- Practice
- About 14 min
- 5 practice questions
Magnets, field lines and magnetic dipoles
State the properties of magnets and field lines, and use dipole moment, torque and energy for a magnet in a field.
If something looks wrong, please tell us.
Magnetism begins with magnets and the field around them. Even a tiny compass needle shows the Earth's field. This lesson covers the properties of magnets and the torque on a magnetic dipole, which is the basis for motors and meters.
Properties and field lines
- A freely suspended magnet points roughly north-south; its two ends are the north and south poles.
- Like poles repel; unlike poles attract. Poles cannot be isolated: cutting a magnet gives two smaller magnets.
- Magnetic field lines form closed loops, leaving the north pole and entering the south pole outside the magnet.
- Field lines never intersect, and the field is stronger where the lines are closer together.
- Magnetic materials: diamagnetic (weakly repelled, e.g. copper, water), paramagnetic (weakly attracted, e.g. aluminium) and ferromagnetic (strongly attracted, e.g. iron, nickel, cobalt).
Magnetic dipole in a field
A bar magnet or a current loop has a magnetic dipole moment M (unit A m²). A dipole in a uniform field B at angle θ to the field feels a torque τ = M B sin θ and has potential energy U = −M B cos θ. The torque is zero when the dipole lines up with the field (θ = 0), which is the stable position. The net force on a dipole in a uniform field is zero.
Worked examples
Example 1. A magnet of dipole moment M = 0.5 A m² is at 90° to a field B = 0.2 T. τ = 0.5 × 0.2 × sin 90° = 0.1 N m.
Example 2. The same magnet at 30°: τ = 0.5 × 0.2 × 0.5 = 0.05 N m.
Example 3. Work done in rotating the magnet from θ = 0° to 90°: W = U(90°) − U(0°) = 0 − (−MB) = MB = 0.1 J.
Example 4. A current loop of area 0.02 m² carries 5 A, so M = IA = 0.1 A m². For N = 50 turns, M = 5 A m².
τ = MB sin θ. U = −MB cos θ. Magnetic poles never exist alone. Field lines are closed loops.
Key takeaways
- Monopoles do not exist; field lines are closed loops.
- Torque is greatest at 90° and zero when aligned.
- A current loop acts as a magnetic dipole with M = NIA.
Check your understanding
-
1. A magnet of dipole moment 0.4 A m² is placed at 90° to a uniform field of 0.5 T. What torque acts on it?
- 0.1 N m
- 0.2 N m
- 0.8 N m
- Zero
Show answer
Answer: B. τ = M B sin θ = 0.4 A m² × 0.5 T × sin 90° = 0.2 N m.
-
2. A magnet with M = 2 A m² makes an angle of 30° with a field of 0.3 T. What is the torque on it?
- 0.6 N m
- 0.52 N m
- 0.15 N m
- 0.3 N m
Show answer
Answer: D. τ = M B sin 30° = 2 × 0.3 × 0.5 = 0.3 N m. (0.52 N m would wrongly use cos 30°.)
-
3. At what angle between its dipole moment and a uniform field is a magnet in stable equilibrium?
- 0°
- 90°
- 180°
- 45°
Show answer
Answer: A. The torque is zero at 0°, where U = −MB is the minimum, so this is the stable position. At 90° the torque is maximum; 180° gives zero torque but maximum energy.
-
4. Copper is weakly repelled by a strong magnet. What kind of magnetic material is it?
- Paramagnetic
- Ferromagnetic
- Diamagnetic
- A permanent magnet
Show answer
Answer: C. Diamagnetic materials such as copper and water are weakly repelled; paramagnetic ones are weakly attracted; ferromagnetic ones are strongly attracted.
-
5. A coil of 20 turns, each of area 0.05 m², carries 2 A. What is its magnetic dipole moment?
- 0.1 A m²
- 1 A m²
- 2 A m²
- 40 A m²
Show answer
Answer: C. M = N I A = 20 × 2 A × 0.05 m² = 2 A m².
Sign in to keep track of the lessons you finish.