• Practice
  • 15 practice questions

Final self-assessment: Units and measurement practice

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions on units and measurement practice first, then check your answers and read each explanation. The questions follow the lessons in order - questions 1-3: lesson 1 (SI units, conversions and dimensions); questions 4-6: lesson 2 (Dimensional analysis and its uses); questions 7-9: lesson 3 (Significant figures and rounding); questions 10-12: lesson 4 (Errors in measurement); questions 13-15: lesson 5 (Vernier calipers and screw gauge). Revisit a lesson for any question you missed.

Final self-assessment

  1. 1. From F = G m₁m₂/r², what are the dimensions of the gravitational constant G?

    1. [M L³ T⁻²]
    2. [M⁻¹ L² T⁻²]
    3. [M⁻¹ L³ T⁻²]
    4. [M⁻² L³ T⁻²]
    Show answer

    Answer: C. G = F r² ÷ (m₁ m₂) = [M L T⁻²][L²] ÷ [M²] = [M⁻¹ L³ T⁻²].

  2. 2. A car moves steadily at 25 m/s. How far does it travel in 2 minutes?

    1. 1.5 km
    2. 3 km
    3. 50 km
    4. 0.83 km
    Show answer

    Answer: B. 2 minutes = 120 s. Distance = 25 × 120 = 3000 m = 3 km. (25 m/s is 90 km/h, and 90 km/h for 1/30 h is also 3 km.)

  3. 3. How many joules are there in 0.5 kWh?

    1. 1.8 × 10⁶ J
    2. 1.8 × 10³ J
    3. 3.6 × 10⁶ J
    4. 7.2 × 10⁵ J
    Show answer

    Answer: A. 1 kWh = 3.6 × 10⁶ J, so 0.5 kWh = 0.5 × 3.6 × 10⁶ = 1.8 × 10⁶ J.

  4. 4. The frequency of a stretched string is f = k T^a l^b μ^c, where T is the tension (a force), l the length and μ the mass per unit length. What are a, b and c?

    1. a = ½, b = −1, c = −½
    2. a = ½, b = 1, c = −½
    3. a = −½, b = −1, c = ½
    4. a = 1, b = −1, c = −1
    Show answer

    Answer: A. [T⁻¹] = [M L T⁻²]^a [L]^b [M L⁻¹]^c. Time: −2a = −1, so a = ½. Mass: a + c = 0, so c = −½. Length: a + b − c = 0, so ½ + b + ½ = 0 and b = −1.

  5. 5. Which pair of equations can dimensional analysis NOT tell apart?

    1. v = u + at and v = u + at²
    2. KE = ½mv² and KE = mv²
    3. s = ut + ½at² and s = ut + ½at
    4. P = F/A and P = F × A
    Show answer

    Answer: B. ½mv² and mv² have the same dimensions [M L² T⁻²]; they differ only by a pure number, which dimensional analysis cannot see. In each other pair one equation is dimensionally wrong.

  6. 6. The speed v of waves on deep water depends on the wavelength λ and on g. If v = k λ^a g^b, what are a and b?

    1. a = 1, b = −½
    2. a = −½, b = ½
    3. a = ½, b = ½
    4. a = ½, b = −½
    Show answer

    Answer: C. [L T⁻¹] = [L]^a [L T⁻²]^b. Time: −2b = −1, so b = ½. Length: a + b = 1, so a = ½. Hence v = k √(gλ).

  7. 7. A plate measures 6.25 cm by 2.1 cm. What is its area to the correct number of significant figures?

    1. 13.1 cm²
    2. 13.13 cm²
    3. 13.125 cm²
    4. 13 cm²
    Show answer

    Answer: D. 6.25 × 2.1 = 13.125. The factor 2.1 has 2 significant figures, so the area is 13 cm².

  8. 8. Subtract 4.2 from 25.37 and give the answer with the correct precision.

    1. 21.17
    2. 21
    3. 21.2
    4. 21.170
    Show answer

    Answer: C. 25.37 − 4.2 = 21.17. In subtraction keep the fewest decimal places, one (from 4.2), so the answer is 21.2.

  9. 9. Which way of writing 4500 shows clearly that it has exactly 3 significant figures?

    1. 4.50 × 10³
    2. 4.5 × 10³
    3. 4.500 × 10³
    4. 0.45 × 10⁴
    Show answer

    Answer: A. 4.50 × 10³ has 3 significant figures. 4.5 × 10³ and 0.45 × 10⁴ have 2, and 4.500 × 10³ has 4.

  10. 10. g is found from g = 4π²l/T². The length l has a 2% error and the time period T a 1% error. What is the maximum percentage error in g?

    1. 3%
    2. 1%
    3. 6%
    4. 4%
    Show answer

    Answer: D. 4π² has no error. Error in g = error in l + 2 × error in T = 2% + 2 × 1% = 4%.

  11. 11. Pressure P = F/A is found on a square plate. The force has a 2% error and the side of the square a 1% error. What is the maximum percentage error in P?

    1. 3%
    2. 4%
    3. 1%
    4. 2%
    Show answer

    Answer: B. Area = side², so its error is 2 × 1% = 2%. For a quotient the percentage errors add: 2% + 2% = 4%.

  12. 12. A length is measured five times: 5.2, 5.4, 5.0, 5.2 and 5.2 cm. What is the mean absolute error?

    1. 0.4 cm
    2. 0.08 cm
    3. 0.2 cm
    4. 0.1 cm
    Show answer

    Answer: B. Mean = 26.0 ÷ 5 = 5.2 cm. Absolute errors: 0, 0.2, 0.2, 0, 0, total 0.4. Mean absolute error = 0.4 ÷ 5 = 0.08 cm.

  13. 13. A screw gauge has pitch 0.5 mm and 50 circular divisions, and a zero error of +0.02 mm. A wire gives a linear reading of 3.5 mm and a circular reading of 12. What is the true diameter?

    1. 3.64 mm
    2. 3.62 mm
    3. 3.56 mm
    4. 3.60 mm
    Show answer

    Answer: D. Least count = 0.5 ÷ 50 = 0.01 mm. Observed = 3.5 + 12 × 0.01 = 3.62 mm. True = 3.62 − 0.02 = 3.60 mm.

  14. 14. In a vernier caliper, 1 main scale division is 0.5 mm and 25 vernier divisions equal 24 main scale divisions. What is the least count?

    1. 0.02 mm
    2. 0.05 mm
    3. 0.5 mm
    4. 0.01 mm
    Show answer

    Answer: A. Least count = 1 MSD ÷ number of vernier divisions = 0.5 mm ÷ 25 = 0.02 mm. Check: 1 VSD = 24 × 0.5 ÷ 25 = 0.48 mm, and 0.5 − 0.48 = 0.02 mm.

  15. 15. A vernier caliper with a zero error of −0.03 cm reads 4.47 cm for a rod. What is the true length?

    1. 4.44 cm
    2. 4.47 cm
    3. 4.50 cm
    4. 4.53 cm
    Show answer

    Answer: C. Corrected reading = observed − zero error = 4.47 − (−0.03) = 4.50 cm.

Privacy · Terms · Refunds · Delivery