• Practice
  • About 15 min
  • 5 practice questions

Induction numericals: charge, rotating rods, sliding rods and coils

Solve induction problems on the charge that flows, the emf of a rotating rod, the force on a sliding rod and the peak emf of a rotating coil.

If something looks wrong, please tell us.

Induction numericals look different from one another, but they all rest on one law: the emf equals the rate of change of flux. This lesson collects the four types that appear most often and gives the shortcut for each.

Four patterns

  • Charge that flows: q = I Δt = (ε/R)Δt = NΔΦ/R. It depends on the change of flux and the resistance, not on how fast the change happens.
  • Rod rotating about one end in a perpendicular field: ε = ½Bωl², where l is the length and ω the angular speed.
  • Rod sliding on rails: ε = Blv. The magnetic force on the rod is F = BIl = B²l²v/R, and it must be balanced by an external force for constant speed.
  • Rotating coil: the instantaneous emf is e = NBAω sin ωt, with a peak NBAω and a frequency f = ω/2π.

Worked example 1: a rotating rod

The numbers are for practice. A rod 0.5 m long rotates about one end at an angular speed of 20 rad/s in a perpendicular field of 0.2 T. ε = ½Bωl² = 0.5 × 0.2 × 20 × (0.5)² = 0.5 V. Check by average speed: the midpoint of the rod moves at v = ω l/2 = 5 m/s, and ε = B l v = 0.2 × 0.5 × 5 = 0.5 V.

Worked example 2: the charge that flows

A coil of 100 turns and resistance 5 Ω has the flux through each turn change from 0.02 Wb to zero. The total charge that flows is q = NΔΦ/R = 100 × 0.02/5 = 0.4 C. If the change had taken twice as long, the emf and current would be halved, but the time doubled, and the charge would still be 0.4 C.

Worked example 3: the sliding rod

A rod of length 0.4 m slides at 3 m/s on rails in a perpendicular field of 0.5 T. The circuit has a resistance of 2 Ω. emf: ε = Blv = 0.5 × 0.4 × 3 = 0.6 V. Current: I = ε/R = 0.3 A. Force on the rod: F = BIl = 0.5 × 0.3 × 0.4 = 0.06 N, opposing the motion by Lenz's law. The external power needed is Fv = 0.06 × 3 = 0.18 W. The heating power is I²R = 0.09 × 2 = 0.18 W. The two agree, which is conservation of energy.

Worked example 4: a rotating coil

A coil of 50 turns and area 0.02 m² rotates at 100 rad/s in a field of 0.4 T. The peak emf is NBAω = 50 × 0.4 × 0.02 × 100 = 40 V. The frequency is 100/(2π) ≈ 15.9 Hz. When ωt = 30°, the emf is 40 sin 30° = 20 V.

q = NΔΦ/R. Rotating rod: ½Bωl². Sliding rod: ε = Blv, F = B²l²v/R. Rotating coil: peak = NBAω.

— Patterns to remember

Traps

  • Using Bωl² without the factor of ½.
  • Thinking that the charge depends on the time taken. It does not.
  • Forgetting the minus sign's meaning: the force on a sliding rod always opposes the motion.

Key takeaways

Identify the pattern and write the shortcut formula. In every case, check energy conservation if you can: the mechanical power supplied equals the electrical power dissipated.

Check your understanding

  1. 1. The flux through a coil of 200 turns and resistance 10 Ω changes by 0.01 Wb. The charge that flows is:

    1. 2 C
    2. 0.2 C
    3. 20 C
    4. 0.002 C
    Show answer

    Answer: B. q = NΔΦ/R = 200 × 0.01/10 = 0.2 C.

  2. 2. A rod of length 1 m rotates about one end at 10 rad/s in a field of 0.5 T. The emf between its ends is:

    1. 5 V
    2. 1.25 V
    3. 10 V
    4. 2.5 V
    Show answer

    Answer: D. ε = ½Bωl² = 0.5 × 0.5 × 10 × 1 = 2.5 V.

  3. 3. A rod of length 0.5 m moves at 4 m/s on rails in a field of 0.25 T. The circuit resistance is 1 Ω. The current is:

    1. 0.5 A
    2. 1 A
    3. 2 A
    4. 0.25 A
    Show answer

    Answer: A. ε = Blv = 0.25 × 0.5 × 4 = 0.5 V, and I = ε/R = 0.5 A.

  4. 4. A coil of 100 turns, area 0.05 m², rotates at 40 rad/s in a field of 0.1 T. The peak emf is:

    1. 20 V
    2. 4 V
    3. 200 V
    4. 0.4 V
    Show answer

    Answer: A. NBAω = 100 × 0.1 × 0.05 × 40 = 20 V.

  5. 5. If the speed of a sliding rod is doubled, the magnetic force opposing it:

    1. is quartered
    2. is doubled
    3. stays the same
    4. is quadrupled
    Show answer

    Answer: B. F = B²l²v/R is proportional to v, so doubling v doubles F.

Privacy · Terms · Refunds · Delivery