- Foundation
- About 14 min
- 5 practice questions
Electrode potentials and the electrochemical series
Use standard reduction potentials to calculate a cell's voltage, predict which way a reaction goes and compare oxidising and reducing agents.
If something looks wrong, please tell us.
Why does zinc push electrons to copper and not the other way round? Each electrode has its own tendency to gain electrons, measured as an electrode potential. Once you have a table of these values, you can work out the voltage of any cell and predict whether a metal will displace another from solution, without doing the experiment.
The standard hydrogen electrode
A single electrode potential cannot be measured on its own, because a voltmeter needs two electrodes. So chemists chose a reference: the standard hydrogen electrode (SHE), a platinum electrode in 1 M H+ with hydrogen gas at 1 bar, whose potential is defined as exactly 0.00 V. Every other electrode is paired with it, and the measured voltage becomes that electrode's standard electrode potential, E°.
Standard reduction potentials
By convention, E° values are written for the reduction half-reaction. A more positive E° means a stronger tendency to gain electrons, so the oxidised form is a stronger oxidising agent. A more negative E° means the metal gives up electrons easily, so it is a strong reducing agent. Arranging electrodes in order of E° gives the electrochemical series.
| Half-reaction (reduction) | E° / V |
|---|---|
| Li+ + e− → Li | −3.05 |
| K+ + e− → K | −2.93 |
| Mg2+ + 2e− → Mg | −2.36 |
| Zn2+ + 2e− → Zn | −0.76 |
| Fe2+ + 2e− → Fe | −0.44 |
| 2H+ + 2e− → H2 | 0.00 |
| Cu2+ + 2e− → Cu | +0.34 |
| Ag+ + e− → Ag | +0.80 |
| Cl2 + 2e− → 2Cl− | +1.36 |
| F2 + 2e− → 2F− | +2.87 |
Reading the table: lithium, at the top, is the strongest reducing agent; fluorine, at the bottom, is the strongest oxidising agent. Metals with negative E° (such as zinc and iron) can release hydrogen from dilute acids; metals with positive E° (copper, silver) cannot.
Cell voltage
The standard EMF of a cell is E°cell = E°cathode − E°anode, using the reduction potentials of both electrodes as they appear in the table. The electrode with the higher E° becomes the cathode. If E°cell comes out positive, the reaction as written is spontaneous. One important point: E° does not change when you multiply a half-reaction by a number, because it is a voltage, not an amount.
Worked example 1: the Daniell cell
Copper has the higher E°, so it is the cathode. E°cell = E°(Cu2+/Cu) − E°(Zn2+/Zn) = 0.34 − (−0.76) = 1.10 V. This matches the measured voltage.
Worked example 2: a zinc–silver cell
For Zn + 2Ag+ → Zn2+ + 2Ag, silver (+0.80 V) is the cathode and zinc (−0.76 V) the anode. E°cell = 0.80 − (−0.76) = 1.56 V. Even though the silver half-reaction is doubled to balance electrons, its E° stays 0.80 V.
Worked example 3: predicting displacement
Will copper metal displace silver from silver nitrate solution? Write the reaction Cu + 2Ag+ → Cu2+ + 2Ag. Silver ions are reduced (cathode), copper is oxidised (anode). E° = 0.80 − 0.34 = +0.46 V, positive, so yes. Will copper release hydrogen from dilute hydrochloric acid? Cu + 2H+ → Cu2+ + H2: E° = 0.00 − 0.34 = −0.34 V, negative, so no. This is why copper vessels do not fizz with dilute acid but zinc does.
E°cell = E°cathode − E°anode (both as reduction potentials). Higher E° = cathode = stronger oxidising agent. Positive E°cell means the reaction is spontaneous. Never multiply E° by the coefficients.
Key takeaways: the SHE is the zero of the scale; positive E° means a good oxidising agent and negative E° a good reducing agent; a metal higher (more negative) in the series displaces one lower down; and the cell voltage is simply cathode minus anode.
Check your understanding
-
1. The standard electrode potential of the standard hydrogen electrode is
- +1.00 V
- −0.76 V
- 0.00 V
- +0.34 V
Show answer
Answer: C. The SHE is the reference electrode and its potential is defined as exactly 0.00 V.
-
2. Using E°(Mg2+/Mg) = −2.36 V and E°(Cu2+/Cu) = +0.34 V, the standard EMF of a Mg–Cu cell is
- 2.02 V
- 2.70 V
- −2.70 V
- 1.10 V
Show answer
Answer: B. Copper (higher E°) is the cathode. E°cell = 0.34 − (−2.36) = 2.70 V.
-
3. Which of these is the strongest oxidising agent?
- F2
- Cl2
- Ag+
- Cu2+
Show answer
Answer: A. F2 has the most positive reduction potential (+2.87 V), so it has the greatest tendency to gain electrons.
-
4. Can zinc metal displace iron from Fe2+ solution? (E° Zn2+/Zn = −0.76 V, Fe2+/Fe = −0.44 V)
- No, because E° for the reaction is −0.32 V
- Yes, because E° for the reaction is −1.20 V
- No, because iron is a metal
- Yes, because E° for the reaction is +0.32 V
Show answer
Answer: D. Zn + Fe2+ → Zn2+ + Fe: Fe2+ is reduced (cathode), Zn oxidised (anode). E° = −0.44 − (−0.76) = +0.32 V, positive, so the reaction happens.
-
5. Which of these is the strongest reducing agent?
- Ag
- Cu
- Li
- Zn
Show answer
Answer: C. Lithium has the most negative reduction potential (−3.05 V), so lithium metal loses electrons most readily.
Sign in to keep track of the lessons you finish.