Revision notes

Electrochemistry: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Redox reactions and the galvanic cell

Oxidation is loss of electrons, reduction is gain. Anode = oxidation, cathode = reduction (memory aid: AN OX and RED CAT). In a galvanic cell electrons flow from anode to cathode through the wire.

Key takeaways: every redox reaction splits into an oxidation half and a reduction half; a galvanic cell keeps them apart so electrons flow through a wire; the salt bridge keeps the solutions neutral; and the cell notation puts the anode on the left.

Read the full lesson

Lesson 2

Electrode potentials and the electrochemical series

Standard reduction potentials at 298 K
Half-reaction (reduction)E° / V
Li+ + e− → Li−3.05
K+ + e− → K−2.93
Mg2+ + 2e− → Mg−2.36
Zn2+ + 2e− → Zn−0.76
Fe2+ + 2e− → Fe−0.44
2H+ + 2e− → H20.00
Cu2+ + 2e− → Cu+0.34
Ag+ + e− → Ag+0.80
Cl2 + 2e− → 2Cl−+1.36
F2 + 2e− → 2F−+2.87

E°cell = E°cathode − E°anode (both as reduction potentials). Higher E° = cathode = stronger oxidising agent. Positive E°cell means the reaction is spontaneous. Never multiply E° by the coefficients.

Key takeaways: the SHE is the zero of the scale; positive E° means a good oxidising agent and negative E° a good reducing agent; a metal higher (more negative) in the series displaces one lower down; and the cell voltage is simply cathode minus anode.

Read the full lesson

Lesson 3

The Nernst equation and Gibbs energy

Nernst at 298 K: E = E° − (0.059/n) log Q. Gibbs energy: ΔG° = −nFE°, with F = 96 500 C/mol. Positive E means negative ΔG and a spontaneous reaction; E = 0 means equilibrium.

Key takeaways: write Q exactly as for an equilibrium, without the solid electrodes; remember the 0.059/n factor; more reactant ions raise E and more product ions lower it; and convert voltage to energy with ΔG = −nFE, keeping track of joules versus kilojoules.

Read the full lesson

Lesson 4

Conductance of electrolyte solutions

κ = G* ÷ R; Λm = κ × 1000 ÷ C (S cm^2 mol^−1). On dilution κ falls and Λm rises. Kohlrausch: Λ°m = sum of the limiting ionic conductivities, each times its number in the formula.

Key takeaways: keep units consistent (S cm^−1 with mol/L and the factor 1000); the cell constant is found once with a standard solution; strong and weak electrolytes differ in how Λm changes on dilution; and Kohlrausch's law gives Λ°m of a weak electrolyte by adding and subtracting strong ones.

Read the full lesson

Lesson 5

Electrolysis, Faraday's laws, batteries and corrosion

Q = I × t; 1 F = 96 500 C = charge on 1 mol of electrons. Moles deposited = (I × t) ÷ (96 500 × n). Same charge in series: moles of electrons are equal everywhere.

Key takeaways: convert time to seconds, find moles of electrons first, then divide by n for the substance; check which ion or water is easier to oxidise or reduce; and remember that batteries and rusting are both galvanic cells, while plating and extraction are electrolysis.

Read the full lesson

Lesson 6

Primary and secondary cells: dry cell, lead storage battery and fuel cell

Primary and secondary cells
KindExamplesCan it be recharged?
PrimaryDry cell, mercury button cellNo
SecondaryLead storage battery, nickel-cadmium cellYes

Primary cells are used once. Secondary cells can be recharged. Fuel cells run as long as fuel is supplied.

— Rule to remember

Key takeaways: primary cells cannot be recharged and secondary cells can; the dry cell has a zinc anode and a graphite cathode; a lead storage cell gives about 2 V; voltages add when cells are joined in series.

Read the full lesson

Lesson 7

Corrosion and rusting: why it happens and how to prevent it

Three-test-tube experiment
TubeConditionsDoes the nail rust?
1Dry air (a drying agent such as calcium chloride is used to take away moisture)No
2Boiled water (which has no dissolved air) with a layer of oil on topNo
3Ordinary tap water, open to the airYes

Iron + oxygen + water gives rust. Remove any one of them and rusting stops.

— Rule to remember
Methods of preventing rusting
MethodHow it worksExample
Painting or oilingKeeps air and water awayGates, bicycle chains
GalvanisingCoats iron with zinc, which protects even when scratchedBuckets, roofing sheets
Tin platingCoating of tin keeps out air and waterFood cans
AlloyingMixing iron with chromium and nickel gives stainless steelCutlery, sinks
Sacrificial metalA more reactive metal such as magnesium is joined to the iron and corrodes insteadShip hulls, buried pipes

Key takeaways: rusting needs oxygen and water; salt speeds it up; aluminium protects itself but iron does not; paint, oil, zinc, tin, alloying and sacrificial metals are the main protections.

Read the full lesson

Lesson 8

Galvanic and electrolytic cells compared, and what electrolysis is used for

Galvanic and electrolytic cells
FeatureGalvanic cellElectrolytic cell
Energy changeChemical to electricalElectrical to chemical
ReactionSpontaneousNon-spontaneous; driven by a battery
Anode (oxidation)NegativePositive
Cathode (reduction)PositiveNegative
ElectrodesUsually in separate containers joined by a salt bridgeUsually both in one container
ExampleDaniell cellElectroplating

Oxidation is always at the anode and reduction is always at the cathode. The signs change: in a galvanic cell the anode is negative, in an electrolytic cell it is positive.

— Rule to remember

Key takeaways: galvanic cells produce electricity and electrolytic cells use it; anode means oxidation in both; plating uses the object as the cathode; refining uses impure metal as the anode; reactive metals are extracted from molten compounds.

Read the full lesson

Lesson 9

Conductors, electrolytes and why some solutions conduct better than others

Metallic and electrolytic conduction
FeatureMetallic conductionElectrolytic conduction
Charge carriersElectronsPositive and negative ions
Chemical changeNoneYes, at the electrodes
Effect of heatingConduction decreasesConduction increases
ExamplesCopper, silver, ironNaCl solution, molten salts
Classifying substances
ClassExamplesReason
Strong electrolyteNaCl, HCl, NaOH, KNO3Almost completely ionised
Weak electrolyteAcetic acid, ammonia solution, carbonic acidOnly a small fraction ionised
Non-electrolyteSugar, urea, alcohol, glucoseNo ions are formed

Current in metals is carried by electrons; in solutions it is carried by ions. More free ions in solution means better conduction.

— Rule to remember

Key takeaways: metals conduct by electrons and electrolytes by ions; strong electrolytes ionise almost completely and weak ones only slightly; heating raises conduction in solutions but lowers it in metals; conductance is the inverse of resistance.

Read the full lesson

Privacy · Terms · Refunds · Delivery