- Practice
- 15 practice questions
Final self-assessment: Magnetism practice
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions on magnetism practice first, then check your answers and read each explanation. The questions follow the lessons in order - questions 1-3: lesson 1 (Magnets, field lines and magnetic dipoles); questions 4-6: lesson 2 (Magnetic field due to current); questions 7-9: lesson 3 (Force on a moving charge and on a current); questions 10-12: lesson 4 (Electromagnetic induction); questions 13-15: lesson 5 (Transformers, generators and applications). Revisit the lesson for any question you missed.
Final self-assessment
-
1. How much work is needed to turn a magnet of moment 0.5 A m² from alignment with a 0.4 T field (θ = 0°) to the opposite direction (θ = 180°)?
- 0.2 J
- 0.4 J
- Zero
- 0.8 J
Show answer
Answer: B. U = −MB cos θ. W = U(180°) − U(0°) = MB − (−MB) = 2MB = 2 × 0.5 × 0.4 = 0.4 J.
-
2. Which material is correctly matched with its type of magnetism?
- Copper - ferromagnetic
- Iron - diamagnetic
- Aluminium - paramagnetic
- Water - paramagnetic
Show answer
Answer: C. Aluminium is weakly attracted (paramagnetic). Copper and water are diamagnetic; iron is ferromagnetic.
-
3. A bar magnet is held at 60° to a uniform magnetic field. What does it experience?
- A net force but no torque
- Both a net force and a torque
- Neither a force nor a torque
- A torque but no net force
Show answer
Answer: D. In a uniform field the forces on the two poles are equal and opposite, so the net force is zero, but they form a couple: τ = MB sin 60°, which is not zero.
-
4. At what distance from a long straight wire carrying 10 A is the field 4 × 10⁻⁵ T? (μ₀/2π = 2 × 10⁻⁷ T m/A)
- 0.5 cm
- 2 cm
- 20 cm
- 5 cm
Show answer
Answer: D. r = 2 × 10⁻⁷ × I ÷ B = 2 × 10⁻⁷ × 10 ÷ (4 × 10⁻⁵) = 2 × 10⁻⁶ ÷ 4 × 10⁻⁵ = 0.05 m = 5 cm.
-
5. A solenoid has 1000 turns over 0.5 m. What current gives a field of 2.51 × 10⁻³ T inside it? (μ₀ = 4π × 10⁻⁷ T m/A)
- 2 A
- 0.5 A
- 1 A
- 4 A
Show answer
Answer: C. n = 1000 ÷ 0.5 = 2000 per metre. I = B ÷ (μ₀ n) = 2.51 × 10⁻³ ÷ (4π × 10⁻⁷ × 2000) = 2.51 × 10⁻³ ÷ 2.51 × 10⁻³ = 1 A.
-
6. A single circular loop of radius 0.2 m carries 4 A. What is the field at its centre? (μ₀ = 4π × 10⁻⁷ T m/A)
- 1.26 × 10⁻⁵ T
- 6.28 × 10⁻⁶ T
- 2.51 × 10⁻⁵ T
- 4 × 10⁻⁶ T
Show answer
Answer: A. B = μ₀I/(2R) = 4π × 10⁻⁷ × 4 ÷ 0.4 = 4π × 10⁻⁶ ≈ 1.26 × 10⁻⁵ T. (4 × 10⁻⁶ T wrongly uses the straight-wire formula.)
-
7. An electron (m = 9.1 × 10⁻³¹ kg, charge 1.6 × 10⁻¹⁹ C) moves at 3 × 10⁶ m/s at right angles to a field of 2 × 10⁻³ T. What is the radius of its path?
- About 1.7 cm
- About 0.85 cm
- About 0.43 cm
- About 8.5 cm
Show answer
Answer: B. r = mv/(qB) = 9.1 × 10⁻³¹ × 3 × 10⁶ ÷ (1.6 × 10⁻¹⁹ × 2 × 10⁻³) = 2.73 × 10⁻²⁴ ÷ 3.2 × 10⁻²² ≈ 8.5 × 10⁻³ m ≈ 0.85 cm.
-
8. Two long parallel wires 0.05 m apart carry 4 A and 5 A in opposite directions. What is the force per metre between them? (μ₀/2π = 2 × 10⁻⁷ T m/A)
- 8 × 10⁻⁵ N/m, attractive
- 8 × 10⁻⁵ N/m, repulsive
- 4 × 10⁻⁶ N/m, repulsive
- 2 × 10⁻⁵ N/m, attractive
Show answer
Answer: B. F/L = 2 × 10⁻⁷ × 4 × 5 ÷ 0.05 = 4 × 10⁻⁶ ÷ 0.05 = 8 × 10⁻⁵ N/m. Currents in opposite directions repel.
-
9. Two protons enter the same uniform magnetic field at right angles to it, with speeds v and 3v. What is the ratio of their periods of revolution?
- 1 : 3
- 3 : 1
- 1 : 9
- 1 : 1
Show answer
Answer: D. T = 2πm/(qB) does not depend on speed, so both periods are equal. Only the radii differ, in the ratio 1 : 3.
-
10. A coil of 50 turns, area 0.02 m², has a perpendicular field that rises from 0.1 T to 0.5 T in 0.04 s. What is the average induced emf?
- 10 V
- 0.2 V
- 12.5 V
- 1 V
Show answer
Answer: A. ΔΦ per turn = 0.02 × (0.5 − 0.1) = 0.008 Wb. |ε| = N ΔΦ/Δt = 50 × 0.008 ÷ 0.04 = 10 V.
-
11. A rod 0.8 m long moves at 5 m/s at right angles to a field of 0.25 T. It is part of a circuit of resistance 4 Ω. What current flows?
- 1 A
- 4 A
- 0.25 A
- 5 A
Show answer
Answer: C. ε = B L v = 0.25 × 0.8 × 5 = 1 V. I = 1 V ÷ 4 Ω = 0.25 A.
-
12. Suppose an induced current flowed so as to help the change that caused it. What would follow?
- Nothing unusual; Lenz's law allows either direction
- The induced emf would always be zero
- Energy would be created from nothing, breaking the conservation of energy
- The coil would stop conducting
Show answer
Answer: C. Lenz's law states that the induced current opposes its cause. If it aided the change, the effect would feed itself and produce energy from nothing, so Lenz's law expresses energy conservation.
-
13. 11 kW is sent along a line, first at 220 V and then at 22 000 V. By what factor does the heat lost in the line fall?
- To 1/10 000
- To 1/100
- To 1/1000
- To 1/10
Show answer
Answer: A. I = 11 000 ÷ 220 = 50 A, then 11 000 ÷ 22 000 = 0.5 A, so I falls to 1/100. Loss = I²R falls to (1/100)² = 1/10 000.
-
14. An ideal transformer has 500 primary and 2500 secondary turns and a 230 V input. The secondary current is 0.4 A. What is the primary current?
- 0.08 A
- 0.4 A
- 20 A
- 2 A
Show answer
Answer: D. Vs = 230 × 2500 ÷ 500 = 1150 V. Power = 1150 × 0.4 = 460 W. Ip = 460 W ÷ 230 V = 2 A.
-
15. A transformer is connected to a steady 12 V battery. Why is there no output from the secondary once the current has settled?
- The battery's voltage is too low for any transformer
- A steady current gives a constant flux, so no emf is induced in the secondary
- The iron core blocks direct current
- The secondary has too many turns
Show answer
Answer: B. Induction needs a changing flux. A steady DC current produces a constant flux in the core, so nothing is induced; that is why transformers work only on AC.
Sign in to keep track of the lessons you finish.