- Practice
- About 15 min
- 5 practice questions
Inductance, AC and transformers: a mixed numerical set
Practise self-inductance, mutual inductance, r.m.s. values, transformer efficiency and transmission loss in one set.
If something looks wrong, please tell us.
The last group of problems in this chapter draws on several ideas at once: inductors, alternating current and transformers. The best way to prepare is to work one of each kind and note the formula that makes it quick.
Formulae for the set
- Self-induced emf: |ε| = L ΔI/Δt. Energy in an inductor: U = ½LI².
- Mutual inductance: |ε₂| = M ΔI₁/Δt.
- AC: V_rms = V₀/√2 and I_rms = I₀/√2. Power in a resistor: P = I_rms² R = V_rms²/R.
- Transformer: V_s/V_p = N_s/N_p. Efficiency = output power / input power.
- Line loss: P_loss = I²R, with I = P/V.
Worked example 1: an inductor
The values are for practice. An inductor of 0.4 H has its current raised from 0 to 5 A in 0.1 s. The average emf is L ΔI/Δt = 0.4 × 5/0.1 = 20 V. The energy stored at 5 A is ½LI² = 0.5 × 0.4 × 25 = 5 J.
Worked example 2: mutual inductance
Two coils have a mutual inductance of 0.5 H. The current in the first falls from 4 A to zero in 0.02 s. The average emf in the second coil is M ΔI/Δt = 0.5 × 4/0.02 = 100 V.
Worked example 3: an AC supply
An AC source has a peak voltage of 141 V. V_rms = 141/1.41 ≈ 100 V. Connected to a 50 Ω resistor, the r.m.s. current is 100/50 = 2 A and the average power is I_rms²R = 4 × 50 = 200 W. The same power would be given by 100 V of DC.
Worked example 4: a transformer with loss
A transformer steps 220 V down to 22 V. The secondary delivers 5 A, so the output power is 22 × 5 = 110 W. If the efficiency is 90%, the input power is 110/0.9 ≈ 122 W, and the primary current is 122/220 ≈ 0.56 A. For an ideal transformer it would have been 110/220 = 0.5 A. The missing power appears as heat in the coils and the core.
Worked example 5: transmission
100 kW is sent through a line of total resistance 5 Ω. At 10 kV the current is 100 000/10 000 = 10 A, and the loss is 10² × 5 = 500 W, which is 0.5% of the power. At 1 kV the current is 100 A, and the loss is 100² × 5 = 50 000 W = 50 kW, half the power. So a ten-fold fall in voltage makes the loss a hundred times as great.
ε = L ΔI/Δt; U = ½LI². V_rms = V₀/√2. Efficiency = P_out/P_in. Line loss = (P/V)²R.
Traps
- Using peak values for average power.
- Taking the input power equal to the output power when an efficiency is given.
- Forgetting that the loss depends on the line current, not the supply voltage directly.
Key takeaways
Identify which of the five formulae the problem needs, substitute with units, and check the answer for sense: stored energy in joules, line loss less than the power sent, efficiency less than 100%.
Check your understanding
-
1. An inductor of 2 H carries a current of 3 A. The energy stored in it is:
- 6 J
- 9 J
- 12 J
- 3 J
Show answer
Answer: B. U = ½LI² = 0.5 × 2 × 9 = 9 J.
-
2. The peak voltage of an AC source is 200 V. The r.m.s. voltage is about:
- 200 V
- 283 V
- 100 V
- 141 V
Show answer
Answer: D. V_rms = 200/√2 ≈ 141 V.
-
3. A transformer is 80% efficient. Its output power is 80 W. The input power is:
- 64 W
- 80 W
- 100 W
- 160 W
Show answer
Answer: C. Input = output/efficiency = 80/0.8 = 100 W.
-
4. Power is sent at 2000 V instead of 200 V, the power and line resistance being unchanged. The line loss becomes:
- 1/10 of the original
- 10 times the original
- 1/100 of the original
- the same as before
Show answer
Answer: C. The current falls to 1/10, and the loss, I²R, falls to 1/100 of the original.
-
5. A current in a coil of M = 0.2 H next to another changes by 5 A in 0.1 s. The average induced emf in the other coil is:
- 10 V
- 1 V
- 50 V
- 2.5 V
Show answer
Answer: A. ε = M ΔI/Δt = 0.2 × 5/0.1 = 10 V.
Sign in to keep track of the lessons you finish.