• Practice
  • About 15 min
  • 5 practice questions

Ohm's law, resistance, resistivity and conductivity

State Ohm's law and use V = IR, define resistance and the ohm, use R = ρL/A to find resistivity, and calculate conductance and conductivity in mho and mho per metre.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State Ohm's law and use V = IR.
  • Define resistance and the ohm.
  • Explain how length, area and material affect resistance, and use R = ρL/A.
  • Calculate conductance G = 1/R and conductivity σ = 1/ρ.

The same battery drives a big current through a thick copper wire but only a small one through a thin nichrome wire. Each conductor opposes the flow of charge by a different amount. Ohm's law puts a number on that opposition.

Ohm's law

The German physicist Georg Simon Ohm found the link between current and potential difference. Ohm's law: at a constant temperature, the steady current I through a conductor is directly proportional to the potential difference V between its ends. So V/I is a constant, called the resistance R: V = IR. A graph of V against I for such a conductor is a straight line through the origin.

To check it in the laboratory, a nichrome wire is joined in series with a battery, an ammeter and a rheostat, with a voltmeter across the wire. Changing the rheostat gives several pairs of V and I readings, and V/I comes out the same each time.

Resistance

Resistance is the property of a material that opposes the flow of charge, and so the passage of current. It is the ratio of the potential difference across a conductor to the current through it: R = V/I. Its SI unit is the ohm (Ω). A conductor has a resistance of 1 ohm if a current of 1 A flows when a potential difference of 1 V is kept across its ends: 1 Ω = 1 V/1 A.

Worked example 1: using V = IR

Question: (a) A 12 V battery drives 0.4 A through a resistor. Find R. (b) What current flows if the same resistor is connected to 6 V?

Working: (a) R = V/I = 12 ÷ 0.4 = 30 Ω. (b) I = V/R = 6 ÷ 30 = 0.2 A. Halving V halves I, as Ohm's law says.

Resistivity

Experiments show that the resistance of a conductor is directly proportional to its length L and inversely proportional to its area of cross-section A: R = ρL/A. The constant ρ (rho) is the electrical resistivity (specific resistance) of the material. Rearranging, ρ = RA/L, so resistivity is the resistance of a conductor of unit length and unit area of cross-section. Its unit is the ohm metre (Ω m). Resistivity depends only on the material (at a given temperature), not on the size of the wire.

Resistivity of some materials (values as given in the Tamil Nadu textbook)
NatureMaterialResistivity (Ω m)
ConductorCopper1.62 × 10⁻⁸
ConductorNickel6.84 × 10⁻⁸
ConductorChromium12.9 × 10⁻⁸
InsulatorGlass10¹⁰ to 10¹⁴
InsulatorRubber10¹³ to 10¹⁶

Nichrome has a high resistivity for a conductor (the textbook gives 1.5 × 10⁻⁶ Ω m), which is why it is used for heating elements.

Worked example 2: resistance of a copper wire

Question: Find the resistance of a copper wire 50 m long with area of cross-section 1 × 10⁻⁶ m² (1 mm²). Use ρ = 1.62 × 10⁻⁸ Ω m.

Working: R = ρL/A = (1.62 × 10⁻⁸ × 50) ÷ (1 × 10⁻⁶) = 81 × 10⁻⁸ ÷ 10⁻⁶ = 0.81 Ω. Copper wires have very small resistance, so they make good connecting leads.

Conductance and conductivity

  • Conductance G is the property that helps charge flow: G = 1/R. Unit: ohm⁻¹, also written mho.
  • Conductivity σ is the reciprocal of resistivity: σ = 1/ρ. Unit: ohm⁻¹ m⁻¹, or mho m⁻¹. It measures how well a material passes current.

Good conductors (copper, aluminium) have high conductivity and low resistivity; insulators (glass, wood, rubber) have low conductivity and very high resistivity.

Worked example 3: resistivity, conductance and conductivity

Question: A wire 2 m long with cross-section 5 × 10⁻⁷ m² has resistance 4 Ω. Find its resistivity, conductance and conductivity.

Working: ρ = RA/L = (4 × 5 × 10⁻⁷) ÷ 2 = 1 × 10⁻⁶ Ω m. G = 1/R = 1/4 = 0.25 mho. σ = 1/ρ = 1 ÷ 10⁻⁶ = 10⁶ mho m⁻¹.

Worked example 4: stretching a wire

Question: A wire of resistance 5 Ω is stretched to twice its length. Its volume stays the same. Find the new resistance.

Working: doubling the length with the same volume halves the area. R = ρL/A becomes ρ(2L)/(A/2) = 4ρL/A. New resistance = 4 × 5 = 20 Ω.

What decides a wire's resistance (R = ρL/A)

  • Length L
    • Longer wire: more resistance
  • Area of cross-section A
    • Thicker wire: less resistance
  • Material (resistivity ρ)
    • Copper: low
    • Nichrome: high
    • Rubber, glass: very high

V = IR (1 Ω = 1 V A⁻¹). R = ρL/A, ρ in Ω m. G = 1/R (mho); σ = 1/ρ (mho m⁻¹).

Key takeaways: at constant temperature, current is proportional to potential difference. Resistance grows with length, falls with thickness and depends on the material through ρ. Conductance and conductivity are simply the reciprocals of resistance and resistivity.

Check your understanding

  1. 1. A 9 V battery drives a current of 0.3 A through a resistor. Its resistance is

    1. 2.7 Ω
    2. 30 Ω
    3. 0.033 Ω
    4. 9.3 Ω
    Show answer

    Answer: B. R = V/I = 9 ÷ 0.3 = 30 Ω. Multiplying V by I (2.7) gives power, not resistance.

  2. 2. If a conductor is made thicker, keeping its length and material the same, its resistance

    1. increases
    2. stays the same
    3. becomes infinite
    4. decreases
    Show answer

    Answer: D. R = ρL/A. A larger area of cross-section A gives a smaller resistance.

  3. 3. The conductance of a 5 Ω resistor is

    1. 0.2 mho
    2. 5 mho
    3. 25 mho
    4. 0.5 mho
    Show answer

    Answer: A. G = 1/R = 1/5 = 0.2 mho (ohm⁻¹).

  4. 4. The length of a wire is doubled while its area of cross-section is kept the same. Its resistance

    1. halves
    2. becomes four times
    3. doubles
    4. is unchanged
    Show answer

    Answer: C. R ∝ L when A and ρ are fixed, so doubling L doubles R. (Stretching a wire, which also thins it, would make it four times.)

  5. 5. The SI unit of electrical resistivity is

    1. ohm
    2. ohm metre
    3. mho
    4. ohm per metre
    Show answer

    Answer: B. ρ = RA/L has units Ω × m² ÷ m = Ω m (ohm metre).

Privacy · Terms · Refunds · Delivery