• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Electrochemistry practice

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions on paper before opening any explanation. They are harder than the lesson checks and mix the routines of the whole course, so time yourself: about a minute per question is a good exam pace. Take F = 96500 C mol⁻¹ and 0.059 V for 2.303RT/F at 298 K throughout.

Final self-assessment

  1. 1. Three half-cells have E°: A2+/A = −0.50 V, B2+/B = +0.20 V and C2+/C = −1.20 V. Which pair gives the highest E°cell, and what is it?

    1. A and B, 0.70 V
    2. C and B, 1.40 V
    3. C and A, 0.70 V
    4. A and B, −0.30 V
    Show answer

    Answer: B. The largest gap is between the most negative (C, −1.20) and the most positive (B, +0.20). With B as cathode: E° = 0.20 − (−1.20) = 1.40 V.

  2. 2. Taking E°: Mg −2.37, Zn −0.76, Fe −0.44 and Ag +0.80 V, which metal will NOT liberate hydrogen from dilute HCl?

    1. Mg
    2. Zn
    3. Ag
    4. Fe
    Show answer

    Answer: C. With H+ as cathode (0.00 V), E°cell = 0 − E°(metal). Only Ag gives a negative value (−0.80 V), so it cannot displace hydrogen.

  3. 3. For the cell Pt | H2(1 bar) | H+(1 M) || Ag+(1 M) | Ag with E°(Ag+/Ag) = +0.80 V, which statement is correct?

    1. H2 is oxidised at the anode and E°cell = 0.80 V
    2. Ag is oxidised at the anode and E°cell = 0.80 V
    3. H+ is reduced at the cathode and E°cell = −0.80 V
    4. Ag+ is reduced at the anode and E°cell = 1.60 V
    Show answer

    Answer: A. The left electrode is the anode: H2 → 2H+ + 2e⁻. Ag+ is reduced at the cathode. E°cell = 0.80 − 0.00 = 0.80 V.

  4. 4. For Zn | Zn2+(0.01 M) || Ag+(0.1 M) | Ag with E°cell = 1.56 V at 298 K, the cell potential is:

    1. 1.53 V
    2. 1.59 V
    3. 1.56 V
    4. 1.50 V
    Show answer

    Answer: C. Zn + 2Ag+ → Zn2+ + 2Ag, n = 2. Q = [Zn2+]/[Ag+]² = 0.01/(0.1)² = 1, log Q = 0, so E = E° = 1.56 V. Forgetting the square gives Q = 0.1 and the wrong 1.59 V.

  5. 5. A hydrogen electrode (H2 at 1 bar) shows a potential of −0.236 V at 298 K. The pH of its solution is:

    1. 2
    2. 6
    3. 0.236
    4. 4
    Show answer

    Answer: D. E = −0.059 pH, so pH = 0.236/0.059 = 4.

  6. 6. A two-electron cell has E° = 0.59 V and measures 0.531 V at 298 K. The reaction quotient Q is:

    1. 100
    2. 10
    3. 0.01
    4. 1000
    Show answer

    Answer: A. E° − E = 0.059 = (0.059/2) log Q, so log Q = 2 and Q = 100.

  7. 7. A two-electron reaction has K = 10²⁰ at 298 K. Its E°cell is:

    1. 1.18 V
    2. 0.059 V
    3. 0.59 V
    4. 0.295 V
    Show answer

    Answer: C. E° = (0.059/n) log K = (0.059/2) × 20 = 0.59 V.

  8. 8. A two-electron cell reaction has ΔG° = −193 kJ mol⁻¹. Its E°cell is:

    1. 2.0 V
    2. 1.0 V
    3. 0.5 V
    4. −1.0 V
    Show answer

    Answer: B. E° = −ΔG°/(nF) = 193000/(2 × 96500) = 1.0 V.

  9. 9. Given E°(Fe3+/Fe2+) = +0.77 V and E°(Fe2+/Fe) = −0.44 V, E°(Fe3+/Fe) is about:

    1. −0.037 V
    2. 0.33 V
    3. 1.21 V
    4. 0.11 V
    Show answer

    Answer: A. Add Gibbs energies: n E° = 1(0.77) + 2(−0.44) = −0.11, so E°(Fe3+/Fe) = −0.11/3 = −0.037 V. 0.33 V is the wrong plain sum.

  10. 10. Given Λ°(NH4Cl) = 150, Λ°(NaOH) = 250 and Λ°(NaCl) = 125 S cm² mol⁻¹, Λ°(NH4OH) is:

    1. 525
    2. 275
    3. 25
    4. 400
    Show answer

    Answer: B. Λ°(NH4OH) = Λ°(NH4Cl) + Λ°(NaOH) − Λ°(NaCl) = 150 + 250 − 125 = 275 S cm² mol⁻¹.

  11. 11. A 0.05 M solution in a cell of constant 1.0 cm⁻¹ shows a resistance of 50 Ω. Its molar conductivity is:

    1. 40 S cm² mol⁻¹
    2. 4000 S cm² mol⁻¹
    3. 1000 S cm² mol⁻¹
    4. 400 S cm² mol⁻¹
    Show answer

    Answer: D. κ = 1.0/50 = 0.02 S cm⁻¹. Λm = 1000 × 0.02/0.05 = 400 S cm² mol⁻¹.

  12. 12. A 0.001 M weak monobasic acid is 20% dissociated. Its Ka is:

    1. 4 × 10⁻⁵
    2. 5 × 10⁻⁵
    3. 2 × 10⁻⁴
    4. 8 × 10⁻⁶
    Show answer

    Answer: B. Ka = cα²/(1 − α) = 0.001 × 0.04/0.8 = 5 × 10⁻⁵. Using cα² alone gives 4 × 10⁻⁵, which is too rough when α = 0.2.

  13. 13. How long must a current of 9.65 A flow to deposit 3.175 g of copper from CuSO4 (Cu = 63.5)?

    1. 500 s
    2. 2000 s
    3. 1000 s
    4. 100 s
    Show answer

    Answer: C. Moles of Cu = 3.175/63.5 = 0.05; electrons = 0.1 mol; Q = 9650 C; t = 9650/9.65 = 1000 s.

  14. 14. Aqueous CuSO4 is electrolysed with copper electrodes. Which statement is correct?

    1. Copper dissolves at the anode, copper deposits at the cathode and [Cu2+] stays about the same
    2. Oxygen forms at the anode and [Cu2+] falls
    3. Hydrogen forms at the cathode
    4. Sulphur dioxide forms at the anode
    Show answer

    Answer: A. A copper anode is oxidised more easily than water: Cu → Cu2+ + 2e⁻. The same amount of Cu2+ is reduced at the cathode, so the concentration is unchanged.

  15. 15. An AgNO3 cell and a molten Al2O3 cell are in series. When 10.8 g of silver is deposited, the mass of aluminium formed (Al = 27) is:

    1. 2.7 g
    2. 1.8 g
    3. 0.3 g
    4. 0.9 g
    Show answer

    Answer: D. 10.8 g Ag = 0.1 mol, so 0.1 mol of electrons. Al needs 3 each: 0.1/3 mol × 27 = 0.9 g.

Revisit the matching lesson for any question you missed: questions 1-3 come from lesson 1 (galvanic cells and E°cell), 4-6 from lesson 2 (the Nernst equation), 7-9 from lesson 3 (Gibbs energy, K and combining potentials), 10-12 from lesson 4 (conductance and Kohlrausch's law) and 13-15 from lesson 5 (electrolysis and Faraday's laws).

Privacy · Terms · Refunds · Delivery