- Foundation
- About 13 min
- 5 practice questions
Redox reactions and the galvanic cell
Understand oxidation and reduction as electron transfer, and see how a galvanic cell such as the Daniell cell turns a redox reaction into electric current.
If something looks wrong, please tell us.
Electrochemistry is the chemistry of electricity: chemical reactions that produce current, as in a torch battery, and current that drives reactions, as in electroplating. Both rest on one idea, the transfer of electrons from one substance to another. This lesson starts from that idea and builds the simplest device that uses it, the galvanic cell.
Oxidation and reduction
Oxidation is the loss of electrons; reduction is the gain of electrons. They always happen together, because electrons lost by one substance must be gained by another. Such a paired reaction is called a redox reaction. The substance that loses electrons is the reducing agent (it reduces the other); the substance that gains electrons is the oxidising agent.
Take zinc metal dipped in copper sulphate solution. Zinc slowly dissolves and reddish copper appears: Zn + Cu2+ → Zn2+ + Cu. Split it into two half-reactions. Oxidation: Zn → Zn2+ + 2e−. Reduction: Cu2+ + 2e− → Cu. Zinc is the reducing agent and Cu2+ is the oxidising agent. When the two touch directly, the energy is wasted as heat.
Separating the halves: the Daniell cell
In a galvanic (voltaic) cell the two half-reactions take place in separate containers, so the electrons are forced to travel through a wire, where they can do useful work. In the Daniell cell a zinc rod stands in zinc sulphate solution and a copper rod stands in copper sulphate solution. A wire joins the rods and a salt bridge joins the solutions.
- Anode: the electrode where oxidation happens. Here it is zinc, and in a galvanic cell it is the negative terminal.
- Cathode: the electrode where reduction happens. Here it is copper, the positive terminal.
- Electrons flow through the outer wire from anode to cathode (zinc to copper); conventional current is taken to flow the other way.
- Salt bridge: a U-tube of a salt such as KCl or KNO3 set in a jelly. Its ions move to keep both solutions electrically neutral and complete the circuit. Without it, current stops almost at once.
Under standard conditions (1 M solutions, 298 K) the Daniell cell gives 1.10 V. As it works, the zinc rod loses mass, the copper rod gains mass, and the concentration of Cu2+ falls while that of Zn2+ rises.
Writing a cell in short form
Chemists write cells in a standard notation: anode on the left, cathode on the right. A single vertical line marks a boundary between electrode and solution, and a double line marks the salt bridge. The Daniell cell is Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s).
Worked example 1
Write the cell for the reaction Fe + Cu2+ → Fe2+ + Cu. Step 1: find the change in each species. Iron goes from 0 to +2, so it loses electrons and is oxidised: the iron electrode is the anode. Step 2: Cu2+ gains electrons and is reduced: copper is the cathode. Step 3: write anode on the left: Fe(s) | Fe2+(aq) || Cu2+(aq) | Cu(s). Electrons flow through the wire from iron to copper.
Worked example 2
For Mg + 2Ag+ → Mg2+ + 2Ag, how many electrons move per magnesium atom, and which electrode gains mass? Magnesium goes from 0 to +2, so 2 electrons leave each Mg atom; each Ag+ takes one electron, which is why two Ag+ ions are needed. Magnesium is the anode and loses mass as Mg2+ goes into solution; silver is the cathode and gains mass as silver metal is deposited. The cell is Mg(s) | Mg2+(aq) || Ag+(aq) | Ag(s).
Oxidation is loss of electrons, reduction is gain. Anode = oxidation, cathode = reduction (memory aid: AN OX and RED CAT). In a galvanic cell electrons flow from anode to cathode through the wire.
Key takeaways: every redox reaction splits into an oxidation half and a reduction half; a galvanic cell keeps them apart so electrons flow through a wire; the salt bridge keeps the solutions neutral; and the cell notation puts the anode on the left.
Check your understanding
-
1. Oxidation is best described as
- gain of electrons
- loss of electrons
- gain of protons
- loss of oxygen
Show answer
Answer: B. Oxidation is the loss of electrons. In Zn → Zn2+ + 2e−, zinc is oxidised.
-
2. In a galvanic cell, the anode is the electrode where
- reduction occurs and it is positive
- oxidation occurs and it is positive
- oxidation occurs and it is negative
- reduction occurs and it is negative
Show answer
Answer: C. Oxidation always occurs at the anode. In a galvanic cell the anode releases electrons into the wire, so it is the negative terminal.
-
3. The main job of the salt bridge is to
- supply electrons to the cathode
- keep both solutions electrically neutral and complete the circuit
- raise the cell voltage
- stop the electrodes from dissolving
Show answer
Answer: B. Ions from the salt bridge move into each solution to balance the charge produced by the reactions, so current can keep flowing.
-
4. Which is the correct cell notation for Zn + 2Ag+ → Zn2+ + 2Ag?
- Ag(s) | Ag+(aq) || Zn2+(aq) | Zn(s)
- Zn2+(aq) | Zn(s) || Ag(s) | Ag+(aq)
- Zn(s) | Ag+(aq) || Zn2+(aq) | Ag(s)
- Zn(s) | Zn2+(aq) || Ag+(aq) | Ag(s)
Show answer
Answer: D. Zinc is oxidised, so it is the anode and goes on the left; silver ions are reduced at the cathode on the right.
-
5. In a working Daniell cell, electrons flow through the external wire
- from the zinc rod to the copper rod
- from the copper rod to the zinc rod
- through the salt bridge
- in both directions in turn
Show answer
Answer: A. Zinc is oxidised and releases electrons, which travel through the wire to copper, where Cu2+ is reduced. Electrons never pass through the salt bridge; ions carry the charge there.
Sign in to keep track of the lessons you finish.