- Practice
- About 15 min
- 5 practice questions
Dimensional analysis and its uses
Use the principle of homogeneity to check equations, derive relations between quantities, and convert units, while knowing what the method cannot do.
If something looks wrong, please tell us.
Dimensional analysis is a fast check that saves marks. If an equation is physically right, both sides must have the same dimensions. Exam setters use this to ask which formula is correct, to derive a formula, or to find the dimensions of an unknown constant.
The principle of homogeneity
Only quantities with the same dimensions can be added, subtracted or equated. So every term in a correct equation has the same dimensions. Pure numbers (such as 2, ½, π) and trigonometric ratios have no dimensions.
Three uses
- Checking an equation for consistency.
- Deriving a relation between quantities when you know what it depends on.
- Converting a quantity from one system of units to another.
Worked examples
Example 1 (checking). Is v = u + at dimensionally correct? Working: [v] = [L T⁻¹], [u] = [L T⁻¹], and [at] = [L T⁻²][T] = [L T⁻¹]. Every term matches, so the equation is dimensionally consistent.
Example 2 (checking). Check s = ut + ½at². Working: [s] = [L]; [ut] = [L T⁻¹][T] = [L]; [½at²] = [L T⁻²][T²] = [L]. Consistent. Now test s = ut + at: the last term would be [L T⁻¹], not [L], so that version is wrong.
Example 3 (deriving). The time period T of a simple pendulum may depend on its length l, mass m and g. Assume T = k l^a g^b m^c. Dimensions: [T] = [L]^a [L T⁻²]^b [M]^c. Compare powers. Mass: c = 0. Length: a + b = 0. Time: −2b = 1, so b = −½ and a = ½. Hence T = k √(l/g). Dimensional analysis cannot give k; experiment and theory give k = 2π.
Limitations
- It cannot find dimensionless constants such as ½ or 2π.
- It cannot derive relations that involve sums of terms, such as s = ut + ½at²; it can only check them. It also fails when a quantity depends on more than three others.
- It cannot decide between equations that have the same dimensions, for example KE = ½mv² and mv².
A dimensionally correct equation need not be physically correct, but a dimensionally wrong equation is certainly wrong.
Key takeaways
- Compare dimensions on both sides term by term.
- To derive, equate powers of M, L and T on both sides.
- The method misses numerical constants and cannot choose between equations with equal dimensions.
Check your understanding
-
1. Here s is a distance, u and v are speeds, a is an acceleration and t is a time. Which equation is dimensionally WRONG?
- v = u + at
- v² = u² + 2as
- s = ut + ½at²
- s = ut + at
Show answer
Answer: D. In s = ut + at, the term at is [L T⁻²][T] = [L T⁻¹], not [L], so the terms do not match. The other three equations have every term with the same dimensions.
-
2. Using E = hν, which quantity has the same dimensions as Planck's constant h?
- Angular momentum
- Linear momentum
- Energy
- Power
Show answer
Answer: A. h = E/ν = [M L² T⁻²] ÷ [T⁻¹] = [M L² T⁻¹], the dimensions of angular momentum (m v r).
-
3. The time period of a pendulum is written T = k l^a g^b, where l is a length and g the acceleration due to gravity. What are a and b?
- a = −½, b = ½
- a = 1, b = −1
- a = ½, b = −½
- a = ½, b = ½
Show answer
Answer: C. [T] = [L]^a [L T⁻²]^b. Time: −2b = 1, so b = −½. Length: a + b = 0, so a = ½. Hence T = k √(l/g).
-
4. Which is a limitation of dimensional analysis?
- It cannot check whether an equation is consistent
- It cannot be used to convert a quantity between unit systems
- It works only for equations that contain no constants
- It cannot find a dimensionless constant such as 2π
Show answer
Answer: D. Dimensional analysis can check equations, derive relations and convert units, but pure numbers such as ½ or 2π have no dimensions, so it can never find them.
-
5. A drag force on a body is F = kv, where v is its speed. What are the dimensions of k?
- [M L T⁻¹]
- [M L² T⁻¹]
- [M T⁻¹]
- [M T⁻²]
Show answer
Answer: C. k = F/v = [M L T⁻²] ÷ [L T⁻¹] = [M T⁻¹].
Sign in to keep track of the lessons you finish.