• Foundation
  • About 14 min
  • 5 practice questions

Galvanic and electrolytic cells compared, and what electrolysis is used for

Compare galvanic and electrolytic cells, work out polarity and electrode names correctly, and describe electroplating, copper refining and the extraction of reactive metals.

If something looks wrong, please tell us.

A galvanic cell makes electricity from a chemical reaction. An electrolytic cell does the reverse: it uses electricity to force a chemical reaction. Students often mix up the two, especially the signs of the electrodes. This lesson puts them side by side and then shows three useful applications of electrolysis.

Side by side

Galvanic and electrolytic cells
FeatureGalvanic cellElectrolytic cell
Energy changeChemical to electricalElectrical to chemical
ReactionSpontaneousNon-spontaneous; driven by a battery
Anode (oxidation)NegativePositive
Cathode (reduction)PositiveNegative
ElectrodesUsually in separate containers joined by a salt bridgeUsually both in one container
ExampleDaniell cellElectroplating

Oxidation is always at the anode and reduction is always at the cathode. The signs change: in a galvanic cell the anode is negative, in an electrolytic cell it is positive.

— Rule to remember

In both kinds of cell, electrons flow through the wire from the anode to the cathode, and ions carry the current inside the solution. In an electrolytic cell, the anode is connected to the positive terminal of the battery, and the cathode to the negative terminal.

Electroplating

Electroplating is coating one metal with a thin layer of another using electrolysis. To plate a spoon with silver, the spoon is the cathode and a bar of silver is the anode. The electrolyte is a solution of a silver salt. At the cathode, silver ions gain electrons and form a layer of silver: Ag+ + e- gives Ag. At the anode, silver from the bar dissolves to replace the silver ions: Ag gives Ag+ + e-. The concentration of the electrolyte therefore stays almost constant.

Worked example 1: how much silver? A current of 0.50 A passes for 1930 s. How much silver is deposited? (Ag = 108; 1 mol of electrons carries 96,500 C.) Working: charge = 0.50 x 1930 = 965 C. Moles of electrons = 965 / 96,500 = 0.010 mol. One electron deposits one silver atom, so Ag = 0.010 mol = 0.010 x 108 = 1.08 g.

Refining copper

Copper from the furnace is impure. In the refining cell, a thick block of impure copper is the anode and a thin sheet of pure copper is the cathode, in a solution of copper sulphate with a little sulphuric acid. Copper dissolves from the anode as Cu2+ and is deposited as pure copper on the cathode. Less reactive impurities such as silver and gold fall to the bottom as anode mud, and they can be collected.

Worked example 2: choosing the connections. Which electrode is connected to the positive terminal in copper refining? Working: oxidation takes place at the anode, and the anode is connected to the positive terminal of the supply. The impure copper must dissolve, so it is the anode and is connected to the positive terminal.

Extracting reactive metals

Very reactive metals such as sodium, magnesium and aluminium cannot be obtained by heating their oxides with carbon. They are produced by passing electricity through their molten compounds. In molten sodium chloride, sodium forms at the cathode and chlorine at the anode. Aluminium is obtained by electrolysing aluminium oxide dissolved in molten cryolite, which lowers the temperature needed.

Worked example 3: polarity in electrolytic cells. In molten NaCl: (a) which electrode gets sodium, and (b) what is its sign? Working: sodium ions are positive and are reduced by gaining an electron, so the sodium forms at the cathode. In an electrolytic cell, the cathode is negative, which attracts the positive sodium ions. Chloride ions go to the positive anode and are oxidised to chlorine gas.

Key takeaways: galvanic cells produce electricity and electrolytic cells use it; anode means oxidation in both; plating uses the object as the cathode; refining uses impure metal as the anode; reactive metals are extracted from molten compounds.

Check your understanding

  1. 1. In an electrolytic cell, what is the sign of the anode?

    1. Negative
    2. Positive
    3. Neutral
    4. It changes all the time
    Show answer

    Answer: B. The anode is connected to the positive terminal of the battery, so it is positive.

  2. 2. In silver plating of a spoon, which electrode is the spoon?

    1. Anode
    2. Salt bridge
    3. Electrolyte
    4. Cathode
    Show answer

    Answer: D. The object to be plated is made the cathode, where silver ions are reduced.

  3. 3. In copper refining, what is the anode made of?

    1. Impure copper
    2. Pure copper
    3. Platinum
    4. Silver
    Show answer

    Answer: A. Impure copper dissolves at the anode, and pure copper deposits on the cathode.

  4. 4. How much silver is deposited by 965 C of charge? (Ag = 108; F = 96,500 C/mol)

    1. 0.54 g
    2. 2.16 g
    3. 10.8 g
    4. 1.08 g
    Show answer

    Answer: D. Moles of electrons = 965 / 96,500 = 0.010, so 0.010 mol Ag = 1.08 g.

  5. 5. How is aluminium extracted on a large scale?

    1. Heating the ore strongly with carbon
    2. Electrolysis of its oxide in cryolite
    3. Dissolving the ore in cold water
    4. Leaving the ore to rust in air
    Show answer

    Answer: B. Aluminium is too reactive to be reduced by carbon, so it is obtained by electrolysis of aluminium oxide dissolved in molten cryolite.

Privacy · Terms · Refunds · Delivery