- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Polymers
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions on your own first, writing your working for the calculations, and only then read the answers. The questions cover all five lessons and are a little harder than the lesson checks. Use C = 12, H = 1, O = 16, F = 19, Cl = 35.5 g/mol where needed.
Final self-assessment
-
1. A PVC sample has average molar mass 62 500 g/mol. Its degree of polymerisation is
- 500
- 2000
- 1000
- 625
Show answer
Answer: C. Repeat unit C2H3Cl = 24 + 3 + 35.5 = 62.5 g/mol. DP = 62 500 ÷ 62.5 = 1000.
-
2. Which of these is a semi-synthetic polymer?
- Cellulose nitrate
- Starch
- Polythene
- Natural rubber
Show answer
Answer: A. Cellulose nitrate is made by chemically treating cellulose, a natural polymer. Starch and natural rubber are natural; polythene is synthetic.
-
3. Which of these is a natural polymer?
- Nylon-6,6
- PVC
- Bakelite
- Protein
Show answer
Answer: D. Proteins are natural polymers of amino acids. The other three are synthetic.
-
4. Which pair contains only thermosetting polymers?
- Polythene and PVC
- Bakelite and melamine-formaldehyde polymer
- Nylon-6,6 and terylene
- Buna-S and neoprene
Show answer
Answer: B. Bakelite and melamine-formaldehyde polymer both set into cross-linked networks. Polythene and PVC are thermoplastics, nylon and terylene are fibres, Buna-S and neoprene are elastomers.
-
5. Neoprene belongs to which class?
- Fibres
- Thermosetting polymers
- Elastomers
- Biodegradable polyesters
Show answer
Answer: C. Neoprene, polychloroprene, is a synthetic rubber, so it is an elastomer.
-
6. Which order of intermolecular forces between chains is correct?
- Fibres < thermoplastics < elastomers
- Thermoplastics < elastomers < fibres
- Elastomers < fibres < thermoplastics
- Elastomers < thermoplastics < fibres
Show answer
Answer: D. Elastomers have the weakest forces, thermoplastics intermediate, and fibres the strongest (such as hydrogen bonds).
-
7. Which of these is NOT an addition polymer?
- Polystyrene
- Nylon-6,6
- Teflon
- PVC
Show answer
Answer: B. Nylon-6,6 forms by condensation between a diamine and a diacid, releasing water. The others form by opening C=C bonds.
-
8. The percentage of fluorine by mass in Teflon is
- 38%
- 19%
- 76%
- 50%
Show answer
Answer: C. Repeat unit C2F4 = 24 + 76 = 100 g/mol, of which fluorine is 76 g. Fluorine = 76%.
-
9. Low density polythene is obtained by
- polymerising ethene at high pressure with a trace of oxygen or peroxide
- polymerising ethene with a Ziegler–Natta catalyst
- condensing ethylene glycol
- heating rubber with sulphur
Show answer
Answer: A. The high-pressure free radical route gives branched chains, which is LDPE. The Ziegler–Natta route gives linear HDPE.
-
10. Glyptal is made from
- phenol and formaldehyde
- ethylene glycol and phthalic acid
- melamine and formaldehyde
- ethylene glycol and terephthalic acid
Show answer
Answer: B. Glyptal is the polyester of ethylene glycol and phthalic acid. Ethylene glycol with terephthalic acid gives terylene.
-
11. The molar mass of the repeat unit of terylene is
- 228 g/mol
- 210 g/mol
- 174 g/mol
- 192 g/mol
Show answer
Answer: D. Terephthalic acid 166 + ethylene glycol 62 − 2 water (36) = 192 g/mol, matching C10H8O4.
-
12. Bakelite is formed by condensation of
- phenol and formaldehyde
- urea and formaldehyde
- melamine and formaldehyde
- phenol and acetone
Show answer
Answer: A. Phenol and formaldehyde first give the linear novolac, which cross-links on further heating to give bakelite.
-
13. A sample contains 10 molecules of 10 000 g/mol and 10 molecules of 20 000 g/mol. Its weight-average molar mass is about
- 15 000 g/mol
- 16 667 g/mol
- 18 000 g/mol
- 20 000 g/mol
Show answer
Answer: B. Mw = (10 × 10 000^2 + 10 × 20 000^2) ÷ (10 × 10 000 + 10 × 20 000) = 5 × 10^9 ÷ 3 × 10^5 ≈ 16 667 g/mol.
-
14. Nylon-2–nylon-6 is formed from
- glycine and aminocaproic acid
- 3-hydroxybutanoic acid and 3-hydroxypentanoic acid
- adipic acid and hexamethylenediamine
- caprolactam alone
Show answer
Answer: A. Nylon-2–nylon-6 is a biodegradable polyamide of glycine and aminocaproic acid. 3-hydroxybutanoic and 3-hydroxypentanoic acids give PHBV, adipic acid and hexamethylenediamine give nylon-6,6, and caprolactam alone gives nylon-6.
-
15. A polymer sample is 50% by mass chains of 10 000 g/mol and 50% by mass chains of 30 000 g/mol. Its polydispersity index is about
- 1.00
- 1.50
- 1.33
- 2.00
Show answer
Answer: C. Mw = 0.5 × 10 000 + 0.5 × 30 000 = 20 000 g/mol. Mn = 1 ÷ (0.5/10 000 + 0.5/30 000) = 15 000 g/mol. PDI = 20 000 ÷ 15 000 = 1.33.
Revisit the matching lesson for any question you missed. Questions 1-3: lesson 1 (monomers, polymers and their sources). Questions 4-6: lesson 2 (classification by structure and forces). Questions 7-9: lesson 3 (addition polymerisation). Questions 10-12: lesson 4 (condensation polymers and copolymers). Questions 13-15: lesson 5 (rubber, molar mass averages and biodegradable polymers).
Sign in to keep track of the lessons you finish.