- Foundation
- About 14 min
- 5 practice questions
Heating effect of current and electrical safety
Apply Joule's law H = I²Rt, understand fuses, earthing and short circuits, and solve mixed problems.
If something looks wrong, please tell us.
An electric iron, a toaster and a bulb filament all get hot when a current flows. The same effect can also cause fires if wiring is not safe. This lesson covers both.
Joule's law of heating
When a current I flows through a resistance R for time t, the heat produced is H = I² R t joules. Since V = IR, this can also be written H = VIt = V²t ÷ R. The heat is larger for a bigger current (the effect goes as the square), a larger resistance, and a longer time.
Uses: heaters, irons, geysers, bulbs (the tungsten filament has a very high melting point), and fuses.
Safety devices
- Fuse: a thin wire of low melting point in series with the appliance. If the current exceeds a safe limit, it melts and breaks the circuit.
- MCB (miniature circuit breaker): switches off automatically in an overload and can be reset.
- Earthing: the metal body of an appliance is connected through the third pin to the ground, so that any leakage current flows to earth instead of through the user.
- Short circuit: when live and neutral wires touch directly, resistance is almost zero and a huge current flows, which can cause a fire.
Worked examples
Example 1. A current of 2 A flows through a 10 Ω resistor for 30 s. H = I²Rt = 4 × 10 × 30 = 1200 J.
Example 2. A 2 kW heater runs on 220 V. Current = 2000 ÷ 220 ≈ 9.1 A. A fuse rated 10 A is suitable, because it is just above the working current; a 5 A fuse would melt at once.
Example 3. If the current in a heater is doubled and R is unchanged, the heat per second becomes 2² = 4 times.
H = I²Rt. A fuse melts to protect the circuit; earthing protects the user.
Key takeaways
- Heat H = I²Rt.
- A fuse is placed in series and breaks the circuit when the current is too high.
- Earthing and MCBs make homes safer.
Check your understanding
-
1. A current of 3 A flows through a 4 Ω resistor for 20 s. How much heat is produced?
- 240 J
- 60 J
- 2880 J
- 720 J
Show answer
Answer: D. H = I²Rt = 3² × 4 × 20 = 9 × 4 × 20 = 720 J.
-
2. The current through a heater is doubled and its resistance does not change. What happens to the heat produced per second?
- It becomes 4 times
- It doubles
- It stays the same
- It halves
Show answer
Answer: A. H = I²Rt, so heat goes as the square of the current: 2² = 4 times.
-
3. Which is true of a fuse?
- It is a wire of high melting point connected in parallel with the appliance
- It is a wire of low melting point connected in series with the appliance
- It is a thick wire of very low resistance connected to earth
- It is a wire of low melting point connected in parallel with the appliance
Show answer
Answer: B. A fuse is in series so all the current passes through it; its low melting point lets it melt and break the circuit when the current is too high.
-
4. What is the purpose of earthing the metal body of an appliance?
- It makes the appliance use less electricity
- It increases the current to the appliance
- Any leakage current flows to the ground instead of through the user
- It melts and breaks the circuit when the current is too high
Show answer
Answer: C. The earth wire gives leakage current a low-resistance path to the ground, protecting the user from a shock.
-
5. What happens in a short circuit?
- The circuit is opened, so no current flows
- The live and neutral wires touch, the resistance becomes almost zero and a very large current flows
- The voltage of the supply rises suddenly
- The earth wire is disconnected, so the current stops
Show answer
Answer: B. With almost no resistance, I = V/R becomes very large; the heating can cause a fire unless a fuse or MCB breaks the circuit.
Sign in to keep track of the lessons you finish.