- Foundation
- About 15 min
- 5 practice questions
Electrolysis, Faraday's laws, batteries and corrosion
Calculate the mass of a substance deposited by a current, predict products of simple electrolyses and see how batteries and corrosion fit the same chemistry.
If something looks wrong, please tell us.
A galvanic cell turns a reaction into current. Electrolysis does the reverse: an outside source pushes current through a liquid to force a reaction that would not happen by itself. It is how metals are plated and how reactive metals are extracted. Faraday's laws make it quantitative, and the same chemistry explains how batteries work and why iron rusts.
The electrolytic cell
In an electrolytic cell the anode is connected to the positive terminal of the supply and the cathode to the negative terminal. Oxidation still happens at the anode and reduction at the cathode, but the signs of the electrodes are the reverse of a galvanic cell. Positive ions (cations) move to the cathode and negative ions (anions) to the anode.
Faraday's laws
- First law: the mass of substance produced at an electrode is proportional to the charge passed. Charge Q = current I (amperes) × time t (seconds), in coulombs.
- One faraday (1 F) = 96 500 C, the charge on one mole of electrons.
- Moles of electrons = Q ÷ 96 500. Moles of substance = moles of electrons ÷ n, where n is the number of electrons in its half-reaction.
- Second law: when the same charge passes through different electrolytes in series, the masses deposited are in the ratio of their equivalent masses (molar mass ÷ n).
Worked example 1: copper plating
A current of 2 A flows for 965 s through copper sulphate solution. Q = 2 × 965 = 1930 C. Moles of electrons = 1930 ÷ 96 500 = 0.02. Cu2+ + 2e− → Cu, so moles of copper = 0.02 ÷ 2 = 0.01, and mass = 0.01 × 63.5 = 0.635 g.
Worked example 2: time needed
How long must 0.5 A flow to deposit 1.08 g of silver (108 g/mol)? Moles of Ag = 0.01. Ag+ + e− → Ag, so 0.01 mol of electrons are needed: Q = 0.01 × 96 500 = 965 C. t = 965 ÷ 0.5 = 1930 s, a little over 32 minutes.
Worked example 3: cells in series
The charge that deposits 2.16 g of silver also passes through a copper sulphate cell. Moles of electrons = 2.16 ÷ 108 = 0.02. Copper needs 2 electrons per atom, so 0.01 mol Cu = 0.635 g. Check with the second law: equivalent masses are 108 and 31.75, and 2.16 ÷ 108 = 0.635 ÷ 31.75 = 0.02.
What forms at each electrode
In molten sodium chloride only Na+ and Cl− are present, so sodium forms at the cathode and chlorine at the anode. In aqueous sodium chloride, water competes: it is reduced more easily than Na+, so hydrogen forms at the cathode, chlorine at the anode, and sodium hydroxide is left in solution. Dilute sulphuric acid with platinum electrodes gives hydrogen at the cathode and oxygen at the anode, in a 2 : 1 volume ratio, because the net change is the splitting of water.
Batteries and corrosion
A primary cell, such as the common dry cell, cannot be recharged once its reaction is over. A secondary cell, such as the lead storage battery, can be recharged by passing current in the opposite direction, which reverses the reaction. A fuel cell, such as the hydrogen–oxygen cell, keeps working as long as the reactants are supplied. Rusting of iron is also electrochemical: on a wet surface iron is oxidised at one spot (an anode) while oxygen is reduced at another (a cathode). Coating iron with zinc, called galvanisation, protects it because zinc is more easily oxidised than iron and corrodes first.
Q = I × t; 1 F = 96 500 C = charge on 1 mol of electrons. Moles deposited = (I × t) ÷ (96 500 × n). Same charge in series: moles of electrons are equal everywhere.
Key takeaways: convert time to seconds, find moles of electrons first, then divide by n for the substance; check which ion or water is easier to oxidise or reduce; and remember that batteries and rusting are both galvanic cells, while plating and extraction are electrolysis.
Check your understanding
-
1. One faraday is
- the charge on one electron
- 1 coulomb per second
- the charge on one mole of electrons, about 96 500 C
- the charge needed to deposit 1 g of any metal
Show answer
Answer: C. 1 F = 96 500 C, the charge carried by one mole (6.022 × 10^23) of electrons.
-
2. A current of 5 A flows for 193 s through silver nitrate solution. The mass of silver deposited (108 g/mol) is
- 0.54 g
- 1.08 g
- 2.16 g
- 10.8 g
Show answer
Answer: B. Q = 5 × 193 = 965 C = 0.01 F. Ag+ + e− → Ag, so 0.01 mol Ag = 1.08 g.
-
3. In the electrolysis of aqueous sodium chloride, the product at the cathode is
- sodium metal
- chlorine
- oxygen
- hydrogen
Show answer
Answer: D. Water is reduced more easily than Na+ ions, so hydrogen gas forms at the cathode; chlorine forms at the anode.
-
4. How many faradays are needed to deposit 1 mol of aluminium from Al3+?
- 3 F
- 1 F
- 2 F
- 6 F
Show answer
Answer: A. Al3+ + 3e− → Al, so 3 mol of electrons, that is 3 F, per mole of aluminium.
-
5. Iron coated with zinc is protected from rusting mainly because
- zinc does not conduct electricity
- zinc is more easily oxidised than iron, so it corrodes first
- zinc reacts with water to make iron harder
- zinc raises the electrode potential of iron
Show answer
Answer: B. Zinc has a more negative reduction potential than iron, so zinc is oxidised in preference and protects the iron even where the coating is scratched.
Sign in to keep track of the lessons you finish.