• Foundation
  • About 14 min
  • 5 practice questions

Elasticity, stress and strain

Understand elastic behaviour, define stress, strain and Young's modulus, and apply Hooke's law.

If something looks wrong, please tell us.

A rubber band returns to its shape after stretching, but a lump of clay does not. This property of returning to the original shape is called elasticity.

Elasticity

A body is elastic if it regains its original shape and size after the deforming force is removed. Steel is more elastic than rubber in the technical sense, because for the same deformation it develops a larger restoring force. If a body does not regain its shape, it is plastic, like clay.

Stress and strain

  • Stress = restoring force ÷ area = F ÷ A. Unit: N/m² or pascal (Pa).
  • Strain = change in length ÷ original length = ΔL ÷ L. It has no unit.

Hooke's law: within the elastic limit, stress is proportional to strain. The ratio is a constant called the modulus of elasticity. For a stretched wire it is Young's modulus Y = stress ÷ strain = (F ÷ A) ÷ (ΔL ÷ L). For a spring, Hooke's law is written F = kx, where k is the spring constant and x the extension.

Worked examples

Example 1. A force of 200 N acts on a wire of cross-section 4 × 10⁻⁶ m². Stress = 200 ÷ (4 × 10⁻⁶) = 5 × 10⁷ Pa.

Example 2. The wire is originally 2 m long and stretches by 2 mm (0.002 m). Strain = 0.002 ÷ 2 = 0.001 = 10⁻³.

Example 3. For the wire above, Young's modulus Y = (5 × 10⁷) ÷ (10⁻³) = 5 × 10¹⁰ Pa.

Example 4. A spring has k = 200 N/m and is stretched by 0.05 m. F = kx = 200 × 0.05 = 10 N.

Stress = F ÷ A. Strain = ΔL ÷ L (no unit). Within the elastic limit, stress ∝ strain. Spring: F = kx.

— Hooke's law

Key takeaways

  • Stress = force per unit area; strain = fractional change in length.
  • Hooke's law holds within the elastic limit.
  • Young's modulus = stress ÷ strain.

Check your understanding

  1. 1. A force of 200 N acts on a wire of cross-sectional area 4 × 10⁻⁶ m². What is the stress?

    1. 5 × 10⁵ Pa
    2. 5 × 10⁷ Pa
    3. 5 × 10⁶ Pa
    4. 8 × 10⁸ Pa
    Show answer

    Answer: B. Stress = F ÷ A = 200 ÷ (4 × 10⁻⁶) = 50 × 10⁶ = 5 × 10⁷ Pa (N/m²).

  2. 2. A wire 3 m long extends by 1.5 mm when stretched. What is the strain?

    1. 5 × 10⁻¹
    2. 4.5 × 10⁻³
    3. 2 × 10³
    4. 5 × 10⁻⁴
    Show answer

    Answer: D. Strain = ΔL ÷ L = 0.0015 m ÷ 3 m = 0.0005 = 5 × 10⁻⁴. It has no unit.

  3. 3. A spring with spring constant 500 N/m is stretched by 2 cm. What force is needed?

    1. 1000 N
    2. 250 N
    3. 1 N
    4. 10 N
    Show answer

    Answer: D. Convert to metres: x = 0.02 m. F = kx = 500 × 0.02 = 10 N.

  4. 4. What does Hooke's law state?

    1. Stress is proportional to strain for any load, however large
    2. Within the elastic limit, stress is proportional to strain
    3. Strain is inversely proportional to stress
    4. Stress is proportional to the square of the strain
    Show answer

    Answer: B. Hooke's law holds only within the elastic limit, where stress ∝ strain. The constant ratio is the modulus of elasticity.

  5. 5. In the technical sense used in physics, which is more elastic, steel or rubber?

    1. Rubber, because it stretches more easily
    2. Rubber, because it is softer
    3. Steel, because it develops a larger restoring force for the same deformation
    4. Both are equally elastic
    Show answer

    Answer: C. Elasticity in physics is judged by the restoring force for a given deformation. Steel develops a much larger restoring force than rubber, so steel is more elastic.

Sign in to keep track of the lessons you finish.

Next lesson → Surface tension and viscosity

Privacy · Terms · Refunds · Delivery