• Foundation
  • About 13 min
  • 5 practice questions

Corrosion and rusting: why it happens and how to prevent it

Explain the conditions needed for rusting, interpret simple experiments with iron nails, and match prevention methods to situations.

If something looks wrong, please tell us.

An iron gate left outside turns reddish brown and flaky in a few months. This is rusting, the most familiar example of corrosion. Corrosion is the slow destruction of a metal by the action of air, moisture or chemicals on its surface. It costs a great deal each year, since bridges, ships, pipes and vehicles must be repaired or replaced.

What is needed for iron to rust?

Iron rusts only when it is in contact with both oxygen (air) and water. Rust is mainly hydrated iron(III) oxide, written Fe2O3.xH2O. We can show this with three test tubes, each with a clean iron nail.

Three-test-tube experiment
TubeConditionsDoes the nail rust?
1Dry air (a drying agent such as calcium chloride is used to take away moisture)No
2Boiled water (which has no dissolved air) with a layer of oil on topNo
3Ordinary tap water, open to the airYes

In tube 1, there is air but no water. In tube 2, there is water but no air. Only in tube 3 are both present. Rusting is faster in salt water, which is why ships and coastal buildings suffer badly, and in acidic air.

Iron + oxygen + water gives rust. Remove any one of them and rusting stops.

— Rule to remember

Other metals

  • Aluminium forms a thin, tough layer of aluminium oxide on its surface, which protects the metal underneath from further attack.
  • Copper slowly becomes covered with a green coating when left in damp air.
  • Silver turns dull and black in air containing sulphur compounds, because silver sulphide forms. This is called tarnishing.

Unlike the oxide on aluminium, rust is flaky and porous. It falls off and exposes new iron, so rusting keeps going until the iron is eaten away.

Preventing rust

Methods of preventing rusting
MethodHow it worksExample
Painting or oilingKeeps air and water awayGates, bicycle chains
GalvanisingCoats iron with zinc, which protects even when scratchedBuckets, roofing sheets
Tin platingCoating of tin keeps out air and waterFood cans
AlloyingMixing iron with chromium and nickel gives stainless steelCutlery, sinks
Sacrificial metalA more reactive metal such as magnesium is joined to the iron and corrodes insteadShip hulls, buried pipes

Worked example 1: reading the nail experiment. A nail is kept in a tube with oil poured over boiled water. After a week it is clean. Working: boiling removes dissolved air, and the oil layer prevents fresh air from dissolving. Without oxygen there is no rusting, even though water is present.

Worked example 2: choosing a method. What is best for (a) the iron railing of a bridge, (b) a bucket to carry water, and (c) a knife blade? Working: (a) painting, which is cheap and easy to repeat on a large surface; (b) galvanising, because the zinc layer is long lasting and protects even if scratched; (c) stainless steel, since it must stay shiny and clean.

Worked example 3: why does iron rust faster near the sea? Salt in the moist air and spray makes the water a better conductor, which speeds up the electrochemical reactions that make rust. Salty sea air therefore makes iron rust faster than clean, dry air.

Rancidity and corrosion are different

Do not confuse rusting with the spoiling of fats and oils. Rancidity is the oxidation of fats in food, which gives a bad smell and taste. Corrosion is a change in metals. Both involve oxygen, but they are different processes.

Key takeaways: rusting needs oxygen and water; salt speeds it up; aluminium protects itself but iron does not; paint, oil, zinc, tin, alloying and sacrificial metals are the main protections.

Check your understanding

  1. 1. What two things are needed for iron to rust?

    1. Oxygen and water
    2. Carbon dioxide and heat
    3. Nitrogen and oil
    4. Light and salt only
    Show answer

    Answer: A. Both oxygen (air) and water are required. Take either away and the iron stays rust-free.

  2. 2. What is the chemical name of rust?

    1. Zinc oxide and carbon
    2. Iron sulphide crystals
    3. Hydrated iron(III) oxide
    4. Basic copper carbonate
    Show answer

    Answer: C. Rust is mainly hydrated iron(III) oxide, Fe2O3.xH2O.

  3. 3. What is the zinc coating on iron called?

    1. Plating with tin
    2. Alloying
    3. Painting
    4. Galvanising
    Show answer

    Answer: D. Coating iron with zinc is called galvanising.

  4. 4. Why does aluminium not corrode quickly in air?

    1. It does not react with oxygen at all
    2. It has a thin protective layer of oxide
    3. It is heavier than iron
    4. It is stored in oil
    Show answer

    Answer: B. Aluminium forms a thin, tough layer of oxide that protects the metal underneath.

  5. 5. What is the black coating on silver left in air?

    1. Rust
    2. Silver sulphide
    3. Silver oxide only
    4. Zinc oxide
    Show answer

    Answer: B. Silver reacts with sulphur compounds in air to form silver sulphide, called tarnish.

Privacy · Terms · Refunds · Delivery