• Foundation
  • About 15 min
  • 5 practice questions

Conductance of electrolyte solutions

Calculate conductivity, cell constant and molar conductivity, explain how they change on dilution, and apply Kohlrausch's law.

If something looks wrong, please tell us.

A solution of salt conducts electricity because its ions move; pure water barely does. How well a solution conducts depends on how many ions it has and how fast they move. This lesson defines the quantities used to measure conduction and shows how they reveal the difference between strong and weak electrolytes.

Resistance, conductance and conductivity

For any conductor, resistance R = ρ × l / A, where l is length, A is cross-section area and ρ is resistivity. The conductance G = 1/R, measured in siemens (S). The conductivity κ (kappa) = 1/ρ is the conductance of a cube of solution with 1 cm sides; its unit is S cm^−1 (or S m^−1). Combining these, κ = G × (l/A).

The cell constant

In a conductivity cell, the electrodes have a fixed spacing l and area A, so l/A is a constant of the cell, called the cell constant G*, in cm^−1. Then κ = G* ÷ R, or G* = κ × R. To find G*, the cell is filled with a solution whose conductivity is already known and its resistance is measured.

Molar conductivity

Conductivity depends on concentration, so to compare electrolytes fairly we use molar conductivity: Λm = κ × 1000 ÷ C, where κ is in S cm^−1, C is in mol/L and Λm comes out in S cm^2 mol^−1. The factor 1000 converts litres to cubic centimetres. Λm is the conducting power of all the ions produced by one mole of electrolyte.

Effect of dilution

  • Conductivity κ decreases on dilution, because a cubic centimetre then holds fewer ions.
  • Molar conductivity Λm increases on dilution, because the ions are farther apart, pull on each other less and move more freely; a weak electrolyte also ionises more.
  • For a strong electrolyte such as KCl, Λm rises gently and almost linearly with the square root of concentration falling; extending the line to zero concentration gives the limiting molar conductivity Λ°m.
  • For a weak electrolyte such as acetic acid, Λm stays low and then rises very steeply at great dilution, so Λ°m cannot be found by extending the graph.

Kohlrausch's law

At infinite dilution every ion moves independently, so Λ°m of an electrolyte is the sum of contributions from its ions: Λ°m = ν+ λ°+ + ν− λ°−, where ν is the number of each ion in the formula. This lets us find Λ°m for a weak electrolyte from three strong ones.

Worked example 1: cell constant and conductivity

A cell filled with a solution of conductivity 0.0129 S cm^−1 shows a resistance of 100 Ω. G* = κ × R = 0.0129 × 100 = 1.29 cm^−1. The same cell filled with another solution reads 258 Ω, so that solution's κ = 1.29 ÷ 258 = 0.0050 S cm^−1.

Worked example 2: molar conductivity

A 0.05 M solution has κ = 0.0060 S cm^−1. Λm = 0.0060 × 1000 ÷ 0.05 = 120 S cm^2 mol^−1.

Worked example 3: Kohlrausch for acetic acid

Given Λ°m values in S cm^2 mol^−1: HCl 425.9, CH3COONa 91.0 and NaCl 126.4. Adding the first two and subtracting the third leaves exactly the H+ and CH3COO− contributions: Λ°m(CH3COOH) = 425.9 + 91.0 − 126.4 = 390.5 S cm^2 mol^−1.

κ = G* ÷ R; Λm = κ × 1000 ÷ C (S cm^2 mol^−1). On dilution κ falls and Λm rises. Kohlrausch: Λ°m = sum of the limiting ionic conductivities, each times its number in the formula.

Key takeaways: keep units consistent (S cm^−1 with mol/L and the factor 1000); the cell constant is found once with a standard solution; strong and weak electrolytes differ in how Λm changes on dilution; and Kohlrausch's law gives Λ°m of a weak electrolyte by adding and subtracting strong ones.

Check your understanding

  1. 1. The usual unit of molar conductivity in these calculations is

    1. S cm^−1
    2. S cm^2 mol^−1
    3. Ω cm
    4. S mol L^−1
    Show answer

    Answer: B. Λm = κ (S cm^−1) × 1000 (cm^3/L) ÷ C (mol/L), giving S cm^2 mol^−1.

  2. 2. When an electrolyte solution is diluted,

    1. κ increases and Λm decreases
    2. both κ and Λm decrease
    3. κ decreases and Λm increases
    4. both κ and Λm increase
    Show answer

    Answer: C. Fewer ions per cm^3 lowers κ, while the ions in one mole move more freely, so Λm rises.

  3. 3. A conductivity cell has cell constant 1.5 cm^−1 and the solution's resistance is 300 Ω. The conductivity is

    1. 450 S cm^−1
    2. 0.2 S cm^−1
    3. 0.05 S cm^−1
    4. 0.005 S cm^−1
    Show answer

    Answer: D. κ = G* ÷ R = 1.5 ÷ 300 = 0.005 S cm^−1.

  4. 4. A 0.02 M solution has κ = 0.002 S cm^−1. Its molar conductivity is

    1. 100 S cm^2 mol^−1
    2. 10 S cm^2 mol^−1
    3. 40 S cm^2 mol^−1
    4. 1000 S cm^2 mol^−1
    Show answer

    Answer: A. Λm = 0.002 × 1000 ÷ 0.02 = 2 ÷ 0.02 = 100 S cm^2 mol^−1.

  5. 5. Given λ°(Ca2+) = 119 and λ°(Cl−) = 76 S cm^2 mol^−1, Λ°m for CaCl2 is

    1. 195
    2. 271
    3. 314
    4. 157
    Show answer

    Answer: B. CaCl2 gives one Ca2+ and two Cl−: Λ°m = 119 + 2 × 76 = 271 S cm^2 mol^−1.

Privacy · Terms · Refunds · Delivery