- Foundation
- 15 practice questions
Final self-assessment: Paper Folding
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions without looking back at the lessons, then check your answers and read each explanation. The questions are a little harder than the checks after each lesson.
Final self-assessment
-
1. A sheet is folded in half three times. Two holes are punched through the whole stack, neither on a fold line. How many holes appear on opening?
- 8
- 10
- 12
- 16
Show answer
Answer: D. Three folds give 8 layers. Each punch makes one hole per layer, so 8 holes per punch, and two punches make 16.
-
2. A sheet is folded in half once. One hole is punched on the fold line and another away from it, each through both layers. How many holes appear on opening?
- 2
- 3
- 4
- 1
Show answer
Answer: B. The hole on the fold line joins into a single hole on the crease. The other hole goes through two layers and gives 2 holes. Total 1 + 2 = 3.
-
3. Which statement about folding and punching is true?
- A hole on a fold line appears as two holes
- Each fold in half doubles the number of layers
- A punch goes through the top layer only
- Folding in half twice gives three layers
Show answer
Answer: B. Each fold in half doubles the layers (1, 2, 4, 8). A punch goes through every layer, a hole on a fold line is a single hole, and two folds give 4 layers, not 3.
-
4. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along y = 4, top over bottom, so the paper lies in the bottom half. A hole is punched at (7, 2). Where is the other hole?
- (7, 6)
- (1, 2)
- (1, 6)
- (2, 7)
Show answer
Answer: A. A horizontal fold keeps x and changes y to 8 - y. The twin of (7, 2) is (7, 6), directly above in the same column.
-
5. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. After one fold and one punch, the opened sheet has holes at (1, 3) and (7, 3) only. Along which line was it folded?
- y = 4
- x = 3
- x = 4
- The diagonal from (0, 0) to (8, 8)
Show answer
Answer: C. The two holes are at the same height, and 1 and 7 are each 3 units from x = 4 (1 + 7 = 8). That is the vertical fold along x = 4. A fold along y = 4 would keep x the same, and the diagonal would turn (1, 3) into (3, 1).
-
6. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along y = 4, bottom over top, so the paper lies in the top half. Holes are punched at (2, 5) and at (6, 4). Which set shows all the holes on opening?
- (2, 5), (6, 5), (6, 4) and (2, 4)
- (2, 5), (2, 3), (6, 4) and (6, 0)
- (2, 5) and (6, 4) only
- (2, 5), (2, 3) and (6, 4)
Show answer
Answer: D. (2, 5) is off the crease, so its twin is (2, 8 - 5) = (2, 3). (6, 4) lies on the crease y = 4, so it is a single hole. That gives three holes.
-
7. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 and then along y = 4, so the paper lies in the square from (4, 4) to (8, 8). A hole is punched at (6, 5). The holes on opening form a rectangle. What are its width and height?
- Width 4, height 2
- Width 2, height 4
- Width 4, height 4
- Width 2, height 2
Show answer
Answer: A. Mirror across y = 4: (6, 5) and (6, 3). Mirror across x = 4: (2, 5) and (2, 3). The x-values are 2 and 6 (width 4) and the y-values are 3 and 5 (height 2).
-
8. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 and then along y = 4, so the paper lies in the square from (4, 4) to (8, 8). Holes are punched at (5, 4) and at (7, 7). How many holes appear on opening?
- 4
- 5
- 6
- 8
Show answer
Answer: C. (7, 7) is on no crease, so it gives 4 holes: (7, 7), (7, 1), (1, 7), (1, 1). (5, 4) lies on the crease y = 4, so it does not double there, but it doubles across x = 4: (5, 4) and (3, 4). Total 4 + 2 = 6.
-
9. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along y = 4 (top over bottom, paper in the bottom half) and then along x = 4 (right over left, paper in the square from (0, 0) to (4, 4)). A hole is punched at (1, 3). Which point is NOT one of the holes on opening?
- (7, 5)
- (1, 5)
- (3, 1)
- (7, 3)
Show answer
Answer: C. Undo the last fold (x = 4) first: (1, 3) and (7, 3). Then undo y = 4: (1, 5) and (7, 5). The point (3, 1) is not produced; it would need a diagonal fold.
-
10. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along the diagonal from (0, 0) to (8, 8). Holes are punched at (2, 7) and at (4, 4). Which set shows all the holes on opening?
- (2, 7) and (4, 4) only
- (2, 7), (7, 2) and (4, 4)
- (2, 7), (6, 1) and (4, 4)
- (2, 7), (7, 2), (4, 4) and (6, 6)
Show answer
Answer: B. Across the line x = y the twin of (x, y) is (y, x). (2, 7) gives (7, 2). (4, 4) lies on the crease, so it is a single hole. Three holes in all.
-
11. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along the diagonal from (0, 8) to (8, 0) and a hole is punched at (3, 2). Where is the second hole?
- (2, 3)
- (5, 6)
- (6, 5)
- (5, 5)
Show answer
Answer: C. For this diagonal the twin of (x, y) is (8 - y, 8 - x) = (8 - 2, 8 - 3) = (6, 5). Check: 3 + 2 = 5 is 3 below 8, and 6 + 5 = 11 is 3 above 8.
-
12. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along the diagonal from (0, 8) to (8, 0). A hole punched at which point gives only ONE hole on opening?
- (3, 3)
- (5, 5)
- (2, 4)
- (3, 5)
Show answer
Answer: D. This crease is the line x + y = 8. Only (3, 5) has 3 + 5 = 8, so it lies on the crease and is its own twin. The others are off the crease and each give two holes.
-
13. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 (right over left, paper in x from 0 to 4) and then along y = 4 (top over bottom, paper in y from 0 to 4). A hole is punched at (3, 1). How many holes are in the upper-right quarter of the opened sheet?
- 0
- 1
- 2
- 4
Show answer
Answer: B. Undo y = 4: (3, 1) and (3, 7). Undo x = 4: (5, 1) and (5, 7). One hole in each quarter; the upper-right quarter (x and y both above 4) holds only (5, 7).
-
14. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded once along x = 4. Holes are punched at (6, 6), (4, 2) and (5, 3). How many holes appear on opening?
- 6
- 4
- 3
- 5
Show answer
Answer: D. (6, 6) and (5, 3) are off the crease, so each gives 2 holes. (4, 2) lies on the crease x = 4, so it gives 1. Total 2 + 1 + 2 = 5.
-
15. A square sheet is folded in half along its vertical centre line and then in half along its horizontal centre line. A hole is punched exactly where the two creases meet. How many holes appear on opening?
- 1
- 2
- 4
- 0
Show answer
Answer: A. The point lies on both creases, so it is its own twin across each of them. The punch cuts one hole at the centre of the sheet.
Questions 1-3: lesson 1, "Folds, layers and holes". Questions 4-6: lesson 2, "Unfolding one fold: where the holes land". Questions 7-9: lesson 3, "Two folds: four holes". Questions 10-12: lesson 4, "Diagonal folds". Questions 13-15: lesson 5, "Paper folding: mixed problems and method". Revisit a lesson for the questions you missed.
Sign in to keep track of the lessons you finish.