• Practice
  • About 14 min
  • 5 practice questions

Unit conversion problem set: speed, density, area and pressure

Practise converting speeds, densities, areas, volumes and pressures between SI and CGS units quickly, and avoid the squared-factor traps.

If something looks wrong, please tell us.

Conversion questions are among the quickest marks in a physics paper, and also among the easiest to lose. A slip in a power of ten or a forgotten square turns a correct method into a wrong answer. This lesson gives a short routine, a set of standard factors to memorise, and worked examples for each question type, followed by the traps that examiners like to set.

The routine

  1. Write the quantity with its unit.
  2. Write each old unit in terms of the new unit (for example 1 km = 1000 m).
  3. Substitute, and raise the factor to the same power as the unit (a square unit needs a squared factor).
  4. Simplify, and check that the size is sensible: a bigger unit gives a smaller number.
Factors to memorise
ConversionFactor
km/h to m/smultiply by 5/18 (divide by 3.6)
m/s to km/hmultiply by 18/5 (multiply by 3.6)
m² to cm²1 m² = 10⁴ cm²
m³ to cm³1 m³ = 10⁶ cm³
litre1 L = 1000 cm³ = 10⁻³ m³
density1 g/cm³ = 1000 kg/m³
pressure1 Pa = 10 dyne/cm²

Worked examples

Example 1 (speed). Convert 90 km/h to m/s. Divide by 3.6: 90 ÷ 3.6 = 25 m/s. Check by the 5/18 rule: 90 × 5 ÷ 18 = 450 ÷ 18 = 25 m/s.

Example 2 (density). A metal has density 7.8 g/cm³ (an illustrative value). In SI: 7.8 × 1000 = 7800 kg/m³. Working: 7.8 g = 7.8 × 10⁻³ kg and 1 cm³ = 10⁻⁶ m³, so the density is 7.8 × 10⁻³ ÷ 10⁻⁶ = 7.8 × 10³ kg/m³.

Example 3 (area). A sheet has area 2500 cm². In m²: 1 cm² = (10⁻² m)² = 10⁻⁴ m², so 2500 × 10⁻⁴ = 0.25 m². Dividing by 100 instead of 10 000 would give 25 m², an impossible size for a sheet that is about 50 cm square.

Example 4 (volume). A tank holds 5 litres. In m³: 5 × 10⁻³ m³. In cm³: 5 × 1000 = 5000 cm³.

Example 5 (pressure to CGS). A pressure of 2 × 10⁵ Pa is converted by 1 Pa = 10 dyne/cm²: 2 × 10⁵ × 10 = 2 × 10⁶ dyne/cm². Working: 1 N/m² = 10⁵ dyne ÷ 10⁴ cm² = 10 dyne/cm².

Example 6 (acceleration with a squared time). Express g = 10 m/s² in km/h². 1 m = 10⁻³ km and 1 s = 1/3600 h, so 1 s² = (1/3600)² h². Then 10 m/s² = 10 × 10⁻³ km ÷ (1/3600)² h² = 10 × 10⁻³ × 3600² = 10 × 10⁻³ × 12 960 000 = 129 600 km/h².

Example 7 (a new unit of speed). Convert 20 m/s into km per minute. 20 m = 0.02 km and 1 s = 1/60 minute, so the speed is 0.02 ÷ (1/60) = 0.02 × 60 = 1.2 km/min.

Common traps

  • Using 100 instead of 10⁴ for cm² in a m², or 100 instead of 10⁶ for cm³ in a m³.
  • Multiplying by 18/5 when you should divide, so a speed in m/s comes out larger than the same speed in km/h.
  • Forgetting that g and kg differ by 1000 when converting density.
  • Squaring the time factor the wrong way round in units like m/s².

A quantity with unit u^n needs the conversion factor raised to the power n. Bigger unit, smaller number.

— Rule to remember

Key takeaways

  • Memorise the factors in the table; they cover most exam questions.
  • Raise the factor to the power in the unit: cm² needs a squared factor, cm³ a cubed one.
  • Always check whether the new number should be larger or smaller than the old one.

Check your understanding

  1. 1. A train moves at 108 km/h. Its speed in m/s is:

    1. 3 m/s
    2. 388.8 m/s
    3. 300 m/s
    4. 30 m/s
    Show answer

    Answer: D. Divide by 3.6: 108 ÷ 3.6 = 30 m/s. Check with 5/18: 108 × 5 ÷ 18 = 30.

  2. 2. A cyclist rides at 12 m/s. This is the same as:

    1. 43.2 km/h
    2. 3.33 km/h
    3. 12 km/h
    4. 120 km/h
    Show answer

    Answer: A. Multiply by 3.6 to go from m/s to km/h: 12 × 3.6 = 43.2 km/h.

  3. 3. An area of 3 m² equals:

    1. 3 × 10² cm²
    2. 3 × 10⁶ cm²
    3. 3 × 10⁴ cm²
    4. 3 × 10³ cm²
    Show answer

    Answer: C. 1 m² = (100 cm)² = 10⁴ cm², so 3 m² = 3 × 10⁴ cm².

  4. 4. A liquid has density 0.9 g/cm³. In SI units this is:

    1. 0.9 kg/m³
    2. 90 kg/m³
    3. 9000 kg/m³
    4. 900 kg/m³
    Show answer

    Answer: D. 1 g/cm³ = 1000 kg/m³, so 0.9 g/cm³ = 900 kg/m³.

  5. 5. A speed of 20 m/s expressed in km per minute is:

    1. 0.33 km/min
    2. 1.2 km/min
    3. 12 km/min
    4. 72 km/min
    Show answer

    Answer: B. 20 m/s = 20 × 60 m in a minute = 1200 m/min = 1.2 km/min.

Privacy · Terms · Refunds · Delivery