- Foundation
- 15 practice questions
Final self-assessment: simple machines
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions before you check any answer. They are a little harder than the checks after each lesson. Which lesson each question comes from - questions 1-3: lesson 1, "What is a machine? Mechanical advantage and efficiency"; questions 4-6: lesson 2, "Levers"; questions 7-9: lesson 3, "Pulleys"; questions 10-12: lesson 4, "Inclined plane, wedge, screw and wheel and axle"; questions 13-15: lesson 5, "Simple machines: mixed practice". Revisit that lesson for any question you missed.
Final self-assessment
-
1. An effort of 150 N moves 2 m and lifts a 450 N load through 0.5 m. What are the efficiency and the energy lost to friction?
- 75%, with 75 J lost
- 75%, with 225 J lost
- 133%, with no energy lost
- 25%, with 75 J lost
Show answer
Answer: A. Work input = 150 × 2 = 300 J. Work output = 450 × 0.5 = 225 J. Efficiency = 225 ÷ 300 = 75%. Energy lost = 300 − 225 = 75 J. (MA = 3, VR = 4, 3 ÷ 4 = 75% agrees.)
-
2. A machine has MA = 2.5 and efficiency 50%. What is its velocity ratio?
- 1.25
- 2
- 125
- 5
Show answer
Answer: D. VR = MA ÷ efficiency = 2.5 ÷ 0.5 = 5.
-
3. Which statement is true of every real machine?
- Its MA is always greater than 1
- Its work output is less than its work input
- Its MA equals its VR
- Its efficiency can exceed 100% if its VR is large
Show answer
Answer: B. Friction always wastes some work, so output < input and efficiency < 100%. MA can be less than 1 (third-class levers), and MA equals VR only for an ideal machine.
-
4. A crowbar has a load arm of 0.5 m and an effort arm of 2 m. What effort lifts a load of 100 N (ideal)?
- 25 N
- 400 N
- 50 N
- 4 N
Show answer
Answer: A. E × 2 = 100 × 0.5, so E = 50 ÷ 2 = 25 N. MA = 2 ÷ 0.5 = 4.
-
5. Classify these levers in order: a nutcracker, a fishing rod, a see-saw.
- First, third, second
- Third, second, first
- Second, third, first
- Second, first, third
Show answer
Answer: C. Nutcracker: load between fulcrum and effort (second). Fishing rod: effort between fulcrum and load (third). See-saw: fulcrum in the middle (first).
-
6. A wheelbarrow carries a 400 N load acting 0.5 m from the wheel axle. The handles are 1.5 m from the axle. What upward effort is needed (ideal)?
- 1200 N
- About 133 N
- 300 N
- 200 N
Show answer
Answer: B. The axle is the fulcrum. E × 1.5 = 400 × 0.5 = 200, so E = 200 ÷ 1.5 ≈ 133 N.
-
7. A pulley system with 4 supporting strands is 75% efficient. What effort lifts a 600 N load?
- 150 N
- 800 N
- 450 N
- 200 N
Show answer
Answer: D. VR = 4. Actual MA = 0.75 × 4 = 3. Effort = 600 ÷ 3 = 200 N. (150 N would be the ideal effort.)
-
8. A single fixed pulley is used to lift a 50 N bucket (ideal). Which statement is correct?
- The effort is 25 N, since the pulley halves the force
- The effort is 100 N, since the rope passes over the pulley
- No effort is needed once the bucket starts rising
- The effort is 50 N, but pulling down is more convenient
Show answer
Answer: D. A fixed pulley has MA = 1: it only changes the direction of the force. The effort equals the 50 N load, but we can pull down and use our body weight.
-
9. An ideal pulley system with 3 supporting strands lifts a 300 N load by 1.5 m. What are the effort and the distance the effort moves?
- 100 N and 0.5 m
- 100 N and 4.5 m
- 900 N and 4.5 m
- 300 N and 1.5 m
Show answer
Answer: B. Ideal MA = VR = 3. Effort = 300 ÷ 3 = 100 N. Effort distance = 3 × 1.5 = 4.5 m. Check: 100 × 4.5 = 450 J = 300 × 1.5.
-
10. A smooth ramp is 6 m long and 2 m high. What effort pushes a 900 N load up it?
- 2700 N
- 450 N
- 300 N
- 150 N
Show answer
Answer: C. Ideal MA = 6 ÷ 2 = 3. Effort = 900 ÷ 3 = 300 N.
-
11. A wheel of radius 30 cm is fixed to an axle of radius 6 cm. What ideal effort on the wheel lifts a 250 N load hanging from the axle?
- 50 N
- 1250 N
- 125 N
- 25 N
Show answer
Answer: A. Ideal MA = 30 ÷ 6 = 5. Effort = 250 ÷ 5 = 50 N.
-
12. Which screw gives the greater mechanical advantage?
- One with wider threads (larger pitch), needing fewer turns
- Neither: the thread spacing does not affect the MA
- One with closer threads (smaller pitch), at the cost of more turns
- One with closer threads, which also needs fewer turns
Show answer
Answer: C. Closer threads (smaller pitch) mean a gentler inclined plane wrapped round the cylinder: a greater MA, but more turns are needed for the same advance.
-
13. A load of 90 N is balanced by an effort of 30 N on a lever. If the effort arm is 0.9 m, what is the load arm?
- 2.7 m
- 0.1 m
- 3 m
- 0.3 m
Show answer
Answer: D. Effort × effort arm = load × load arm: 30 × 0.9 = 90 × load arm, so load arm = 27 ÷ 90 = 0.3 m.
-
14. An ideal pulley system with VR = 4 lifts a 400 N load by 1 m. What are the effort and the distance it moves?
- 100 N and 4 m
- 100 N and 0.25 m
- 1600 N and 4 m
- 400 N and 1 m
Show answer
Answer: A. Effort = 400 ÷ 4 = 100 N. Distance = 4 × 1 = 4 m. Work in = 100 × 4 = 400 J = work out = 400 × 1.
-
15. A 1000 N load is pushed up a ramp 10 m long to a height of 2 m with an actual effort of 250 N. What is the efficiency?
- 25%
- 80%
- 125%
- 20%
Show answer
Answer: B. Work output = 1000 × 2 = 2000 J. Work input = 250 × 10 = 2500 J. Efficiency = 2000 ÷ 2500 = 80%. (MA = 4, VR = 5.)
Sign in to keep track of the lessons you finish.