- Practice
- About 25 min
- 5 practice questions
Power in AC circuits and LC oscillations
Derive the average power V_RMS I_RMS cos φ, explain wattless current and power factor, weigh AC against DC, and follow the energy exchange in LC oscillations and its analogy with a spring-mass system.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive the average power in an AC circuit, P_av = V_RMS I_RMS cos φ.
- Distinguish true power, apparent power, wattful and wattless current.
- State the three definitions of power factor and its value in R, L, C and RLC circuits.
- List the advantages and disadvantages of AC over DC.
- Describe LC oscillations, prove the total energy is constant, and use ω = 1/√(LC) and the spring-mass analogy.
Power is the rate at which electrical energy is consumed: voltage × current. In AC both change every instant, so we find the instantaneous power and then average it over a cycle. The answer depends not only on the sizes of voltage and current but on the phase between them.
Average power
Let v = V_m sin ωt and i = I_m sin(ωt + φ). Instantaneous power P = vi = V_mI_m sin ωt [sin ωt cos φ + cos ωt sin φ] = V_mI_m [cos φ sin²ωt + sin φ sin ωt cos ωt]. Over a complete cycle the average of sin²ωt is ½ and the average of sin ωt cos ωt is 0. So P_av = ½V_mI_m cos φ = (V_m/√2)(I_m/√2) cos φ, that is P_av = V_RMS I_RMS cos φ. The product V_RMS I_RMS is the apparent power; cos φ is the power factor; P_av is the true power.
Wattful and wattless current
Let V_RMS lead I_RMS by φ. Resolve I_RMS into I_RMS cos φ along V_RMS and I_RMS sin φ at right angles to it. The in-phase part, the active or wattful current, consumes power V_RMS I_RMS cos φ. The perpendicular part, the reactive or wattless current, is 90° out of phase with the voltage and consumes no power. A current is wattless if the power it consumes is zero, which happens in a purely inductive or purely capacitive circuit.
Power factor
- Power factor = cos φ, the cosine of the angle of lead or lag.
- Power factor = R/Z = resistance/impedance.
- Power factor = P_av/(V_RMS I_RMS) = true power/apparent power.
| Circuit | Opposition | Phase of current with voltage | Power factor | Average power |
|---|---|---|---|---|
| Pure R | R | 0° | 1 | V_RMS I_RMS |
| Pure L | X_L = ωL | lags by 90° | 0 | 0 |
| Pure C | X_C = 1/ωC | leads by 90° | 0 | 0 |
| Series RLC | √(R² + (ωL − 1/ωC)²) | between 0° and 90°, lag or lead | between 0 and 1 | V_RMS I_RMS cos φ |
| RLC at resonance | R | 0° | 1 | V_RMS I_RMS |
Worked example 1: true power and wattless current
A circuit takes 5.0 A RMS from a 220 V RMS supply, the voltage leading the current by 60°. Apparent power = 220 × 5.0 = 1100 VA. Power factor = cos 60° = 0.50. True power = 1100 × 0.50 = 550 W. Wattful current = 5.0 × cos 60° = 2.5 A. Wattless current = 5.0 × sin 60° = 5.0 × 0.866 = 4.33 A.
Worked example 2: power factor from R and Z
R = 60 Ω, X_L = 120 Ω, X_C = 40 Ω in series on 200 V RMS. Z = √(60² + 80²) = √(3600 + 6400) = 100 Ω. I_RMS = 200/100 = 2.0 A. Power factor = R/Z = 0.60. P_av = 200 × 2.0 × 0.60 = 240 W. Check: all the power is used in the resistor, I²R = 4.0 × 60 = 240 W. The inductor and capacitor take energy and give it back every cycle.
AC compared with DC
AC versus DC (as listed in the textbook)
-
Advantages of AC
- Cheaper to generate
- Lower losses when transmitted at high voltage
- Easily converted to DC by rectifiers
-
Disadvantages of AC
- Cannot be used for charging batteries, electroplating, electric traction and similar uses
- At high voltages it is more dangerous to work with than DC
LC oscillations
An inductor stores energy in its magnetic field (½Li²) and a capacitor in its electric field (q²/2C). Join a charged capacitor to a pure inductor and the energy surges back and forth between the two fields, producing electrical oscillations of a definite frequency: LC oscillations.
One cycle of LC oscillation
- Capacitor fully charged q = Q_m, i = 0: energy Q_m²/2C, wholly electrical.
- Capacitor discharges Current grows in the inductor; energy is shared between the two fields.
- Capacitor empty, current maximum q = 0, i = I_m: energy ½LI_m², wholly magnetic. The inductor keeps the current flowing.
- Capacitor charges the opposite way The collapsing magnetic field drives the current on with falling size.
- Fully charged, reversed i = 0, wholly electrical again; then the whole process repeats with the current in the opposite direction.
Then back to step 1: Capacitor fully charged
In an ideal LC circuit nothing is lost, so the oscillations continue for ever: undamped oscillations. In practice Joule heating and the radiation of electromagnetic waves drain the energy, and the oscillations are damped.
Conservation of energy
Total energy U = q²/2C + ½Li². Case 1 (q = Q_m, i = 0): U = Q_m²/2C. Case 2 (q = 0, i = I_m): U = ½LI_m²; since I_m = ωQ_m with ω² = 1/LC, this is ½L × Q_m²/(LC) = Q_m²/2C. Case 3 (general): q = Q_m cos ωt and i = dq/dt = −ωQ_m sin ωt (the minus sign shows the charge decreasing). Then U = Q_m²cos²ωt/2C + ½Lω²Q_m²sin²ωt = (Q_m²/2C)(cos²ωt + sin²ωt) = Q_m²/2C. The total energy is the same at every instant.
Analogy with a spring-mass system
| LC circuit | Spring-mass system |
|---|---|
| Charge q | Displacement x |
| Current i = dq/dt | Velocity v = dx/dt |
| Inductance L | Mass m |
| Reciprocal of capacitance 1/C | Force constant k |
| Electrical energy q²/2C | Potential energy ½kx² |
| Magnetic energy ½Li² | Kinetic energy ½mv² |
A spring-mass system oscillates with ω = √(k/m). Replacing k by 1/C and m by L gives the angular frequency of LC oscillations:
P_av = V_RMS I_RMS cos φ; power factor = cos φ = R/Z; LC oscillations: ω = 1/√(LC), total energy Q_m²/2C = ½LI_m², I_m = ωQ_m.
Worked example 3: an LC circuit
A 10 μF capacitor charged to 50 μC is connected to a 25 mH inductor. Step 1: LC = 25 × 10⁻³ × 10 × 10⁻⁶ = 2.5 × 10⁻⁷ s², √(LC) = 5.0 × 10⁻⁴ s, so ω = 2000 rad s⁻¹ and f = 2000/(2π) = 318 Hz. Step 2: total energy U = Q_m²/2C = (50 × 10⁻⁶)²/(2 × 10 × 10⁻⁶) = 2.5 × 10⁻⁹/2.0 × 10⁻⁵ = 1.25 × 10⁻⁴ J. Step 3: maximum current I_m = ωQ_m = 2000 × 50 × 10⁻⁶ = 0.10 A. Check: ½LI_m² = 0.5 × 0.025 × 0.010 = 1.25 × 10⁻⁴ J, the same energy.
Key takeaways
- True power P_av = V_RMS I_RMS cos φ; apparent power V_RMS I_RMS; power factor cos φ = R/Z.
- The component I_RMS sin φ is wattless; a pure L or pure C circuit consumes no average power.
- Power factor is 1 for pure R and at resonance, 0 for pure L or C, and between 0 and 1 otherwise.
- In LC oscillations energy passes between capacitor and inductor; the total stays Q_m²/2C.
- L is like mass and 1/C like the spring constant, so ω = 1/√(LC).
Check your understanding
-
1. The average power consumed over a cycle by a pure inductor connected to an AC source is:
- V_RMS I_RMS
- ½V_mI_m
- zero
- V_mI_m
Show answer
Answer: C. In a pure inductor φ = 90°, so cos φ = 0 and P_av = V_RMS I_RMS × 0 = 0. The current is wholly wattless.
-
2. A circuit draws 2 A RMS from a 100 V RMS supply with a power factor of 0.8. The true power is:
- 200 W
- 250 W
- 120 W
- 160 W
Show answer
Answer: D. P_av = V_RMS I_RMS cos φ = 100 × 2 × 0.8 = 160 W. The apparent power is 200 VA.
-
3. The power factor of a series RLC circuit at resonance is:
- 1
- 0
- 0.5
- 0.707
Show answer
Answer: A. At resonance X_L = X_C, so Z = R and φ = 0: cos φ = R/Z = 1.
-
4. In the analogy between an LC circuit and a spring-mass system, the inductance L corresponds to:
- the force constant k
- the mass m
- the displacement x
- the velocity v
Show answer
Answer: B. Magnetic energy ½Li² matches kinetic energy ½mv², with i matching v, so L matches m. It is 1/C that matches k.
-
5. An LC circuit has L = 0.5 H and C = 2 μF. The angular frequency of its oscillations is:
- 100 rad s⁻¹
- 500 rad s⁻¹
- 10 000 rad s⁻¹
- 1000 rad s⁻¹
Show answer
Answer: D. LC = 0.5 × 2 × 10⁻⁶ = 1.0 × 10⁻⁶ s², √(LC) = 1.0 × 10⁻³ s, so ω = 1/√(LC) = 1000 rad s⁻¹.
Sign in to keep track of the lessons you finish.