

Every hole needs a partner: same distance from the crease, joined at right angles, midpoint on the crease. Then check the count against the layers.

  • Reject options in which a hole has no mirror partner.
  • For x = 4, partners share y and their x-values add to 8.
  • The hole count must match the number of layers (less one doubling for each hole on a crease).
  • Tests only reject; if one option survives all three, confirm by unfolding.
Read the full lesson

Privacy · Terms · Refunds · Delivery