- Foundation
- About 12 min
- 5 practice questions
Surface tension and viscosity
Explain surface tension, capillary rise and viscosity with everyday examples such as drops, soap and honey.
If something looks wrong, please tell us.
Small insects can walk on water, and honey pours much slower than water. Both effects come from forces between molecules in a liquid.
Surface tension
Molecules inside a liquid are pulled equally in all directions. Molecules at the surface are pulled only inward and sideways, so the surface behaves like a stretched elastic skin. This property is called surface tension. It is the force acting per unit length along the surface, so its unit is N/m.
- Small drops and bubbles are spherical because a sphere has the least surface area for a given volume.
- Soaps and detergents lower the surface tension of water, helping it wet and clean fabric.
- Rising temperature lowers surface tension.
- A needle can float on water carefully placed because of surface tension.
Capillary rise
In a thin tube, water rises above the outside level because adhesion to glass is stronger than cohesion in water. This is capillarity. Oil rises up a wick and water moves through soil and plant stems by the same effect. Mercury behaves oppositely, because its cohesion is stronger: it falls inside a glass capillary.
Viscosity
Viscosity is the internal friction of a fluid: it resists the flow of one layer over another. Honey, glycerine and engine oil are more viscous than water. Viscosity of liquids decreases with a rise in temperature, which is why heated oil flows easily; in gases it increases with temperature.
Worked examples
Example 1. A film of soap solution has a surface tension of 0.03 N/m. The force on a 0.1 m long wire of the frame from one surface = 0.03 × 0.1 = 0.003 N.
Example 2. Why does hot oil spread easily on a pan? Heating reduces viscosity, so it flows more freely.
Example 3. Why does a raindrop falling in air become spherical? Surface tension pulls the liquid into the shape with the smallest surface area.
Surface tension makes liquid surfaces behave like stretched skin (unit N/m). Viscosity is the internal friction of fluids.
Key takeaways
- Surface tension acts like a skin and shapes drops; heat and soap lower it.
- Capillary rise happens when adhesion beats cohesion.
- Viscosity is internal friction in a fluid and falls as liquids are heated.
Check your understanding
-
1. Why are small raindrops and bubbles nearly spherical?
- Surface tension pulls the liquid into the shape with the least surface area, which is a sphere
- Gravity pulls equally on all sides of the drop
- The viscosity of air presses the drop into a ball
- Adhesion between water and air makes the drop round
Show answer
Answer: A. Surface tension makes a liquid surface act like a stretched skin that tries to shrink. For a given volume, a sphere has the smallest surface area.
-
2. What is the SI unit of surface tension?
- N/m²
- N m
- N/m
- kg/m³
Show answer
Answer: C. Surface tension is a force per unit length along the surface, so its unit is newton per metre (N/m).
-
3. Water rises inside a thin glass tube dipped in it. Why?
- Cohesion within water is stronger than its adhesion to glass
- The viscosity of water pulls it upward
- The air pressure inside the tube is higher than outside
- Adhesion between water and glass is stronger than the cohesion within water
Show answer
Answer: D. This is capillarity. Water rises because its adhesion to glass is stronger than its cohesion. Mercury, whose cohesion is stronger, falls instead.
-
4. Honey is warmed before pouring. What happens to its viscosity?
- It decreases, so it flows more easily
- It increases
- It stays the same
- It becomes zero
Show answer
Answer: A. The viscosity of a liquid decreases as its temperature rises, so warm honey or heated oil flows more freely.
-
5. A soap film has a surface tension of 0.03 N/m. What force does one surface of the film exert on a 0.1 m long wire of the frame?
- 0.3 N
- 0.003 N
- 0.03 N
- 3 N
Show answer
Answer: B. Force = surface tension × length = 0.03 N/m × 0.1 m = 0.003 N (for one surface).
Sign in to keep track of the lessons you finish.