- Foundation
- About 14 min
- 5 practice questions
Levers in more detail: several weights, a uniform rod and the forearm
Balance a rod carrying several weights, include the rod's own weight at its centre, and identify the class of a lever from where its fulcrum, load and effort lie.
If something looks wrong, please tell us.
The lever in the science lab is often a metre rule balanced on a wedge, with weights hung from it. That is a little more complicated than a single load and effort, but the same rule applies: the total clockwise moment about the fulcrum equals the total anticlockwise moment. Take g = 10 m/s².
The rule with many forces
A moment is force × perpendicular distance from the fulcrum. When several forces act, add up all the moments that try to turn the rod clockwise, and all those that try to turn it anticlockwise. The rod is balanced when the two totals are equal. If the rod is uniform (the same thickness all along), its own weight acts at its centre, which for a metre rule is the 50 cm mark. If the fulcrum is at the centre, the rod's weight causes no turning effect, but if the fulcrum is anywhere else, its weight must be included.
Classifying levers
| Class | Which point is in the middle | Examples |
|---|---|---|
| First | Fulcrum | See-saw, crowbar, scissors, pliers |
| Second | Load | Wheelbarrow, nutcracker, bottle opener |
| Third | Effort | Tongs, fishing rod, the human forearm |
In the human forearm, the elbow is the fulcrum, the weight in the hand is the load and the muscle pulls close to the elbow. The effort arm is short and the load arm is long, so the MA is less than 1 and the muscle needs a force greater than the weight held. We gain speed and a large range of movement in return.
Worked examples
Example 1: two weights on one side. A metre rule is balanced at its 50 cm mark. A 100 g mass hangs at the 20 cm mark (30 cm from the fulcrum) and a 50 g mass at the 10 cm mark (40 cm from the fulcrum). Anticlockwise total: 100 × 30 + 50 × 40 = 3000 + 2000 = 5000 g cm. A 125 g mass hung on the other side must be at d with 125 × d = 5000, so d = 40 cm, i.e., at the 90 cm mark.
Example 2: rod's weight included. A uniform metre rule of mass 100 g (weight 1 N) is pivoted at its 30 cm mark. Its weight acts at 50 cm, which is 20 cm from the pivot. Moment of the rule = 1 × 20 = 20 N cm. To balance it, a weight W is hung at the 0 cm mark, 30 cm on the other side: W × 30 = 20, so W = 0.667 N, which is a mass of about 67 g.
Example 3: a plank and a child. A uniform plank 4 m long and weighing 200 N rests on a support at its centre. A child of weight 300 N sits 1.5 m from the centre. Where must a 450 N adult sit on the other side? 300 × 1.5 = 450 × d, so d = 1 m. The plank's weight is at the support, so it adds no moment.
Example 4: the forearm. A weight of 20 N is held in the hand, 30 cm from the elbow, while the muscle acts 3 cm from the elbow. Taking moments about the elbow: E × 3 = 20 × 30, so E = 200 N. The muscle force is ten times the load, which shows that MA = 3 ÷ 30 = 0.1.
Total clockwise moment = total anticlockwise moment. A uniform rod's weight acts at its centre.
Key takeaways
- Add all moments on each side of the fulcrum.
- A uniform rod's weight acts at its midpoint.
- Measure every distance from the fulcrum, along the rod, perpendicular to the force.
- Classify a lever by the point that lies between the other two.
Check your understanding
-
1. A metre rule balanced at 50 cm has a 60 g mass at the 20 cm mark. A 90 g mass must be hung at the:
- 80 cm mark
- 70 cm mark
- 30 cm mark
- 60 cm mark
Show answer
Answer: B. 60 × 30 = 90 × d, so d = 20 cm from the fulcrum. That is the 50 + 20 = 70 cm mark.
-
2. A pair of tongs is a lever of the:
- First class
- Second class
- Third class
- Fourth class
Show answer
Answer: C. In tongs the effort (your fingers) is in the middle, between the pivot and the load. That is a third-class lever.
-
3. A uniform plank is supported at its centre. Its own weight:
- Gives a clockwise moment
- Gives an anticlockwise moment
- Gives a moment equal to its weight
- Gives no moment about the support
Show answer
Answer: D. The weight acts at the centre, directly above the support, so its distance from the support is zero and it has no turning effect.
-
4. A 30 N load is 0.4 m from a fulcrum. The effort acts 1.2 m from the fulcrum on the other side. The effort needed is:
- 10 N
- 90 N
- 25 N
- 3.6 N
Show answer
Answer: A. E × 1.2 = 30 × 0.4 = 12, so E = 10 N.
-
5. The mechanical advantage of the human forearm holding a weight is:
- Greater than 1
- Equal to 1
- Less than 1
- Exactly 2
Show answer
Answer: C. The effort arm (muscle to elbow) is much shorter than the load arm (hand to elbow), so MA = effort arm ÷ load arm is less than 1.
Sign in to keep track of the lessons you finish.