- Foundation
- About 14 min
- 5 practice questions
Potential difference and Ohm's law
Define potential difference, state Ohm's law V = IR, and see how resistance depends on length and area.
If something looks wrong, please tell us.
Water flows in a pipe because of a difference in pressure. In the same way, charge flows in a wire because of a difference in electrical potential. Ohm's law then links voltage, current and resistance.
Potential difference
The potential difference (voltage) between two points is the work done to move a unit charge between them: V = W ÷ Q. Its unit is the volt (V): 1 V = 1 J/C. It is measured by a voltmeter, connected in parallel across the component.
Ohm's law
At constant temperature, the current through a conductor is directly proportional to the potential difference across it: V = I R. The constant R is the resistance, measured in ohm (Ω): 1 Ω = 1 V/A.
What decides resistance?
For a wire, R = ρ L ÷ A, where L is the length, A is the cross-sectional area and ρ is the resistivity of the material (in Ω m). A longer wire has more resistance; a thicker wire has less. Resistance generally rises with temperature for metals. Copper and silver have low resistivity, which is why wires are made of copper.
Worked examples
Example 1. A 12 V battery is connected across a 4 Ω resistor. I = V ÷ R = 12 ÷ 4 = 3 A.
Example 2. A current of 0.5 A flows through a resistor with a potential difference of 6 V. R = V ÷ I = 6 ÷ 0.5 = 12 Ω.
Example 3. A wire has resistance 10 Ω. If its length is doubled (same material, same area), the resistance becomes 20 Ω.
Example 4. If the wire's radius is halved, its area becomes one-quarter, so its resistance becomes 4 times: 10 × 4 = 40 Ω.
V = IR. R = ρL/A. Voltmeter in parallel, ammeter in series.
Key takeaways
- V = IR; unit of R is the ohm.
- Resistance rises with length and falls with area.
- A voltmeter is connected in parallel.
Check your understanding
-
1. A 24 V battery is connected across an 8 Ω resistor. What current flows?
- 3 A
- 192 A
- 0.33 A
- 16 A
Show answer
Answer: A. I = V ÷ R = 24 ÷ 8 = 3 A.
-
2. How is a voltmeter connected to measure the potential difference across a resistor?
- In series with the resistor
- In series with the cell only
- In parallel with the resistor
- Either way, it makes no difference
Show answer
Answer: C. A voltmeter measures the potential difference between two points, so it is connected across them, in parallel.
-
3. 18 J of work is done in moving 3 C of charge between two points. What is the potential difference between them?
- 54 V
- 6 V
- 0.17 V
- 21 V
Show answer
Answer: B. V = W ÷ Q = 18 ÷ 3 = 6 V (1 V = 1 J/C).
-
4. A wire has a resistance of 12 Ω. Its length is made three times, with the same material and cross-sectional area. What is the new resistance?
- 36 Ω
- 4 Ω
- 12 Ω
- 108 Ω
Show answer
Answer: A. R = ρL/A, so R is proportional to L. Three times the length gives 3 × 12 = 36 Ω.
-
5. A wire of resistance 20 Ω is replaced by a wire of the same material and length but twice the radius. What is its resistance?
- 10 Ω
- 40 Ω
- 80 Ω
- 5 Ω
Show answer
Answer: D. Doubling the radius makes the area 2² = 4 times. R = ρL/A becomes one quarter: 20 ÷ 4 = 5 Ω.
Sign in to keep track of the lessons you finish.