- Practice
- About 22 min
- 5 practice questions
Electric current, drift velocity and current density
Define current and the ampere, distinguish conventional current from electron flow, and use drift velocity, mobility, I = neAv_d and J = σE, the microscopic form of Ohm's law.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why a potential difference is needed for a steady flow of charge.
- Define average and instantaneous current and the ampere.
- State the direction of conventional current and of electron flow.
- Explain drift velocity, mean free time and mobility, v_d = (eτ/m)E.
- Derive I = neAv_d and define current density J = I/A.
- Write the microscopic form of Ohm's law, J = σE, with σ = ne²τ/m.
Unit 1 dealt with charges at rest. In real materials charges are seldom still: the free electrons in a copper wire are always in random motion. Current electricity studies charges in motion. It began with Alessandro Volta's battery, which gave the first steady electric current, and it now runs machines, communication systems, home appliances and electronic devices.
Why charges flow
In a metal, each atom gives up one or more loosely bound outer electrons. These free electrons wander randomly through the metal; the atoms left behind are positive ions fixed in place, which do not carry current. With both ends of a wire at the same potential, as many electrons move one way as the other, so there is no net flow, just as water does not flow between two tanks at the same level. A battery creates a potential difference between the ends. Positive charge tends to move from higher to lower potential and negative charge from lower to higher, so the free electrons drift towards the positive terminal and a net current flows. Note that the battery does not supply the electrons; they are already in the wire. The battery supplies energy. A phone 'charging' is really its battery storing energy, not collecting electrons.
Electric current
Electric current is the rate of flow of charge through a cross-section of a conductor. If charge ΔQ crosses in time Δt, the average current is I_avg = ΔQ/Δt; the instantaneous current is I = dQ/dt, the limit as Δt → 0. The SI unit is the ampere (A): 1 A = 1 C s⁻¹, one coulomb passing a cross-section each second. Current is a scalar: it has a sense along the wire but does not add like a vector at a junction. In nature, a lightning bolt carries a huge current for a very short time.
Conventional current is taken in the direction in which positive charge would move: from the positive terminal of the battery, through the external circuit, to the negative terminal. In metals the charges that actually move are electrons, which travel the opposite way. A flow of negative charge one way is equivalent to a flow of positive charge the other way, so both descriptions give the same current.
Worked example 1: charge and electrons
(a) A charge of 180 C flows through a lamp in 2.0 minutes. Find the current. I = Q/t = 180 C/(120 s) = 1.5 A. (b) How many electrons pass a cross-section of a wire each second when the current is 4.8 A? In one second Q = 4.8 C, and Q = ne, so n = 4.8/(1.6 × 10⁻¹⁹) = 3.0 × 10¹⁹ electrons.
Drift velocity and mobility
With no field, the electrons move fast but in random directions, repeatedly colliding with the vibrating ions, and their average velocity is zero. When a field E⃗ is applied, each electron is accelerated between collisions with a = −eE⃗/m (opposite to E⃗ because its charge is negative), and each collision randomises its direction again. The result is a zigzag path with a slow net drift opposite to E⃗. The drift velocity v_d is the average velocity the electrons acquire under the field. If τ is the mean free time (the average time between successive collisions), v⃗_d = a⃗τ = −(eτ/m)E⃗ = −μE⃗. The quantity μ = eτ/m = v_d/E is the mobility: the drift speed per unit field, with unit m² V⁻¹ s⁻¹.
A typical drift velocity in a wire is only about 10⁻⁴ m s⁻¹, so an electron leaving the battery would take hours to reach a bulb. Yet the bulb lights at once. The reason is that when the circuit is closed, the electric field (the push on the electrons) is set up all along the wire almost instantly, travelling at nearly the speed of light, so electrons everywhere in the circuit start drifting together. Energy, not the individual electrons, travels quickly from battery to bulb.
How a steady drift develops
- Battery sets up a field A potential difference creates a field E along the wire.
- Electrons accelerate Each free electron gains velocity opposite to E between collisions: a = eE/m.
- Collisions with ions After about τ seconds a collision scatters the electron in a random direction.
- Net drift On average the electrons creep along at v_d = eEτ/m, opposite to E, giving a steady current.
Microscopic model of current
Consider a conductor of cross-section A with n free electrons per unit volume, all drifting with speed v_d. In time dt they move a distance dx = v_d dt, so the electrons in a slice of volume A dx = Av_d dt all cross a given section. The charge crossing is dQ = (e)(nAv_d dt). Hence I = dQ/dt = neAv_d. The current density is the current per unit area of cross-section held perpendicular to the flow, J = I/A = nev_d, with unit A m⁻². Unlike current, current density is a vector, J⃗ = nev⃗_d (pointing, by convention, along E⃗). The current through an area is I = J⃗·A⃗ = JA cos θ; this scalar product is why current itself is a scalar and can be positive or negative depending on which way the area vector is chosen.
Substituting v_d = eEτ/m gives J = (ne²τ/m)E. Taking the conventional direction of J⃗ along E⃗, J⃗ = σE⃗, where σ = ne²τ/m is the electrical conductivity of the material. This is the microscopic form of Ohm's law. Its reciprocal, ρ = 1/σ = m/(ne²τ), is the resistivity.
I = dQ/dt; I = neAv_d; J = I/A = nev_d; v_d = (eτ/m)E = μE; J = σE with σ = ne²τ/m.
Worked example 2: drift velocity in a copper wire
A copper wire of cross-section 2.5 mm² carries 3.0 A. Take the free-electron density as 8.4 × 10²⁸ m⁻³, the value used in the Tamil Nadu textbook. Find v_d and J. Step 1: A = 2.5 mm² = 2.5 × 10⁻⁶ m². Step 2: neA = (8.4 × 10²⁸)(1.6 × 10⁻¹⁹)(2.5 × 10⁻⁶) = 3.36 × 10⁴ C m⁻¹. Step 3: v_d = I/(neA) = 3.0/(3.36 × 10⁴) ≈ 8.9 × 10⁻⁵ m s⁻¹, less than a tenth of a millimetre each second. Step 4: J = I/A = 3.0/(2.5 × 10⁻⁶) = 1.2 × 10⁶ A m⁻².
Worked example 3: drift from the mean free time
In a metal the mean free time is 2.5 × 10⁻¹⁴ s (an assumed value). Find the mobility of the electrons and their drift speed in a field of 0.10 V m⁻¹. (m = 9.1 × 10⁻³¹ kg.) Step 1: μ = eτ/m = (1.6 × 10⁻¹⁹ × 2.5 × 10⁻¹⁴)/(9.1 × 10⁻³¹) = (4.0 × 10⁻³³)/(9.1 × 10⁻³¹) ≈ 4.4 × 10⁻³ m² V⁻¹ s⁻¹. Step 2: v_d = μE = 4.4 × 10⁻³ × 0.10 ≈ 4.4 × 10⁻⁴ m s⁻¹.
Key takeaways
- Current is the rate of flow of charge, I = dQ/dt; 1 A = 1 C s⁻¹; it is a scalar.
- Conventional current flows from + to − outside the source, opposite to electron flow.
- Electrons drift slowly (about 10⁻⁴ m s⁻¹) opposite to E; the field itself spreads almost instantly.
- I = neAv_d, J = nev_d, and J⃗ = σE⃗ is Ohm's law at the microscopic level.
Check your understanding
-
1. A steady current of 0.50 A flows through a wire for 4.0 minutes. The charge that passes any cross-section is:
- 2.0 C
- 120 C
- 8.0 C
- 30 C
Show answer
Answer: B. Q = It = 0.50 A × (4.0 × 60 s) = 0.50 × 240 = 120 C. Minutes must be converted to seconds.
-
2. When a current of 1.6 A flows through a wire, the number of electrons crossing a section each second is:
- 1.6 × 10¹⁹
- 2.56 × 10⁻¹⁹
- 6.25 × 10¹⁸
- 1.0 × 10¹⁹
Show answer
Answer: D. In 1 s, Q = 1.6 C. n = Q/e = 1.6/(1.6 × 10⁻¹⁹) = 1.0 × 10¹⁹ electrons.
-
3. The drift velocity of the free electrons in a metal wire carrying a current is directed:
- opposite to the applied electric field
- along the applied electric field
- perpendicular to the wire
- randomly, with no net direction
Show answer
Answer: A. Electrons are negative, so the force −eE⃗ and hence their average drift are opposite to E⃗. Conventional current, which is along E⃗, is therefore opposite to the electron drift.
-
4. Two wires of the same metal carry the same current. Wire Y has half the cross-sectional area of wire X. The drift speed in Y is:
- half that in X
- the same as in X
- twice that in X
- four times that in X
Show answer
Answer: C. v_d = I/(neA). With I, n and e the same, v_d ∝ 1/A. Halving A doubles the drift speed.
-
5. Drift speeds are only about 10⁻⁴ m s⁻¹, yet a bulb glows the moment it is switched on because:
- electrons leave the battery at the speed of light
- the bulb stores electrons
- the battery creates new electrons in the bulb
- the electric field is set up along the whole circuit almost instantly, so all free electrons start drifting together
Show answer
Answer: D. The wire is already full of free electrons. When the switch closes, the field travels along the circuit at nearly the speed of light, so electrons in the bulb's filament start moving at once. Energy travels quickly; individual electrons do not.
Sign in to keep track of the lessons you finish.