- Practice
- About 17 min
- 5 practice questions
Resistors in series, in parallel and in combinations
Derive and use R_s = R₁ + R₂ + R₃ and 1/R_p = 1/R₁ + 1/R₂ + 1/R₃, find currents and voltages in each resistor, solve series-parallel and parallel-series networks, and compare series and parallel circuits.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive the effective resistance of resistors in series and in parallel.
- Find the current through and voltage across each resistor.
- Solve series-parallel and parallel-series combinations.
- Explain why house wiring uses parallel circuits.
Real circuits rarely have a single resistor. A torch joins its parts one after another; a house connects every light and fan side by side. The way resistors are joined changes the total resistance, and so the current.
Resistors in series
Resistors joined end to end, so that the same current passes through each, are in series. A series circuit has a single loop: break it anywhere and no current flows at all. Torches (flashlights) use series circuits.
- Let R₁, R₂, R₃ carry the same current I. By Ohm's law V₁ = IR₁, V₂ = IR₂, V₃ = IR₃.
- The total potential difference is the sum: V = V₁ + V₂ + V₃ = IR₁ + IR₂ + IR₃.
- An effective resistance R_s would give V = IR_s.
- So IR_s = IR₁ + IR₂ + IR₃, giving R_s = R₁ + R₂ + R₃. For n equal resistors R, R_s = nR.
The effective resistance in series is greater than the largest individual resistance.
Worked example 1: a series circuit
Question: Resistors of 4 Ω, 6 Ω and 10 Ω are joined in series to a 12 V battery. Find the effective resistance, the current and the voltage across each.
Working: R_s = 4 + 6 + 10 = 20 Ω. I = V/R_s = 12 ÷ 20 = 0.6 A. V₁ = 0.6 × 4 = 2.4 V, V₂ = 0.6 × 6 = 3.6 V, V₃ = 0.6 × 10 = 6.0 V. Check: 2.4 + 3.6 + 6.0 = 12 V.
Resistors in parallel
Resistors connected across the same two points A and B are in parallel. Each has the same potential difference V, and the current divides among them. A parallel circuit has two or more loops, so if one is broken current still flows in the others. House wiring is parallel.
- Currents in the branches: I₁ = V/R₁, I₂ = V/R₂, I₃ = V/R₃.
- The total current is the sum: I = I₁ + I₂ + I₃ = V/R₁ + V/R₂ + V/R₃.
- An effective resistance R_p would give I = V/R_p.
- So 1/R_p = 1/R₁ + 1/R₂ + 1/R₃. For n equal resistors R, R_p = R/n.
The effective resistance in parallel is less than the smallest individual resistance.
Worked example 2: a parallel circuit
Question: Resistors of 3 Ω and 6 Ω are connected in parallel across a 6 V battery. Find the effective resistance, each branch current and the total current.
Working: 1/R_p = 1/3 + 1/6 = 2/6 + 1/6 = 3/6 = 1/2, so R_p = 2 Ω. I₁ = 6 ÷ 3 = 2 A, I₂ = 6 ÷ 6 = 1 A. Total I = 2 + 1 = 3 A, and check: V/R_p = 6 ÷ 2 = 3 A. The smaller resistor takes the larger current.
Combinations
- Series-parallel: R₁ and R₂ in parallel (R_p1), R₃ and R₄ in parallel (R_p2), and the two groups in series: R_total = R_p1 + R_p2.
- Parallel-series: R₁ and R₂ in series (R_s1 = R₁ + R₂), R₃ and R₄ in series (R_s2 = R₃ + R₄), and the two branches in parallel: 1/R_total = 1/R_s1 + 1/R_s2.
Worked example 3: both kinds of combination
Question: (a) 6 Ω ∥ 3 Ω, in series with 4 Ω ∥ 4 Ω. (b) (2 Ω + 4 Ω) in parallel with (1 Ω + 2 Ω). Find each total resistance.
Working: (a) 6 ∥ 3: 1/R = 1/6 + 1/3 = 3/6, so R = 2 Ω. 4 ∥ 4 = 4/2 = 2 Ω. Total = 2 + 2 = 4 Ω. (b) Branches are 6 Ω and 3 Ω. 1/R = 1/6 + 1/3 = 1/2, so R = 2 Ω.
Series and parallel circuits
-
Series
- Same current in every resistor
- Voltages add up
- R_s more than the largest resistor
- Smaller total current
- One breaks, all stop
-
Parallel
- Same voltage across every resistor
- Currents add up
- R_p less than the smallest resistor
- Larger total current
- Each works independently
Series: R_s = R₁ + R₂ + R₃ (n equal: nR). Parallel: 1/R_p = 1/R₁ + 1/R₂ + 1/R₃ (n equal: R/n).
Key takeaways: in series, the current is the same everywhere and the voltage is divided; in parallel, voltage is the same and current is divided. Adding resistors in series raises the total resistance; adding them in parallel lowers it.
Check your understanding
-
1. Resistors of 2 Ω, 3 Ω and 5 Ω are connected in series. The effective resistance is
- 10 Ω
- 0.97 Ω
- 30 Ω
- 5 Ω
Show answer
Answer: A. In series, R_s = 2 + 3 + 5 = 10 Ω, which is more than the largest resistor.
-
2. Two 4 Ω resistors are connected in parallel. The effective resistance is
- 8 Ω
- 4 Ω
- 2 Ω
- 16 Ω
Show answer
Answer: C. For n equal resistors in parallel, R_p = R/n = 4/2 = 2 Ω. Check: 1/4 + 1/4 = 1/2.
-
3. Five resistors of 10 Ω each are connected in parallel. The effective resistance is
- 50 Ω
- 10 Ω
- 0.5 Ω
- 2 Ω
Show answer
Answer: D. R_p = R/n = 10/5 = 2 Ω. In series they would give 50 Ω.
-
4. Household appliances are connected in parallel mainly because
- this increases the total resistance
- each appliance gets the same voltage and can be switched on or off independently
- the same current then flows through every appliance
- it uses less wire
Show answer
Answer: B. In parallel every appliance gets the full supply voltage and has its own loop, so switching one off does not affect the others.
-
5. Resistors of 2 Ω, 3 Ω and 6 Ω are in parallel across 6 V. The total current from the battery is
- 0.55 A
- 1 A
- 6 A
- 11 A
Show answer
Answer: C. 1/R_p = 1/2 + 1/3 + 1/6 = 3/6 + 2/6 + 1/6 = 1, so R_p = 1 Ω and I = 6/1 = 6 A. Branch check: 3 + 2 + 1 = 6 A.
Sign in to keep track of the lessons you finish.