- Practice
- About 16 min
- 5 practice questions
Transformers, generators and applications
Use the transformer equations, understand AC generators and motors, and see why electricity is transmitted at high voltage.
If something looks wrong, please tell us.
Induction is not just theory. The charger that brings 220 V down to 5 V, the generator in a power station and the electric fan all depend on it. This lesson ties the earlier ideas into devices.
Devices
- AC generator: a coil rotating in a magnetic field has a changing flux, so an alternating emf is induced.
- Electric motor: a current-carrying coil in a magnetic field feels a torque and rotates (the reverse of a generator).
- Transformer (works only with AC): V_s/V_p = N_s/N_p. A step-up transformer has more secondary turns; a step-down has fewer.
- For an ideal transformer, power in = power out: V_pI_p = V_sI_s.
- Eddy currents are induced in solid metal blocks and cause heating; laminated cores reduce them.
Worked examples
Example 1. A transformer steps 220 V down to 11 V. The primary has 1000 turns, so N_s = 1000 × 11/220 = 50 turns.
Example 2. The same ideal transformer delivers 2 A at 11 V. Output power = 22 W. Primary current = 22/220 = 0.1 A.
Example 3 (transmission). To send 11 kW through a line, at 220 V the current is 11 000/220 = 50 A; at 11 000 V it is 1 A. Heat loss is I²R, so the loss falls by (1/50)² = 1/2500. That is why power is transmitted at high voltage and stepped down near homes.
Example 4. A coil of N turns and area A rotates at angular speed ω in a field B. The peak emf is NBAω. Doubling the speed doubles the peak emf.
V_s/V_p = N_s/N_p. Ideal: V_pI_p = V_sI_s. Step-up raises voltage and lowers current. Transformers need AC.
Key takeaways
- Step-up: more secondary turns, less secondary current.
- High-voltage transmission reduces I²R loss.
- A generator converts mechanical to electrical energy; a motor does the reverse.
Check your understanding
-
1. A transformer has 1200 primary turns and steps 220 V down to 11 V. How many secondary turns does it have?
- 24 000
- 120
- 60
- 30
Show answer
Answer: C. Ns = Np × Vs ÷ Vp = 1200 × 11 ÷ 220 = 60 turns.
-
2. An ideal step-up transformer changes 200 V into 1000 V. The secondary current is 0.5 A. What is the primary current?
- 0.1 A
- 0.5 A
- 5 A
- 2.5 A
Show answer
Answer: D. Power out = 1000 V × 0.5 A = 500 W = power in. Ip = 500 W ÷ 200 V = 2.5 A.
-
3. The same power is sent along a line at 10 times the voltage. What happens to the heat lost in the line?
- It falls to one-tenth
- It falls to one-hundredth
- It becomes 10 times as large
- It stays the same
Show answer
Answer: B. For the same power, I falls to 1/10. Heat loss = I²R, so it falls to (1/10)² = 1/100.
-
4. Why are transformer cores made of thin laminated sheets rather than a solid block?
- To reduce eddy currents and the heating they cause
- To increase the eddy currents
- To make the core a permanent magnet
- To allow the transformer to work on DC
Show answer
Answer: A. A changing flux induces eddy currents in solid metal, which waste energy as heat. Laminations break up their paths and reduce them.
-
5. The peak emf of a generator coil is NBAω. If the number of turns is doubled and the speed of rotation is halved, what happens to the peak emf?
- It stays the same
- It doubles
- It halves
- It becomes four times as large
Show answer
Answer: A. The peak emf is proportional to N × ω. Doubling N and halving ω gives 2 × 1/2 = 1, so it is unchanged.
Sign in to keep track of the lessons you finish.