• Foundation
  • About 13 min
  • 5 practice questions

Pulleys

Compare fixed, movable and combined pulley systems and find their velocity ratio and mechanical advantage.

If something looks wrong, please tell us.

Water is drawn from a well using a pulley, and cranes lift heavy loads with many pulleys. A pulley is a wheel with a groove over which a rope runs.

Kinds of pulleys

  • Fixed pulley: fixed to a support. It changes only the direction of the force, so pulling down lifts the load up. MA = 1 (ideal).
  • Movable pulley: moves with the load. The load is shared by two rope sections, so the ideal MA = 2, and the effort moves twice as far as the load.
  • Block and tackle (combined system): several pulleys together. The ideal velocity ratio equals the number of rope sections supporting the movable block.

For an ideal system, MA = VR = number of supporting rope strands. In a real system, friction and the weight of the movable pulley reduce the MA below the VR.

Worked examples

Example 1. A single movable pulley (ideal) lifts a load of 80 N. The effort = 80 ÷ 2 = 40 N.

Example 2. A block and tackle has 4 supporting strands. VR = 4. To raise the load by 1 m, the rope must be pulled 4 m. If the load is 400 N and the actual effort needed is 125 N, MA = 400 ÷ 125 = 3.2. Efficiency = 3.2 ÷ 4 × 100 = 80%.

Example 3. Using a fixed pulley to lift a 50 N bucket requires an effort of 50 N (ideal), but pulling down is more convenient than pulling up, since we can use our body weight.

Example 4. In a system with VR = 3, to lift a load by 2 m the effort end moves 3 × 2 = 6 m.

Ideal MA = VR = number of strands supporting the load. Fixed pulley changes direction only.

— Remember

Key takeaways

  • A fixed pulley changes the direction of force; a movable pulley halves the effort (ideal).
  • VR = number of supporting strands.
  • Real systems are less than 100% efficient.

Check your understanding

  1. 1. What is the ideal mechanical advantage of a single fixed pulley?

    1. 2
    2. 1
    3. 0
    4. 0.5
    Show answer

    Answer: B. A fixed pulley only changes the direction of the force, so the ideal effort equals the load and MA = 1.

  2. 2. A single movable pulley (ideal) is used to lift a load of 80 N. What effort is needed?

    1. 80 N
    2. 160 N
    3. 20 N
    4. 40 N
    Show answer

    Answer: D. The load is shared by two rope sections, so the ideal MA is 2 and effort = 80 ÷ 2 = 40 N.

  3. 3. A pulley system has 5 supporting strands. How far must the rope be pulled to lift the load by 2 m?

    1. 2.5 m
    2. 7 m
    3. 0.4 m
    4. 10 m
    Show answer

    Answer: D. VR = number of supporting strands = 5. Effort distance = 5 × 2 m = 10 m.

  4. 4. A block and tackle with 4 supporting strands lifts a 400 N load with an actual effort of 125 N. What is its efficiency?

    1. 31.25%
    2. 80%
    3. 3.2%
    4. 100%
    Show answer

    Answer: B. MA = 400 ÷ 125 = 3.2. VR = 4. Efficiency = 3.2 ÷ 4 × 100% = 80%.

  5. 5. Why is the actual MA of a pulley system less than its VR?

    1. The load becomes lighter as it is lifted
    2. The velocity ratio keeps changing as the load rises
    3. Friction and the weight of the movable pulley and rope take up part of the effort
    4. The fixed pulley doubles the effort needed
    Show answer

    Answer: C. In a real system some effort is used against friction and to lift the movable pulley and rope, so MA = load ÷ effort is smaller than the VR.

Privacy · Terms · Refunds · Delivery