• Practice
  • About 25 min
  • 5 practice questions

Magnetic flux, Faraday's laws, Lenz's law and motional emf

Calculate magnetic flux, use Faraday's two laws to find induced emf, fix its direction with Lenz's law and Fleming's right hand rule, and derive the motional emf ε = Blv from the Lorentz force.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define magnetic flux Φ_B = ∫B·dA = BA cos θ and use its unit, the weber.
  • Describe what Faraday's two experiments showed and state his two laws.
  • Use ε = −d(NΦ_B)/dt to calculate an induced emf.
  • Find the direction of an induced current with Lenz's law and Fleming's right hand rule.
  • Derive the motional emf ε = Blv from the Lorentz force, and find the emf of a rod rotating in a field.

In the previous unit you saw that an electric current produces a magnetic field (Oersted) and that a current loop behaves like a bar magnet (Ampere). The natural question is the reverse one: can a magnetic field produce a current? Michael Faraday in England and Joseph Henry in America answered it independently, and Faraday is credited with the discovery of electromagnetic induction in 1831. Every power station generator and every transformer in the Tamil Nadu grid works on this one idea.

Magnetic flux

The magnetic flux Φ_B through an area is a measure of the number of magnetic field lines crossing that area normally. In general Φ_B = ∫ B·dA, the integral being taken over the area. For a uniform field B over a flat area A, Φ_B = BA cos θ, where θ is the angle between B and the normal (perpendicular) to the area. When the field is perpendicular to the surface (θ = 0°) the flux is a maximum, BA; when the field lies along the surface (θ = 90°) the flux is zero. The SI unit is the weber: 1 Wb = 1 T m².

Common trap: questions often give the angle between the field and the plane of the coil. The angle you need in BA cos θ is the angle with the normal, so θ = 90° − (angle with the plane).

Worked example 1: flux through a tilted coil

A flat coil of area 0.050 m² is in a uniform field of 0.60 T. The plane of the coil makes 30° with the field. Find the flux through it. Step 1: angle with the normal, θ = 90° − 30° = 60°. Step 2: Φ_B = BA cos θ = 0.60 × 0.050 × cos 60° = 0.030 × 0.5 = 0.015 Wb. Answer: 0.015 Wb (15 mWb).

Faraday's experiments

First experiment (magnet and coil). A coil is connected to a galvanometer, with no battery. Pushing the north pole of a bar magnet into the coil gives a momentary deflection. Holding the magnet still inside gives none. Pulling it out gives a deflection the other way. Moving the magnet faster gives a larger deflection, and using the south pole reverses the deflections. Moving the coil instead of the magnet gives the same results. So a current appears whenever there is relative motion between magnet and coil.

Second experiment (two coils). A primary coil with a battery and key sits near a secondary coil joined to a galvanometer. At the moment the key is closed the galvanometer kicks; once the primary current is steady it reads zero; when the key is opened it kicks the other way. So a current is induced in the secondary whenever the current in the primary changes.

Both experiments have one explanation: in each case the magnetic flux linked with the closed coil is changing. Approaching magnet or growing primary current: flux increases. Receding magnet or falling primary current: flux decreases, and the induced current reverses. Steady magnet or steady current: no change, no current.

Faraday's laws

  1. First law: whenever the magnetic flux linked with a closed circuit changes, an emf is induced in it, and it lasts only as long as the flux keeps changing.
  2. Second law: the magnitude of the induced emf equals the time rate of change of the magnetic flux linked with the circuit.

For a tightly wound coil of N turns, each linked by flux Φ_B, the product NΦ_B is called the flux linkage, and the emf is ε = d(NΦ_B)/dt in magnitude.

Worked example 2: emf from a changing field

A coil of 250 turns and area 80 cm² lies with its plane perpendicular to a magnetic field. The field rises steadily from 0.20 T to 0.80 T in 0.12 s. Find the induced emf. Step 1: A = 80 × 10⁻⁴ m² = 8.0 × 10⁻³ m². Step 2: change in flux per turn, ΔΦ = ΔB × A = 0.60 × 8.0 × 10⁻³ = 4.8 × 10⁻³ Wb. Step 3: change in flux linkage = 250 × 4.8 × 10⁻³ = 1.2 Wb. Step 4: ε = 1.2 / 0.12 = 10 V. Answer: 10 V.

Lenz's law

Heinrich Lenz gave the rule for the direction: the induced current always flows in a direction that opposes the cause producing it. The cause is the change of flux, so the induced current makes its own field to resist that change. Putting this into Faraday's law gives ε = −d(NΦ_B)/dt, where the negative sign records the opposition.

  • Sliding arm on a frame: a field points into the page through a rectangular frame. If the movable arm slides so the enclosed area grows, the inward flux grows; the induced current makes an outward field inside the frame, so it flows anticlockwise. If the arm slides back, the inward flux falls; the induced field points inward to make up the loss, so the current is clockwise.
  • Magnet and solenoid: when a north pole approaches a solenoid, the near end of the solenoid becomes a north pole and repels the magnet. When the magnet is withdrawn, the near end becomes a south pole and attracts it, resisting the withdrawal.

Lenz's law and conservation of energy. Because the induced current always opposes the motion, an external agent must do work to move the magnet. That mechanical work becomes electrical energy and finally Joule heat in the coil. If the induced current helped the motion instead, a tiny push would make the magnet speed up by itself and electrical energy would appear from nothing: a perpetual motion machine, which is impossible. So Lenz's law is a direct consequence of the conservation of energy.

Using Lenz's law to find the current direction

  1. Identify the flux Which way does the existing field point through the loop?
  2. Is it rising or falling? Approach, growing current or growing area means rising flux.
  3. Choose the induced field Opposite to the existing field if flux rises; along it if flux falls.
  4. Apply the right hand thumb rule The induced field direction gives clockwise or anticlockwise current.

Worked example 3: emf and direction from a flux formula

The flux into the page through a single loop varies as Φ_B = (4t² + 2t + 1) mWb, with t in seconds. Find the emf at t = 2 s and the direction of the current. Step 1: dΦ_B/dt = (8t + 2) mWb s⁻¹. Step 2: at t = 2 s, dΦ_B/dt = 18 mWb s⁻¹, so |ε| = 18 mV. Step 3: the flux into the page is increasing, so the induced current must create a field out of the page; by the right hand thumb rule the current is anticlockwise as seen from the front.

Fleming's right hand rule

For a straight conductor moving through a field, stretch the thumb, forefinger (index finger) and middle finger of the right hand mutually perpendicular. If the forefinger points along the field and the thumb along the motion of the conductor, the middle finger gives the direction of the induced current. It is also called the generator rule.

Motional emf from the Lorentz force

Let a straight rod AB of length l move with constant velocity v to the right, perpendicular to a uniform field B pointing into the page. Each free electron moves with the rod and feels the magnetic Lorentz force F_B = −e(v × B), which pushes electrons towards end A. Electrons pile up at A, making it negative and B positive; this sets up an electric field E along BA, which pushes electrons back with a force −eE. The pile-up stops when the two forces balance: eE = evB, so E = vB. The potential difference across the rod is V = El = Blv, so the rod acts as a source of motional emf:

Φ_B = BA cos θ; ε = −d(NΦ_B)/dt; motional emf ε = Blv; rod rotating about one end: ε = ½Bωl².

If the ends of the rod are joined through an external circuit of total resistance R, a current i = ε/R = Blv/R flows. Rotating rod: a rod of length l spinning with angular velocity ω about one end, in a plane perpendicular to B, has different speeds along its length. An element dx at distance x moves at v = xω, so dε = Bxω dx. Integrating from 0 to l gives ε = ½Bωl².

Worked example 4: sliding rod and rotating rod

(a) A rod of length 0.40 m moves at 5.0 m s⁻¹ perpendicular to a 0.50 T field; its ends are joined by a circuit of total resistance 2.0 Ω. ε = Blv = 0.50 × 0.40 × 5.0 = 1.0 V, and i = 1.0/2.0 = 0.50 A. (b) A 0.50 m rod rotates at 40 rad s⁻¹ about one end in a perpendicular field of 0.20 T. ε = ½Bωl² = 0.5 × 0.20 × 40 × (0.50)² = 0.5 × 0.20 × 40 × 0.25 = 1.0 V.

Key takeaways

  • Flux Φ_B = BA cos θ, with θ measured from the normal; unit weber (T m²).
  • An emf is induced only while the flux linked with a circuit is changing: ε = −d(NΦ_B)/dt.
  • Lenz's law: the induced current opposes its cause; it follows from conservation of energy.
  • Fleming's right hand rule: forefinger field, thumb motion, middle finger current.
  • A conductor moving across a field has motional emf Blv; a rod rotating about one end has ½Bωl².

Check your understanding

  1. 1. One weber is equal to:

    1. 1 T m⁻²
    2. 1 T m²
    3. 1 T A m
    4. 1 V s⁻¹
    Show answer

    Answer: B. Φ_B = BA, so the unit is tesla × square metre: 1 Wb = 1 T m². (It is also 1 V s, since emf = flux/time.)

  2. 2. The flux through each turn of a 50-turn coil falls from 4 mWb to 1 mWb in 0.05 s. The magnitude of the average induced emf is:

    1. 0.06 V
    2. 0.3 V
    3. 60 V
    4. 3 V
    Show answer

    Answer: D. Change in flux per turn = 3 mWb = 3 × 10⁻³ Wb. ε = NΔΦ/Δt = 50 × 3 × 10⁻³ / 0.05 = 0.15/0.05 = 3 V.

  3. 3. Lenz's law is a consequence of the law of conservation of:

    1. energy
    2. charge
    3. linear momentum
    4. mass
    Show answer

    Answer: A. The induced current opposes the motion, so work must be done to keep the flux changing; that work is the source of the electrical energy. If it aided the motion, energy would be created from nothing.

  4. 4. In Fleming's right hand rule, the middle finger shows the direction of:

    1. the magnetic field
    2. the motion of the conductor
    3. the induced current
    4. the force on the conductor
    Show answer

    Answer: C. Forefinger: field. Thumb: motion of the conductor. Middle finger: induced current.

  5. 5. A rod 0.25 m long moves at 8 m s⁻¹ at right angles to a magnetic field of 0.3 T, its length also perpendicular to the field. The emf across its ends is:

    1. 0.06 V
    2. 0.6 V
    3. 6 V
    4. 9.6 V
    Show answer

    Answer: B. ε = Blv = 0.3 × 0.25 × 8 = 0.6 V.

Privacy · Terms · Refunds · Delivery