• Practice
  • About 16 min
  • 5 practice questions

Mixed electrochemistry set: choosing the right formula under pressure

Practise recognising which relation a question needs, among E°cell, Nernst, Gibbs energy, equilibrium constant, conductivity and Faraday's laws, and solve a mixed set quickly.

If something looks wrong, please tell us.

In the exam the difficulty is rarely in a formula; it is in choosing the right one. A question gives a few numbers and a few words, and the words tell you which relation to use. This lesson gives a decision table and a mixed set of solved problems drawn from the whole course.

The decision table

Which formula?
If the question says...Use...
Standard cell, two electrode potentials, E°cellE°cell = E°cathode - E°anode
Concentrations other than 1 M, or pHNernst: E = E° - (0.059 / n) log Q
Work, spontaneity, free energydelta G = -nFE
Equilibrium constant from potentialslog K = nE° / 0.059
Resistance, cell constant, conductivitykappa = cell constant / R; Lambda m = 1000 kappa / M
Weak electrolyte, degree of dissociationalpha = Lambda m / Lambda m at infinite dilution
Current, time, mass, volume of gasQ = I t; moles = Q / (n x 96,500)

Read the words first: 'standard' means E°; 'concentration' means Nernst; 'spontaneous' means delta G; 'current and time' means Faraday.

— Rule to remember

Worked example 1: Nernst. Zn | Zn2+ (0.01 M) || Cu2+ (1.0 M) | Cu, with E°cell = 1.10 V. Working: n = 2 and Q = [Zn2+] / [Cu2+] = 0.01 / 1.0 = 0.01. E = 1.10 - (0.059 / 2) x log 0.01 = 1.10 - 0.0295 x (-2) = 1.10 + 0.059 = 1.159 V.

Worked example 2: Gibbs energy. For the same reaction under standard conditions, delta G° = -nFE° = -2 x 96,500 x 1.10 = -212,300 J = -212.3 kJ per mole of reaction. The negative value shows it is spontaneous.

Worked example 3: equilibrium constant. From the same data, log K = nE° / 0.059 = 2 x 1.10 / 0.059 = 37.3. So K is about 10^37, a huge number, meaning that the reaction goes essentially to completion. A cell at equilibrium has E = 0 and Q = K.

Worked example 4: molar conductivity and degree of dissociation. A 0.10 M solution of a weak acid has a conductivity of 1.2 x 10^-2 S/cm. Find its molar conductivity, and the degree of dissociation if the limiting molar conductivity is 400 S cm^2/mol (an illustrative value). Working: Lambda m = 1000 x 1.2 x 10^-2 / 0.10 = 120 S cm^2/mol. alpha = 120 / 400 = 0.30, that is 30 per cent dissociated.

Worked example 5: electrolysis. How long will a current of 4.0 A take to liberate 2.24 L of chlorine at STP from molten NaCl? Working: moles of Cl2 = 2.24 / 22.4 = 0.100. Each Cl2 needs 2 electrons, so electrons = 0.20 mol and Q = 0.20 x 96,500 = 19,300 C. Time = 19,300 / 4.0 = 4825 s, about 80 minutes.

Common slips under time pressure

  • Using E° where the question gives non-standard concentrations.
  • Putting products over reactants the wrong way in Q for the Nernst equation: it is products over reactants of the cell reaction as written.
  • Using joules where kilojoules are asked for, or the other way round.
  • Using the conductivity in S/m with the formula designed for S/cm. Check the unit of kappa first.

Key takeaways: pick the formula from the key word; write n down for every calculation; do a quick sanity check, such as a positive E° for a spontaneous reaction.

Check your understanding

  1. 1. A question gives non-standard concentrations and asks for the cell EMF. Which relation is needed?

    1. delta G = -nFE
    2. The Nernst equation
    3. Kohlrausch's law
    4. E°cell = E°cathode - E°anode alone
    Show answer

    Answer: B. Non-standard concentrations require the Nernst equation, with the reaction quotient Q.

  2. 2. What is delta G° for a two-electron cell reaction with E° = 1.10 V?

    1. -106.2 kJ
    2. -212.3 kJ
    3. -424.6 kJ
    4. +212.3 kJ
    Show answer

    Answer: B. delta G° = -2 x 96,500 x 1.10 = -212,300 J = -212.3 kJ.

  3. 3. What is log K for a two-electron reaction with E° = 1.10 V at 298 K?

    1. 37.3
    2. 18.6
    3. 74.6
    4. 1.10
    Show answer

    Answer: A. log K = nE° / 0.059 = 2 x 1.10 / 0.059 = 37.3.

  4. 4. What is the molar conductivity of a 0.10 M solution with a conductivity of 1.2 x 10^-2 S/cm?

    1. 12 S cm^2/mol
    2. 1200 S cm^2/mol
    3. 0.12 S cm^2/mol
    4. 120 S cm^2/mol
    Show answer

    Answer: D. Lambda m = 1000 kappa / M = 1000 x 0.012 / 0.10 = 120 S cm^2/mol.

  5. 5. What is the EMF at equilibrium of any galvanic cell reaction?

    1. E°
    2. 1 V
    3. Zero
    4. Infinity
    Show answer

    Answer: C. At equilibrium Q = K and E = 0, so the cell no longer gives current.

Privacy · Terms · Refunds · Delivery