• Foundation
  • About 13 min
  • 5 practice questions

Work, energy and power: the idea behind every machine

Calculate work, power and the energy needed to lift loads, and see why a machine can change force but never give out more work than it takes in.

If something looks wrong, please tell us.

Every simple machine obeys one rule: you cannot get out more work than you put in. To use that rule you need to measure work and power. This lesson explains both with everyday examples, using g = 10 m/s² for weight.

Work

In science, work is done when a force moves something in the direction of the force. Work = force × distance moved in the direction of the force, W = F × d. The unit is the joule (J): one joule is the work done when a force of one newton moves an object one metre. Pushing a wall hard does no work, because the wall does not move. Carrying a bag along a level road also does no work by your upward holding force, because the bag moves sideways, not upwards.

Energy and the machine rule

Energy is the ability to do work and is also measured in joules. A load lifted to a height h gains gravitational energy equal to mgh, which is the same as weight × height. A machine only transfers energy from where it is put in (the effort) to where it is wanted (the load). Some always escapes as heat due to friction. So: work done by the effort = work done on the load + work wasted. A machine can have a large MA, but then the effort must move through a larger distance.

Power

Power tells how fast work is done: Power = work ÷ time. The unit is the watt (W), one joule per second. A larger unit is the kilowatt, 1 kW = 1000 W. Energy bills use the kilowatt-hour (kWh), the energy used by a 1 kW appliance running for one hour: 1 kWh = 1000 × 3600 = 3 600 000 J.

Worked examples

Example 1: lifting a bucket. A bucket of mass 20 kg is lifted 5 m from a well. Weight = 20 × 10 = 200 N. Work = 200 × 5 = 1000 J. If this takes 20 s, the power is 1000 ÷ 20 = 50 W.

Example 2: climbing stairs. A student of mass 50 kg climbs 3 m in 6 s. Work against gravity = 500 × 3 = 1500 J. Power = 1500 ÷ 6 = 250 W.

Example 3: an ideal machine. A load of 1000 N is raised through 2 m. Work on the load = 1000 × 2 = 2000 J. If an ideal pulley system is used, the effort is 250 N and it moves 8 m. Work by the effort = 250 × 8 = 2000 J. The two are equal, so the machine has made the work easier, not smaller. MA = 4 and VR = 4.

Example 4: a real machine. In the same set-up, friction means that an effort of 320 N is needed over the same 8 m. Work put in = 320 × 8 = 2560 J, work got out = 2000 J, so 560 J is wasted as heat. Efficiency = 2000 ÷ 2560 × 100 = 78.1%.

Example 5: electrical energy. A 2 kW pump runs for 3 hours. Energy used = 2 × 3 = 6 kWh = 6 × 3 600 000 = 2.16 × 10⁷ J.

Work = force × distance (in the direction of the force). Power = work ÷ time. Work in = work out + work wasted.

— Rule to remember

Key takeaways

  • Work is force times distance; no movement along the force means no work.
  • Power is the rate of doing work, in watts.
  • A machine trades force for distance but cannot create energy.
  • Efficiency compares the useful work out with the work in.

Check your understanding

  1. 1. A force of 50 N moves a box 4 m along the direction of the force. The work done is:

    1. 12.5 J
    2. 54 J
    3. 46 J
    4. 200 J
    Show answer

    Answer: D. W = F × d = 50 × 4 = 200 J.

  2. 2. A 10 kg object is lifted through 2 m. The work done against gravity is (g = 10 m/s²):

    1. 20 J
    2. 200 J
    3. 100 J
    4. 2000 J
    Show answer

    Answer: B. Weight = 100 N. Work = 100 × 2 = 200 J.

  3. 3. A motor does 6000 J of work in 30 s. Its power is:

    1. 200 W
    2. 180 000 W
    3. 20 W
    4. 6030 W
    Show answer

    Answer: A. Power = work ÷ time = 6000 ÷ 30 = 200 W.

  4. 4. A machine takes in 800 J and gives out 600 J of useful work. Its efficiency is:

    1. 133%
    2. 25%
    3. 60%
    4. 75%
    Show answer

    Answer: D. Efficiency = 600 ÷ 800 × 100 = 75%. The other 200 J is lost, mainly as heat from friction.

  5. 5. Which statement about machines is correct?

    1. A machine can give out more work than it takes in
    2. A machine can change the size of a force but not the work
    3. A machine always needs more effort than load
    4. A machine works without any energy supply
    Show answer

    Answer: B. A machine can multiply force or change its direction, but the useful work out is never more than the work in.

Privacy · Terms · Refunds · Delivery