• Foundation
  • About 14 min
  • 5 practice questions

Pulley systems step by step: counting strands and the weight of the pulley

Count supporting strands, find the effort when the movable pulley has weight, and relate rope speed to load speed.

If something looks wrong, please tell us.

A pulley diagram can look like a tangle of rope. The secret is to count only the strands that pull the load upwards. Once you know the number of strands, every question about effort, distance, speed and efficiency follows from a few lines of working. Take g = 10 m/s².

How to count strands

  1. Look at the movable block, the one that rises with the load.
  2. Count the rope sections that are attached to this block or pass round its wheels and pull it upwards.
  3. Do not count the section that runs from a fixed pulley to the person's hand. It pulls the person's hand, not the block. (If the rope comes off the movable block directly into the hand, that section does count.)
  4. The number you find is n. For an ideal system, VR = MA = n.

The formulas

  • Ideal effort = load ÷ n.
  • If the movable block weighs w, the effort (ignoring friction) = (load + w) ÷ n.
  • Rope pulled = n × distance the load rises, and the rope speed = n × the load's speed.
  • Efficiency = MA ÷ VR = load ÷ (n × effort).

Worked examples

Example 1: a pulley system with weight. A system has two movable pulleys, giving n = 4 strands. The load is 800 N. The ideal effort = 800 ÷ 4 = 200 N. The movable block weighs 40 N, so the effort = (800 + 40) ÷ 4 = 210 N. Efficiency = 800 ÷ (4 × 210) = 800 ÷ 840 = 95.2%. The only loss here is due to the weight of the pulleys.

Example 2: rope speed. A worker pulls 6 m of rope in 12 s. The rope speed is 6 ÷ 12 = 0.5 m/s. With n = 4, the load rises 6 ÷ 4 = 1.5 m in 12 s, which is a speed of 0.125 m/s. The load moves four times slower than the rope.

Example 3: real efficiency. A system with n = 3 lifts a load of 450 N when the effort is 180 N. MA = 450 ÷ 180 = 2.5. VR = 3. Efficiency = 2.5 ÷ 3 = 83.3%. The ideal effort would have been 450 ÷ 3 = 150 N, so 30 N extra goes to overcoming friction.

Example 4: how much effort for a given efficiency. A block and tackle with n = 5 has an efficiency of 80%. To lift 1000 N: MA = 0.8 × 5 = 4, so the effort = 1000 ÷ 4 = 250 N. To raise the load 2 m the effort moves 5 × 2 = 10 m, and the work put in is 250 × 10 = 2500 J, against 2000 J of useful work.

Strands n = VR. Ideal effort = (load + movable weight) ÷ n. Efficiency = load ÷ (n × effort).

— Rule to remember

Key takeaways

  • Count only the strands acting on the movable block.
  • Weight of the movable pulleys adds to the load to be carried.
  • Rope moves n times as fast and as far as the load.
  • Real efficiency is always below 100%.

Check your understanding

  1. 1. A pulley system with 6 supporting strands lifts a 1200 N load. The ideal effort is:

    1. 100 N
    2. 200 N
    3. 600 N
    4. 7200 N
    Show answer

    Answer: B. Effort = load ÷ n = 1200 ÷ 6 = 200 N.

  2. 2. To lift a load by 3 m with a system of 4 strands, the effort end must move:

    1. 0.75 m
    2. 3 m
    3. 7 m
    4. 12 m
    Show answer

    Answer: D. Distance = n × 3 = 12 m.

  3. 3. A system has 2 strands and a movable pulley of weight 20 N. The load is 180 N. Ignoring friction, the effort is:

    1. 100 N
    2. 90 N
    3. 110 N
    4. 200 N
    Show answer

    Answer: A. Effort = (180 + 20) ÷ 2 = 100 N.

  4. 4. A system of 5 strands needs an effort of 250 N to lift 1000 N. Its efficiency is:

    1. 50%
    2. 60%
    3. 90%
    4. 80%
    Show answer

    Answer: D. MA = 1000 ÷ 250 = 4. VR = 5. Efficiency = 4 ÷ 5 = 80%.

  5. 5. In a pulley system the rope speed is 0.6 m/s and there are 3 supporting strands. The load rises at:

    1. 0.2 m/s
    2. 1.8 m/s
    3. 0.6 m/s
    4. 0.3 m/s
    Show answer

    Answer: A. Load speed = rope speed ÷ n = 0.6 ÷ 3 = 0.2 m/s.

Privacy · Terms · Refunds · Delivery