- Practice
- About 16 min
- 5 practice questions
Electrical energy, domestic circuits, safety and LEDs
Calculate electrical energy in kilowatt hours, describe a domestic circuit with its meter, fuse or MCB, 5 A and 15 A circuits and earthing, explain overloading and short circuits, and give the merits of LED bulbs and LED television.
If something looks wrong, please tell us.
By the end of this lesson you can
- Calculate electrical energy in Wh, kWh and joules.
- Describe the main parts of a domestic electric circuit.
- Explain overloading, short circuit and earthing.
- Describe LED bulbs, seven segment displays and LED television.
The electricity bill counts 'units'. This lesson shows what a unit is, how electricity reaches each room of a house safely, and why LED lights save energy.
Electrical energy and the kilowatt hour
Energy consumed depends on the power of an appliance and the time it is used: energy = power × time. A 100 W bulb used for 2 hours uses 100 × 2 = 200 watt hour (Wh). The SI unit of energy is the watt second (joule), but in practice the kilowatt hour (kWh) is used. One kWh, called one unit, is the energy used when 1000 W is used for 1 hour.
1 kWh = 1000 W × 3600 s = 3.6 × 10⁶ J = 1 unit of electrical energy.
Worked example 1: a month's use of a heater
Question: A 1500 W room heater is used for 2 hours a day for 30 days. Find the energy used. If one unit cost ₹6 (a made-up rate for practice), what would it cost?
Working: power = 1.5 kW. Energy = 1.5 kW × 2 h × 30 = 90 kWh (90 units). Cost = 90 × 6 = ₹540.
Worked example 2: units to joules
Question: Express 0.5 kWh in joules.
Working: 0.5 × 3.6 × 10⁶ = 1.8 × 10⁶ J.
The domestic electric circuit
Electricity from power stations reaches consumers through overhead and underground cables. From a distribution point such as a transformer, the supply comes to the house's main box, which holds the meter (records energy used) and the fuse box (a fuse wire or a miniature circuit breaker, MCB). An MCB is a switch that can be operated by hand and also trips automatically: when excess current flows, an electromagnet pulls a spring-loaded switch and breaks the circuit.
From the street to the appliance
- Supply from the distribution panel
- Main fuse on the live wire
- Electricity meter
- Main switch
- Separate parallel circuits 5 A circuit and 15 A circuit
- Two insulated wires bring the supply. In the colour code given in the Tamil Nadu textbook, the live wire has red insulation and the neutral wire black. (Newer wiring often uses other colours, so never judge a wire by colour alone.)
- In India the domestic supply is alternating current at 220/230 V and 50 Hz.
- The 5 A circuit runs low-power appliances: tube lights, bulbs, fans. The 15 A circuit runs high-power appliances: air-conditioners, refrigerators, irons and heaters.
- All the circuits are in parallel, so each appliance gets the same voltage and one circuit can be switched off without affecting the others.
Worked example 3: which circuit?
Question: A 2000 W heater runs on 220 V. Which circuit should it use?
Working: I = P/V = 2000 ÷ 220 ≈ 9.1 A. This is more than 5 A but less than 15 A, so it belongs on the 15 A circuit.
Overloading, short circuit and earthing
- Overloading: too many appliances drawing current from the same supply point at once (they are connected in parallel, so their currents add up). When the current goes past the safe limit, the wires overheat and may cause a fire.
- Short circuit: the live wire touches the neutral wire, usually because of damaged insulation. The resistance of the path becomes very small, a very large current flows, and the wires can overheat and start a fire.
- In both cases the fuse or MCB breaks the circuit.
- Earthing: a third wire, the earth wire (green insulation), joins the metal body of an appliance to a metal plate or pipe buried in the ground. If the live wire touches the metal body, the current flows safely to the earth along this low-resistance path instead of through a person, protecting us from electric shock.
Safety note: never open a switchboard, plug or appliance that is connected to the mains. Mains voltage can kill; repairs are for a qualified electrician.
LED bulbs and LED television
An LED (light emitting diode) is a semiconductor device that gives out visible light when current passes through it. The colour depends on the material; compounds such as gallium arsenide and gallium phosphide give red, green, yellow and orange LEDs. LEDs are used in digital watch and calculator displays, traffic signals, street lights and decorative lights.
A seven segment display shows numbers (and some letters) using seven LED segments arranged as the figure 8, named a, b, c, d, e, f and g, with an eighth LED for the decimal point. Digital meters, clocks and microwave ovens use it.
- Merits of an LED bulb: no filament, so much less energy is wasted as heat and it stays cooler than a filament bulb; much lower power than a fluorescent lamp; many colours possible; energy and cost efficient; needs no mercury or other toxic materials.
- LED television: an LCD television lit by LEDs, with arrays of LEDs acting as pixels (white LEDs for black-and-white, red, green and blue LEDs for colour). Its advantages: brighter picture, thinner set, less power, longer life and greater reliability.
Key takeaways: energy = power × time, and 1 unit = 1 kWh = 3.6 × 10⁶ J. Houses use parallel circuits with a fuse or MCB and an earth wire for safety. LEDs give the same light for far less energy.
Check your understanding
-
1. One kilowatt hour is equal to
- 1000 J
- 3.6 × 10⁶ J
- 3600 J
- 3.6 × 10³ kJ per second
Show answer
Answer: B. 1 kWh = 1000 W × 3600 s = 3 600 000 J = 3.6 × 10⁶ J.
-
2. A 200 W television is used for 5 hours. The energy used is
- 40 kWh
- 0.1 kWh
- 1000 kWh
- 1 kWh
Show answer
Answer: D. Energy = 0.2 kW × 5 h = 1 kWh, which is 1 unit.
-
3. The earth wire in a domestic circuit
- carries leakage current from a metal body safely to the ground, preventing shocks
- supplies extra power to heavy appliances
- replaces the neutral wire
- measures the energy used
Show answer
Answer: A. The earth wire gives a low-resistance path from the appliance's metal body to the ground, so a fault current does not pass through a person who touches it.
-
4. During a short circuit
- the resistance becomes very large and no current flows
- the voltage of the supply doubles
- the resistance becomes very small and a very large current flows
- the fuse makes the current larger
Show answer
Answer: C. When the live wire touches the neutral wire, the path has almost no resistance, so a huge current flows and heats the wires. The fuse or MCB then breaks the circuit.
-
5. A seven segment display uses
- seven filament bulbs
- seven LEDs arranged as the figure 8, plus one for the decimal point
- seven fuses
- one LED that changes shape
Show answer
Answer: B. Seven LED segments (a to g) arranged as an 8 can show any digit, and an eighth LED shows the dot.
Sign in to keep track of the lessons you finish.