- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Gaseous State
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions with pen and paper, writing your working, before you look at any explanation. Use R = 0.0821 dm³ atm mol⁻¹ K⁻¹ unless told otherwise, and always change temperatures to kelvin.
Final self-assessment
-
1. A bubble of volume 1.5 mL at the bottom of a lake (4.0 atm, 6 °C) rises to the surface (1.0 atm, 25 °C). What is its volume at the surface?
- 6.0 mL
- 0.40 mL
- 6.4 mL
- 25 mL
Show answer
Answer: C. Use P₁V₁/T₁ = P₂V₂/T₂ with T₁ = 279 K and T₂ = 298 K. V₂ = 1.5 × (4.0/1.0) × (298/279) = 6.0 × 1.068 = 6.41 mL. 6.0 mL ignores the temperature rise.
-
2. A gas sample has a volume of 3.80 dm³ at an unknown temperature. Cooled to 0 °C at constant pressure, its volume becomes 2.27 dm³. What was its first temperature?
- 457 K
- 163 K
- 273 K
- 184 °C
Show answer
Answer: A. V₁/T₁ = V₂/T₂, so T₁ = T₂ × V₁/V₂ = 273 K × 3.80/2.27 = 273 × 1.674 = 457 K (about 184 °C). Note that 184 °C is not 184 K.
-
3. If both the kelvin temperature and the volume of a fixed amount of ideal gas are doubled, the pressure becomes
- 4P
- 2P
- P/2
- P
Show answer
Answer: D. P = nRT/V. Doubling T doubles the numerator and doubling V doubles the denominator, so P is unchanged.
-
4. What is the density of nitrogen at 227 °C and 5.00 atm? (N = 14, R = 0.082 dm³ atm mol⁻¹ K⁻¹)
- 1.40 g dm⁻³
- 3.41 g dm⁻³
- 6.83 g dm⁻³
- 0.29 g dm⁻³
Show answer
Answer: B. d = PM/RT with T = 500 K and M(N₂) = 28 g mol⁻¹: d = (5.00 × 28) ÷ (0.082 × 500) = 140 ÷ 41 = 3.41 g dm⁻³. Using M = 14 for atomic nitrogen gives half this value.
-
5. 25 g each of HF, HCl, HBr and HI are taken at the same temperature and pressure. Which occupies the smallest volume?
- HF
- HCl
- HBr
- HI
Show answer
Answer: D. At fixed T and P, V ∝ n = m/M. With equal masses, the gas with the largest molar mass has the fewest moles: HI (128 g mol⁻¹), so it has the smallest volume.
-
6. A tank contains 52.5 g of O₂ and 65.1 g of CO₂ at a total pressure of 9.21 atm. What is the partial pressure of oxygen? (O = 16, C = 12)
- 4.37 atm
- 4.61 atm
- 5.26 atm
- 4.84 atm
Show answer
Answer: D. n(O₂) = 52.5 ÷ 32 = 1.641 mol; n(CO₂) = 65.1 ÷ 44 = 1.480 mol; total = 3.121 mol. x(O₂) = 1.641 ÷ 3.121 = 0.526, so p(O₂) = 0.526 × 9.21 = 4.84 atm. Check with the other gas: x(CO₂) = 0.474 and p(CO₂) = 4.37 atm; 4.84 + 4.37 = 9.21 atm. 4.37 atm is the partial pressure of CO₂, not O₂.
-
7. Hydrogen diffuses 3√3 times as fast as a hydrocarbon CₙH₂ₙ₋₂ under the same conditions. What is n? (C = 12, H = 1)
- 3
- 4
- 8
- 1
Show answer
Answer: B. r(H₂)/r(X) = √(M(X)/2) = 3√3, so M(X)/2 = 27 and M(X) = 54 g mol⁻¹. For CₙH₂ₙ₋₂: 12n + 2n − 2 = 54, so 14n = 56 and n = 4 (C₄H₆).
-
8. Equal moles of H₂ and O₂ are placed in a container with a pinhole. What fraction of the oxygen escapes in the time it takes half the hydrogen to escape?
- 1/8
- 1/2
- 1/4
- 3/8
Show answer
Answer: A. r(O₂)/r(H₂) = √(2/32) = 1/4. In the same time oxygen escapes at a quarter of hydrogen's rate. Half the hydrogen escapes, so 1/2 × 1/4 = 1/8 of the oxygen escapes.
-
9. When NH₃ and HCl diffuse towards each other from opposite ends of a long tube, where does the white ring of NH₄Cl first form?
- At the centre of the tube
- Nearer the HCl end
- Nearer the NH₃ end
- Along the whole tube at once
Show answer
Answer: B. NH₃ (17 g mol⁻¹) is lighter than HCl (36.5 g mol⁻¹), so it diffuses faster and travels further before the two gases meet. The ring forms closer to the HCl end.
-
10. The van der Waals constant a values (dm⁶ atm mol⁻²) are O₂ 1.360, N₂ 1.390, NH₃ 4.170 and CH₄ 2.253. Which gas is the most easily liquefied?
- NH₃
- O₂
- N₂
- CH₄
Show answer
Answer: A. The constant a measures the attraction between molecules. NH₃ has by far the largest a (its molecules attract strongly, partly through hydrogen bonding), so it has the highest critical temperature and liquefies most easily.
-
11. What are the units of the van der Waals constants b and a respectively?
- mol dm⁻³ and dm³ atm mol⁻¹
- dm³ mol⁻¹ and dm⁶ atm mol⁻²
- dm³ mol and dm⁶ atm mol²
- both are dimensionless
Show answer
Answer: B. nb is a volume, so b has units of volume per mole (dm³ mol⁻¹). an²/V² is a pressure, so a = P × V²/n², which is atm dm⁶ mol⁻².
-
12. Which statement about the compressibility factor Z is correct?
- Z is always 1 for real gases at room temperature.
- Z < 1 means the molecules' own volume dominates.
- Below its Boyle temperature, Z of a gas first falls below 1 and then rises above 1 as pressure increases.
- Z does not depend on temperature.
Show answer
Answer: C. Below the Boyle temperature, attractions dominate at moderate pressure (Z < 1); at high pressure the molecular volume dominates (Z > 1), so Z passes through a minimum. Z < 1 means attractions dominate, and Z does change with temperature.
-
13. A gas has a = 4.17 dm⁶ atm mol⁻² and b = 0.0371 dm³ mol⁻¹. What is its critical temperature? (R = 0.0821 dm³ atm mol⁻¹ K⁻¹)
- 1369 K
- 203 K
- 406 K
- 812 K
Show answer
Answer: C. Tc = 8a/27Rb = (8 × 4.17) ÷ (27 × 0.0821 × 0.0371) = 33.36 ÷ 0.08224 = 406 K, close to the measured value for ammonia (405.5 K). 1369 K is a/Rb, which leaves out the factor 8/27.
-
14. Assertion (A): The critical temperature of CO₂ is 304 K, so CO₂ can be liquefied above 304 K by applying high pressure. Reason (R): At constant temperature, the volume of a given mass of gas is directly proportional to its pressure.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- Both A and R are false.
Show answer
Answer: D. A is false: above its critical temperature a gas cannot be liquefied however great the pressure. R is false too: by Boyle's law volume is inversely, not directly, proportional to pressure.
-
15. Hydrogen at room temperature warms up instead of cooling when it expands through a throttle valve. What must be done to liquefy it by the Joule-Thomson method?
- Raise its pressure above its critical pressure at room temperature.
- Heat it above its inversion temperature first.
- Pre-cool it below its inversion temperature, then expand it repeatedly.
- Mix it with helium.
Show answer
Answer: C. A gas cools on Joule-Thomson expansion only below its inversion temperature. Hydrogen's is about 200 K, below room temperature, so it is first pre-cooled (for example with liquid nitrogen) and then expanded repeatedly. Room temperature is also far above its critical temperature (33 K), so pressure alone cannot liquefy it.
Questions 1-3: lessons 1 and 2. Questions 4-5: lesson 2. Questions 6-9: lesson 3. Questions 10-12: lesson 4. Questions 13-15: lesson 5.
Sign in to keep track of the lessons you finish.