- Practice
- About 15 min
- 5 practice questions
Galvanic cells, cell notation and E°cell
Read cell notation correctly, find E°cell from two electrode potentials, and decide quickly which reaction or displacement is spontaneous.
If something looks wrong, please tell us.
Almost every electrochemistry question starts with a galvanic cell: two half-cells, a salt bridge and a wire. If you can read the cell notation and turn two standard electrode potentials into E°cell without a sign slip, you have already solved the first step of most numerical problems. This lesson drills that step and the traps examiners build around it.
The parts of a galvanic cell
A galvanic (voltaic) cell turns the energy of a spontaneous redox reaction into electrical work. Oxidation happens at the anode, which releases electrons and is therefore the negative terminal. Reduction happens at the cathode, the positive terminal. Electrons flow through the external wire from anode to cathode. The salt bridge (often KCl or KNO3 in agar) lets ions move between the two solutions so that each stays electrically neutral; without it the current stops almost at once.
Cell notation writes the anode on the left and the cathode on the right: Zn | Zn2+(1 M) || Cu2+(1 M) | Cu. A single bar is a phase boundary, the double bar is the salt bridge. An inert electrode such as platinum is written at the outer end when the half-cell has no metal of its own, for example Pt | H2(1 bar) | H+(1 M).
Standard electrode potentials and E°cell
Every half-cell is measured against the standard hydrogen electrode (SHE), given 0.00 V. Tables list reduction potentials. A more positive value means the oxidised form is a stronger oxidising agent; a more negative value means the metal is a stronger reducing agent. The cell potential is then:
E°cell = E°cathode − E°anode, using reduction potentials for both. Never change the sign of a table value and never multiply it by the number of electrons: E° is an intensive property.
| Half-reaction (reduction) | E° / V (typical table value) |
|---|---|
| Mg2+ + 2e⁻ → Mg | −2.37 |
| Zn2+ + 2e⁻ → Zn | −0.76 |
| Fe2+ + 2e⁻ → Fe | −0.44 |
| Ni2+ + 2e⁻ → Ni | −0.25 |
| 2H+ + 2e⁻ → H2 | 0.00 |
| Cu2+ + 2e⁻ → Cu | +0.34 |
| Ag+ + e⁻ → Ag | +0.80 |
A reaction is spontaneous under standard conditions when its E°cell is positive. So the speed method for displacement questions is: the metal with the lower (more negative) E° pushes the ion of the higher one out of solution.
Worked example 1: a cell with unequal electrons
Find E°cell for Zn | Zn2+ || Ag+ | Ag. The cathode is Ag (+0.80 V) and the anode is Zn (−0.76 V). E°cell = 0.80 − (−0.76) = 1.56 V. The balanced reaction is Zn + 2Ag+ → Zn2+ + 2Ag, but the silver potential is not doubled. A common wrong option is 0.80 × 2 + 0.76 = 2.36 V; reject it.
Worked example 2: will the displacement happen?
(a) Will copper displace silver from AgNO3 solution? Copper would be oxidised (anode) and Ag+ reduced (cathode): E° = 0.80 − 0.34 = +0.46 V. Positive, so yes. (b) Will copper dissolve in 1 M HCl giving hydrogen? Now H+ is the cathode: E° = 0.00 − 0.34 = −0.34 V. Negative, so no. This is why metals below hydrogen in the series do not liberate H2 from dilute non-oxidising acids.
Worked example 3: ranking reducing agents
Arrange Mg, Zn, Cu and Ag in decreasing reducing power. Reducing power rises as E° becomes more negative: Mg (−2.37) > Zn (−0.76) > Cu (+0.34) > Ag (+0.80). For oxidising power of the ions the order simply reverses: Ag+ > Cu2+ > Zn2+ > Mg2+.
Traps to watch
- Reading the anode as the positive electrode: in a galvanic cell the anode is negative. (In an electrolytic cell the anode is positive - do not mix the two.)
- Adding the two table values without changing anything: that only works if you have first reversed the anode value, which is the same as subtracting.
- Multiplying E° by stoichiometric coefficients.
- Forgetting that the double bar means a salt bridge, not a phase boundary.
Key takeaways: anode = oxidation = negative in a galvanic cell; E°cell = E°cathode − E°anode with reduction potentials; a positive E°cell means the reaction as written is spontaneous; and E° never gets multiplied by coefficients.
Check your understanding
-
1. Taking E°(Mg2+/Mg) = −2.37 V and E°(Cu2+/Cu) = +0.34 V, what is E°cell for Mg | Mg2+ || Cu2+ | Cu?
- 2.03 V
- 2.71 V
- −2.71 V
- 5.42 V
Show answer
Answer: B. E°cell = E°cathode − E°anode = 0.34 − (−2.37) = 2.71 V. 2.03 V comes from wrongly subtracting the magnitudes; 5.42 V wrongly doubles.
-
2. In a galvanic cell, oxidation takes place at the:
- Cathode, which is the positive electrode
- Anode, which is the positive electrode
- Anode, which is the negative electrode
- Cathode, which is the negative electrode
Show answer
Answer: C. Oxidation always occurs at the anode. In a galvanic cell the anode releases electrons into the wire, so it is the negative terminal.
-
3. What is the main job of the salt bridge in a galvanic cell?
- To keep both solutions electrically neutral and complete the internal circuit
- To supply electrons to the cathode
- To stop any ions from moving between the half-cells
- To raise the cell's standard potential
Show answer
Answer: A. Ions from the salt bridge move into each half-cell to balance the charge created by oxidation and reduction. Electrons travel only through the external wire.
-
4. Given E°(Fe2+/Fe) = −0.44 V and E°(Ni2+/Ni) = −0.25 V, which reaction is spontaneous under standard conditions?
- Ni + Fe2+ → Ni2+ + Fe
- Fe2+ + Ni2+ → Fe + Ni
- Ni2+ + 2e⁻ → Ni alone, with no partner
- Fe + Ni2+ → Fe2+ + Ni
Show answer
Answer: D. Fe has the more negative E°, so Fe is oxidised and Ni2+ reduced. E°cell = −0.25 − (−0.44) = +0.19 V, positive, so Fe + Ni2+ → Fe2+ + Ni is spontaneous. The reverse would give −0.19 V.
-
5. Using E° values Ag+/Ag +0.80, Cu2+/Cu +0.34, Zn2+/Zn −0.76 and Mg2+/Mg −2.37 V, which ion is the strongest oxidising agent?
- Cu2+
- Ag+
- Zn2+
- Mg2+
Show answer
Answer: B. The strongest oxidising agent is the ion most easily reduced, i.e. with the most positive reduction potential: Ag+ at +0.80 V.
Sign in to keep track of the lessons you finish.