• Practice
  • About 15 min
  • 5 practice questions

Batteries, fuel cells and corrosion: reactions, matching and quick numbers

Answer exam-style questions on the reactions of common cells, on primary and secondary types, on corrosion and its prevention, and on simple amount-of-substance calculations for cells.

If something looks wrong, please tell us.

Questions on batteries and corrosion are usually of three kinds: write or recognise an electrode reaction, match a cell to its type or use, or do a short calculation from current and time. A table of the reactions that you must know, and a clear quick method for the numbers, will cover most of them.

Reactions to know

Common cells and their reactions
CellTypeKey reactions
Dry (Leclanche) cellPrimaryAnode: Zn gives Zn2+ + 2e-. Cathode: MnO2 + NH4+ + e- gives MnO(OH) + NH3
Mercury cellPrimaryZn(Hg) + HgO gives ZnO + Hg (constant voltage)
Lead storage batterySecondaryPb + PbO2 + 2H2SO4 gives 2PbSO4 + 2H2O on discharge
Nickel-cadmium cellSecondaryCd + 2NiO(OH) + 2H2O gives Cd(OH)2 + 2Ni(OH)2 on discharge
Hydrogen-oxygen fuel cellFuel cellAnode: 2H2 + 4OH- gives 4H2O + 4e-. Cathode: O2 + 2H2O + 4e- gives 4OH-

Discharging lead battery: Pb is oxidised at the anode, PbO2 is reduced at the cathode, both end as PbSO4, and H2SO4 is used up.

— Rule to remember

Corrosion: points that are asked

  • Rusting needs oxygen and water; the process is electrochemical, with iron as the anode.
  • The overall change is Fe going to Fe2+, which is further oxidised to rust, Fe2O3.xH2O.
  • Zinc coating (galvanising) protects even when scratched, because zinc is more active than iron and corrodes first (sacrificial protection).
  • Tin coating protects only while it is unbroken; if scratched, iron rusts faster than uncoated iron.
  • Stainless steel resists rusting because of its alloy of chromium and nickel.

Quick numbers

All the calculations follow one chain: charge Q = I x t in coulombs; moles of electrons = Q / 96,500; then use the ratio from the electrode equation.

Worked example 1: acid used in a lead battery. A lead battery supplies 2.0 A for 80 minutes. How much H2SO4 is consumed? Working: t = 80 x 60 = 4800 s. Q = 2.0 x 4800 = 9600 C. Moles of electrons = 9600 / 96,500 = 0.0995. The overall reaction uses 2 mol of H2SO4 for 2 mol of electrons, so 1 mol of H2SO4 per mole of electrons. Mass = 0.0995 x 98 = 9.75 g.

Worked example 2: zinc used in a dry cell. A dry cell gives 0.50 A for 1.0 hour. What mass of zinc is used? (Zn = 65) Working: Q = 0.50 x 3600 = 1800 C. Moles of electrons = 1800 / 96,500 = 0.01865. Zn gives 2 electrons per atom, so Zn = 0.00933 mol and the mass = 0.00933 x 65 = 0.606 g.

Worked example 3: capacity and time. A cell is rated 4.5 Ah. For how long can it supply 0.50 A, in the ideal case? Working: time = capacity / current = 4.5 / 0.50 = 9 hours. Real cells give a little less at a heavy drain.

Worked example 4: which coating? Given E° (V): Zn2+/Zn -0.76, Fe2+/Fe -0.44, Sn2+/Sn -0.14, Cu2+/Cu +0.34. Which coating on iron protects it after being scratched? Working: a coating protects iron by sacrifice when its E° is lower (more negative) than that of iron. Only zinc (-0.76) qualifies. With tin or copper, iron would be the anode and would corrode faster.

Traps

  • Calling a lead battery a primary cell. It can be recharged, so it is secondary.
  • Saying that a fuel cell stores energy. It converts the energy of fuel that is supplied from outside.
  • Taking 2 electrons for every mole of H2SO4 in a lead battery. The ratio is 1 : 1.

Key takeaways: learn the reaction table; apply the Q = I t chain for numbers; remember sacrificial protection depends on a lower E° than iron.

Check your understanding

  1. 1. Which of these is a secondary cell?

    1. Dry cell
    2. Mercury cell
    3. Nickel-cadmium cell
    4. Button cell in a watch
    Show answer

    Answer: C. The nickel-cadmium cell can be recharged. The other three are primary cells.

  2. 2. What is the anode reaction in a dry cell?

    1. Zn gives Zn2+ + 2e-
    2. MnO2 gains an electron
    3. Pb gives PbSO4
    4. H2 gives 2H+
    Show answer

    Answer: A. Zinc is oxidised at the anode. The reduction of MnO2 takes place at the cathode.

  3. 3. A current of 2.0 A flows for 4800 s. How many moles of electrons pass (F = 96,500 C/mol)?

    1. 0.0100
    2. 0.995
    3. 0.199
    4. 0.0995
    Show answer

    Answer: D. Q = 9600 C and 9600 / 96,500 = 0.0995 mol.

  4. 4. Which metal coating protects iron after it is scratched?

    1. Tin
    2. Copper
    3. Zinc
    4. Silver
    Show answer

    Answer: C. Zinc has a more negative E° than iron and corrodes in preference to it. Tin, copper and silver are less active than iron.

  5. 5. A 4.5 Ah cell supplies 0.50 A. For how long can it ideally do so?

    1. 2.25 h
    2. 4.5 h
    3. 9 h
    4. 18 h
    Show answer

    Answer: C. Time = 4.5 / 0.50 = 9 hours.

Privacy · Terms · Refunds · Delivery