• Foundation
  • About 14 min
  • 5 practice questions

The Nernst equation and Gibbs energy

Calculate how a cell's voltage changes with concentration using the Nernst equation, and link cell voltage to Gibbs energy.

If something looks wrong, please tell us.

Standard potentials assume every solution is exactly 1 M. Real cells rarely are, and as a battery runs its concentrations change and its voltage slowly drops. The Nernst equation tells you the voltage at any concentration. The same lesson links voltage to Gibbs energy, the quantity that decides whether a reaction can happen at all.

The Nernst equation

For a cell reaction that transfers n electrons, at 298 K: E = E° − (0.059/n) log Q. Q is the reaction quotient, written like an equilibrium expression: concentrations of products over reactants, each raised to its coefficient, leaving out pure solids such as metal electrodes. The factor 0.059 V comes from 2.303RT/F at 298 K.

For the Daniell cell, Zn + Cu2+ → Zn2+ + Cu with n = 2, Q = [Zn2+]/[Cu2+]. So E = 1.10 − 0.0295 log([Zn2+]/[Cu2+]). If the copper ion concentration is high, Q is small and the voltage rises above 1.10 V; as the cell runs, Cu2+ is used up, Q grows and the voltage falls.

Worked example 1

Find the EMF of a Daniell cell with [Zn2+] = 0.1 M and [Cu2+] = 1.0 M. Q = 0.1 ÷ 1.0 = 0.1, so log Q = −1. E = 1.10 − (0.059/2)(−1) = 1.10 + 0.0295 = 1.13 V.

Worked example 2

Now [Zn2+] = 1.0 M and [Cu2+] = 0.01 M. Q = 1.0 ÷ 0.01 = 100, log Q = 2. E = 1.10 − 0.0295 × 2 = 1.10 − 0.059 = 1.041 V, about 1.04 V. Lower copper concentration means lower voltage.

A single electrode

The same equation works for one electrode written as a reduction. For Ag+ + e− → Ag, Q = 1/[Ag+], so E = 0.80 − 0.059 log(1/[Ag+]). With [Ag+] = 0.01 M, log(100) = 2, and E = 0.80 − 0.118 = 0.682 V.

Cell voltage and Gibbs energy

The electrical work a cell can do equals the drop in Gibbs energy: ΔG = −nFE, and under standard conditions ΔG° = −nFE°. F is the Faraday constant, 96 500 C per mole of electrons. A positive E gives a negative ΔG, so the reaction is spontaneous; a negative E means the reaction will not go by itself.

Worked example 3

For the Daniell cell, n = 2 and E° = 1.10 V. ΔG° = −2 × 96 500 × 1.10 = −212 300 J/mol = −212.3 kJ/mol. The large negative value confirms that zinc reduces copper ions strongly.

When the cell is flat

As a cell runs, Q keeps rising until E falls to zero. At that point ΔG = 0, the reaction is at equilibrium and no more current flows: the battery is dead. So a dead cell is not one that has run out of all its chemicals, but one whose reaction has reached equilibrium.

Nernst at 298 K: E = E° − (0.059/n) log Q. Gibbs energy: ΔG° = −nFE°, with F = 96 500 C/mol. Positive E means negative ΔG and a spontaneous reaction; E = 0 means equilibrium.

Key takeaways: write Q exactly as for an equilibrium, without the solid electrodes; remember the 0.059/n factor; more reactant ions raise E and more product ions lower it; and convert voltage to energy with ΔG = −nFE, keeping track of joules versus kilojoules.

Check your understanding

  1. 1. For a reaction with n = 1 and E° = 1.00 V, ΔG° is (F = 96 500 C/mol)

    1. +96.5 kJ/mol
    2. −193 kJ/mol
    3. −9.65 kJ/mol
    4. −96.5 kJ/mol
    Show answer

    Answer: D. ΔG° = −nFE° = −1 × 96 500 × 1.00 = −96 500 J/mol = −96.5 kJ/mol.

  2. 2. If a cell has a positive standard EMF, then ΔG° for its reaction is

    1. negative, so the reaction is spontaneous
    2. positive, so the reaction is spontaneous
    3. zero
    4. positive, so the reaction is not spontaneous
    Show answer

    Answer: A. ΔG° = −nFE°. A positive E° makes ΔG° negative, which means the reaction is spontaneous.

  3. 3. A Daniell cell has [Zn2+] = 0.01 M and [Cu2+] = 1.0 M (E° = 1.10 V). Its EMF is about

    1. 1.04 V
    2. 1.10 V
    3. 1.16 V
    4. 1.22 V
    Show answer

    Answer: C. Q = 0.01 ÷ 1.0 = 0.01, log Q = −2. E = 1.10 − 0.0295 × (−2) = 1.10 + 0.059 = 1.159 V, about 1.16 V.

  4. 4. The potential of a silver electrode (Ag+ + e− → Ag, E° = 0.80 V) in 0.01 M Ag+ at 298 K is

    1. 0.918 V
    2. 0.682 V
    3. 0.741 V
    4. 0.800 V
    Show answer

    Answer: B. E = 0.80 − 0.059 log(1/0.01) = 0.80 − 0.059 × 2 = 0.80 − 0.118 = 0.682 V.

  5. 5. When a galvanic cell has run until its reaction reaches equilibrium, its EMF is

    1. equal to E°
    2. twice E°
    3. zero
    4. negative
    Show answer

    Answer: C. At equilibrium ΔG = 0, and since ΔG = −nFE, E = 0. The cell can no longer drive a current.

Sign in to keep track of the lessons you finish.

Next lesson → Conductance of electrolyte solutions

Privacy · Terms · Refunds · Delivery