- Practice
- About 14 min
- 5 practice questions
Combining fields: null points, perpendicular contributions and arcs
Add magnetic fields as vectors for several wires, locate points where the net field is zero and use the arc formula in loop problems.
If something looks wrong, please tell us.
In most exam questions on the field of currents, more than one conductor is involved. The method never changes: find the field of each conductor separately, give each a direction with the right-hand rule, and then add them as vectors. This lesson covers the cases that occur again and again.
Method
- Write the field of each wire or arc using its own formula.
- Find each direction (right-hand thumb rule or clock rule).
- Add: along a line, subtract if opposite; at a right angle, use Pythagoras; otherwise resolve into components.
Useful formulae
- Long straight wire: B = μ₀I/(2πr) = 2 × 10⁻⁷ I/r in tesla.
- Circular arc of radius R subtending angle θ at the centre: B = μ₀Iθ/(4πR). So a full circle (θ = 2π) gives μ₀I/(2R), a semicircle gives μ₀I/(4R) and a quarter circle gives μ₀I/(8R).
- A straight piece of wire whose extension passes through the point contributes zero to the field there.
Worked example 1: a null point, currents in the same direction
The numbers are for practice. Two long parallel wires are 0.3 m apart and carry 10 A and 5 A in the same direction. Between the wires the two fields point opposite ways, so there is a point where they cancel. Let it be x from the 10 A wire. Then 2 × 10⁻⁷ × 10/x = 2 × 10⁻⁷ × 5/(0.3 − x). So 10(0.3 − x) = 5x, 3 = 15x and x = 0.2 m. The point is 0.2 m from the 10 A wire and 0.1 m from the 5 A wire. Check: both fields equal 10⁻⁵ T.
Worked example 2: a null point, currents in opposite directions
Now reverse the 5 A current. Between the wires, the fields add, so no zero exists there. A zero lies outside the wires, on the side of the smaller current and at a distance y beyond the 5 A wire, where 5/y = 10/(y + 0.3). This gives 5y + 1.5 = 10y, so y = 0.3 m. It lies 0.3 m beyond the 5 A wire and 0.6 m from the 10 A wire. Check: 5/0.3 = 16.7 and 10/0.6 = 16.7.
Worked example 3: fields at a right angle
Two long wires carry 3 A and 4 A in the same direction. A point P is 0.1 m from each, and the lines from P to the wires are at right angles. The field of the first is 2 × 10⁻⁷ × 3/0.1 = 6 × 10⁻⁶ T and of the second is 2 × 10⁻⁷ × 4/0.1 = 8 × 10⁻⁶ T. Each is perpendicular to its own line from P, so the two fields are at right angles. The resultant is √((6 × 10⁻⁶)² + (8 × 10⁻⁶)²) = 10⁻⁵ T.
Worked example 4: a semicircle
A wire carries 4 A along a straight line, goes round a semicircle of radius 0.1 m and continues along the same straight line (the straight parts, when extended, pass through the centre). The straight parts give no field at the centre. The semicircle gives B = μ₀I/(4R) = 4π × 10⁻⁷ × 4/(4 × 0.1) = π × 10⁻⁶ × 4 ≈ 1.26 × 10⁻⁵ T. A quarter circle with the same current and radius would give half of this, 6.3 × 10⁻⁶ T.
Add fields as vectors. Null point: I₁/r₁ = I₂/r₂. Arc: B = μ₀Iθ/(4πR). A wire pointing at the point gives zero field there.
Traps
- Adding the magnitudes without checking the directions.
- Looking for the null point between wires when the currents are opposite; it lies outside, near the smaller current.
- Forgetting the factor of 1/2 or 1/4 when only part of a loop is present.
Key takeaways
Break each problem into single-conductor fields, give each a direction, and add as vectors. The null point condition is just I₁/r₁ = I₂/r₂, with the positions chosen to suit the directions.
Check your understanding
-
1. Two long wires 0.3 m apart carry 10 A and 5 A in the same direction. The field is zero at a point between them at what distance from the 10 A wire?
- 0.1 m
- 0.15 m
- 0.2 m
- 0.25 m
Show answer
Answer: C. 10/x = 5/(0.3 − x) gives 3 − 10x = 5x, so x = 0.2 m.
-
2. A semicircular wire of radius R carries a current I. The field at its centre is:
- μ₀I/(2R)
- μ₀I/(4R)
- μ₀I/(8R)
- μ₀I/(2πR)
Show answer
Answer: B. A full loop gives μ₀I/(2R). A semicircle is half a loop, so μ₀I/(4R).
-
3. Two magnetic fields of 6 × 10⁻⁶ T and 8 × 10⁻⁶ T act at a point at right angles to each other. The resultant is:
- 1.4 × 10⁻⁵ T
- 2 × 10⁻⁶ T
- 10⁻⁵ T
- 7 × 10⁻⁶ T
Show answer
Answer: C. √(36 + 64) × 10⁻⁶ = 10 × 10⁻⁶ = 10⁻⁵ T.
-
4. A straight wire passes through the point where the field is to be found, with the point on the line of the wire. The field of that wire at the point is:
- zero
- maximum
- μ₀I/2π
- infinite
Show answer
Answer: A. The field of a straight wire at a point along its own line is zero, since sin 0° = 0 in the Biot-Savart law.
-
5. Two wires carry currents of 4 A and 2 A in opposite directions, 0.2 m apart. The field is zero at a point on the line joining them, at:
- 0.2 m from the 2 A wire, outside
- 0.1 m from each wire
- 0.2 m from the 4 A wire, between
- 0.1 m from the 4 A wire, outside
Show answer
Answer: A. For opposite currents the zero lies outside, near the smaller current: 2/y = 4/(y + 0.2) gives y = 0.2 m beyond the 2 A wire.
Sign in to keep track of the lessons you finish.