• Practice
  • About 16 min
  • 5 practice questions

Electrolysis and Faraday's laws

Use Q = It and Faraday's laws to find masses, times and gas amounts in electrolysis, and predict the products at each electrode.

If something looks wrong, please tell us.

Electrolysis runs the galvanic idea in reverse: an external source forces a non-spontaneous reaction. Numericals here are short chains of unit conversions, and theory questions ask which product forms at which electrode. Both reward a fixed routine.

Electrolytic cell basics

In an electrolytic cell the anode is connected to the positive terminal of the supply and the cathode to the negative terminal. Oxidation still happens at the anode and reduction at the cathode; only the signs of the electrodes are reversed compared with a galvanic cell.

Faraday's laws as one formula

First law: the mass of substance changed is proportional to the charge passed. Second law: for the same charge, masses of different substances are proportional to their molar mass divided by the electrons needed per ion (M/n). One mole of electrons carries one faraday, about 96500 C. Combining these:

Charge Q = I × t; moles of electrons = Q/96500; moles of product = moles of electrons / n; mass = moles × molar mass.

— Rule to remember

Worked example 1: copper plating

A current of 2 A is passed for 965 s through CuSO4 solution. Q = 2 × 965 = 1930 C. Moles of electrons = 1930/96500 = 0.02. Cu2+ + 2e⁻ → Cu, so moles of Cu = 0.02/2 = 0.01. Mass = 0.01 × 63.5 = 0.635 g.

Worked example 2: cells in series

AgNO3 and CuSO4 cells are connected in series, so the same charge flows through both. If 1.08 g of silver is deposited, moles of Ag = 1.08/108 = 0.01, so 0.01 mol of electrons passed. Copper deposited = 0.01/2 = 0.005 mol = 0.005 × 63.5 = 0.3175 g. Quick check with the second law: mass ratio Cu : Ag = (63.5/2) : (108/1) = 31.75 : 108.

Worked example 3: time needed

How long must 10 A flow to deposit 2.7 g of aluminium from molten alumina? Moles of Al = 2.7/27 = 0.1. Al3+ + 3e⁻ → Al, so electrons = 0.3 mol and Q = 0.3 × 96500 = 28950 C. Time = 28950/10 = 2895 s, about 48 minutes.

Which product forms?

Electrolyte (inert electrodes unless stated)CathodeAnode
Molten NaClNa metalCl2
Aqueous NaCl (concentrated)H2Cl2
Dilute H2SO4H2O2
Aqueous CuSO4, platinum electrodesCuO2
Aqueous CuSO4, copper electrodesCu depositsCu dissolves

In water, ions of very reactive metals (Na+, K+) are not reduced; water is reduced to H2 instead. At the anode of concentrated chloride solutions Cl2 forms rather than O2 because oxygen evolution needs an extra overpotential. With copper electrodes in CuSO4 the anode itself dissolves, so the Cu2+ concentration stays the same; this is the basis of copper refining.

  • Trap: using n = 1 for every ion. Use the charge on the ion: 2 for Cu2+, 3 for Al3+.
  • Trap: time in minutes or hours left unconverted; Q = It needs seconds.
  • For water electrolysis, 1 F gives 0.5 mol H2 at the cathode and 0.25 mol O2 at the anode.

Key takeaways: Q = It; moles of electrons = Q/F; divide by the ion's charge for moles of product; same charge through series cells means equal moles of electrons; and in water, reactive metal ions leave H2 at the cathode.

Check your understanding

  1. 1. How much charge is needed to deposit 1 mol of aluminium from Al3+?

    1. 96500 C
    2. 193000 C
    3. 289500 C
    4. 32167 C
    Show answer

    Answer: C. Al3+ + 3e⁻ → Al needs 3 mol of electrons = 3 × 96500 = 289500 C.

  2. 2. A current of 5 A flows for 1930 s through AgNO3 solution. The mass of silver deposited (Ag = 108) is:

    1. 10.8 g
    2. 5.4 g
    3. 21.6 g
    4. 1.08 g
    Show answer

    Answer: A. Q = 5 × 1930 = 9650 C = 0.1 mol of electrons. Ag+ + e⁻ → Ag, so 0.1 mol Ag = 10.8 g.

  3. 3. During electrolysis of concentrated aqueous NaCl with inert electrodes, the product at the cathode is:

    1. Sodium metal
    2. Oxygen
    3. Chlorine
    4. Hydrogen
    Show answer

    Answer: D. Na+ is very hard to reduce in water; water is reduced instead: 2H2O + 2e⁻ → H2 + 2OH⁻. Chlorine forms at the anode.

  4. 4. A certain charge deposits 0.635 g of copper from Cu2+. The same charge would deposit how much silver from Ag+?

    1. 1.08 g
    2. 2.16 g
    3. 0.54 g
    4. 4.32 g
    Show answer

    Answer: B. Moles of Cu = 0.635/63.5 = 0.01, so electrons = 0.02 mol. Ag needs 1 electron each: 0.02 mol × 108 = 2.16 g.

  5. 5. When 0.4 F of charge is passed through dilute H2SO4, how many moles of O2 form at the anode?

    1. 0.4 mol
    2. 0.2 mol
    3. 0.1 mol
    4. 0.05 mol
    Show answer

    Answer: C. 2H2O → O2 + 4H+ + 4e⁻: 4 mol of electrons per mol of O2. 0.4/4 = 0.1 mol O2.

Privacy · Terms · Refunds · Delivery