• Foundation
  • 15 practice questions

Final self-assessment: Electricity

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions on electricity first, then check your answers and read each explanation. The questions follow the lessons in order - questions 1-3: lesson 1 (Electric charge and current), questions 4-6: lesson 2 (Potential difference and Ohm's law), questions 7-9: lesson 3 (Resistors in series and parallel), questions 10-12: lesson 4 (Electric power and energy), questions 13-15: lesson 5 (Heating effect of current and electrical safety). Revisit the lesson for any question you missed.

Final self-assessment

  1. 1. A current of 0.32 A flows in a wire. How many electrons pass a point in the wire each second? (e = 1.6 × 10⁻¹⁹ C)

    1. 2 × 10¹⁸
    2. 5 × 10¹⁸
    3. 2 × 10¹⁹
    4. 5.12 × 10⁻²⁰
    Show answer

    Answer: A. Charge per second = 0.32 C. Number = 0.32 ÷ (1.6 × 10⁻¹⁹) = 2 × 10¹⁸ electrons.

  2. 2. A charge of 1200 C flows through a device in 1 hour. What is the current?

    1. 20 A
    2. 1200 A
    3. 3 A
    4. 1/3 A (about 0.33 A)
    Show answer

    Answer: D. t = 1 hour = 3600 s. I = 1200 ÷ 3600 = 1/3 A ≈ 0.33 A. (20 A comes from dividing by minutes.)

  3. 3. Which list contains only conductors?

    1. Copper, graphite, salt water
    2. Copper, rubber, iron
    3. Plastic, dry wood, graphite
    4. Rubber, plastic, dry wood
    Show answer

    Answer: A. Metals, graphite and salt water conduct electricity; rubber, plastic and dry wood are insulators.

  4. 4. A wire has a resistance of 8 Ω. Another wire of the same material is twice as long and has twice the radius. What is its resistance?

    1. 8 Ω
    2. 16 Ω
    3. 4 Ω
    4. 2 Ω
    Show answer

    Answer: C. Twice the length doubles R; twice the radius makes the area 4 times, dividing R by 4. New R = 8 × 2 ÷ 4 = 4 Ω.

  5. 5. A resistor carries 0.5 A when 4 V is applied across it. At the same temperature, what current flows when 12 V is applied?

    1. 1.5 A
    2. 0.17 A
    3. 6 A
    4. 3 A
    Show answer

    Answer: A. R = V ÷ I = 4 ÷ 0.5 = 8 Ω. At 12 V, I = 12 ÷ 8 = 1.5 A (current is proportional to voltage).

  6. 6. How much work is done in moving 5 C of charge through a potential difference of 9 V?

    1. 1.8 J
    2. 0.56 J
    3. 45 J
    4. 14 J
    Show answer

    Answer: C. W = V × Q = 9 × 5 = 45 J.

  7. 7. A 4 Ω resistor is in series with a parallel pair of 6 Ω and 3 Ω, across a 12 V supply. What current flows through the 3 Ω resistor?

    1. 4 A
    2. 2 A
    3. 0.67 A
    4. 1.33 A
    Show answer

    Answer: D. Parallel pair: 6 × 3 ÷ 9 = 2 Ω. Total = 4 + 2 = 6 Ω, so I = 12 ÷ 6 = 2 A. Voltage across the pair = 2 × 2 = 4 V. Current in 3 Ω = 4 ÷ 3 ≈ 1.33 A (and 0.67 A in the 6 Ω).

  8. 8. Three 6 Ω resistors are connected in parallel. What is the total resistance?

    1. 18 Ω
    2. 2 Ω
    3. 3 Ω
    4. 0.5 Ω
    Show answer

    Answer: B. 1/R = 1/6 + 1/6 + 1/6 = 3/6 = 1/2, so R = 2 Ω. (n equal resistors in parallel give R ÷ n.)

  9. 9. Two resistors give 9 Ω when joined in series and 2 Ω when joined in parallel. What are they?

    1. 4 Ω and 5 Ω
    2. 3 Ω and 6 Ω
    3. 1 Ω and 8 Ω
    4. 2 Ω and 7 Ω
    Show answer

    Answer: B. 3 + 6 = 9 Ω, and in parallel 3 × 6 ÷ (3 + 6) = 18 ÷ 9 = 2 Ω. (4 and 5 give 20/9 ≈ 2.2 Ω; 1 and 8 give 8/9 Ω; 2 and 7 give 14/9 Ω.)

  10. 10. A house uses a 1 kW iron for 30 minutes a day and four 50 W bulbs for 5 hours a day. How many units does it use in 30 days?

    1. 45 kWh
    2. 15 kWh
    3. 30 kWh
    4. 60 kWh
    Show answer

    Answer: A. Iron: 1 kW × 0.5 h = 0.5 kWh a day. Bulbs: 4 × 0.05 kW = 0.2 kW × 5 h = 1 kWh a day. Total 1.5 kWh a day × 30 = 45 kWh.

  11. 11. A bulb is marked 60 W, 240 V. What current does it draw at its rated voltage?

    1. 4 A
    2. 14 400 A
    3. 0.25 A
    4. 0.5 A
    Show answer

    Answer: C. I = P ÷ V = 60 ÷ 240 = 0.25 A. (Its resistance is 240 ÷ 0.25 = 960 Ω.)

  12. 12. A 2 kW heater runs for 15 minutes. How much energy does it use, in joules?

    1. 3 × 10⁴ J
    2. 1.8 × 10⁶ J
    3. 1.8 × 10³ J
    4. 7.2 × 10⁶ J
    Show answer

    Answer: B. E = P × t = 2000 W × 900 s = 1 800 000 J = 1.8 × 10⁶ J (that is 0.5 kWh).

  13. 13. An appliance rated 1100 W runs on a 220 V supply. Which of these fuses is suitable for it?

    1. 3 A
    2. 6 A
    3. 4 A
    4. 2 A
    Show answer

    Answer: B. Working current I = 1100 ÷ 220 = 5 A. The fuse must be rated just above this, so 6 A; the smaller fuses would melt in normal use.

  14. 14. A heater of resistance 44 Ω is connected to a 220 V supply for 60 s. How much heat is produced?

    1. 300 J
    2. 1100 J
    3. 3 × 10⁵ J
    4. 66 000 J
    Show answer

    Answer: D. H = V²t ÷ R = (220 × 220 × 60) ÷ 44 = 48 400 × 60 ÷ 44 = 1100 W × 60 s = 66 000 J.

  15. 15. A metal-bodied appliance develops a fault and its live wire touches the body. Which safety arrangement stops the user getting a shock on touching it?

    1. A switch in the neutral wire
    2. A thinner connecting cable
    3. Earthing of the metal body
    4. Connecting the appliance in series with others
    Show answer

    Answer: C. The earth wire takes the leakage current to the ground through a low-resistance path, so it does not pass through the user (and the large current usually blows the fuse).

Privacy · Terms · Refunds · Delivery