- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Electrochemistry basics
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions on paper first, showing your working, and only then read the explanations. They mix the whole course and are a little harder than the lesson checks. Use F = 96 500 C/mol and these standard reduction potentials where needed: Zn2+/Zn −0.76 V, Fe2+/Fe −0.44 V, Ni2+/Ni −0.25 V, Cu2+/Cu +0.34 V, Ag+/Ag +0.80 V.
Final self-assessment
-
1. Which reaction takes place in the cell Ni(s) | Ni2+(aq) || Ag+(aq) | Ag(s)?
- Ni2+ + 2Ag → Ni + 2Ag+
- Ni + Ag+ → Ni2+ + Ag
- Ni + 2Ag+ → Ni2+ + 2Ag
- 2Ni + Ag+ → 2Ni2+ + Ag
Show answer
Answer: C. The left electrode is the anode: Ni → Ni2+ + 2e−. The right is the cathode: Ag+ + e− → Ag, doubled to take 2 electrons. Overall Ni + 2Ag+ → Ni2+ + 2Ag.
-
2. As a Daniell cell supplies current, the concentration of Cu2+ in the copper half-cell
- decreases
- increases
- stays the same
- first rises then falls
Show answer
Answer: A. At the cathode Cu2+ + 2e− → Cu removes copper ions from solution, so [Cu2+] falls while copper metal is deposited.
-
3. In the reaction Zn + Cu2+ → Zn2+ + Cu, the oxidising agent is
- Zn
- Cu
- Zn2+
- Cu2+
Show answer
Answer: D. Cu2+ gains electrons (is reduced), so it is the oxidising agent. Zinc is the reducing agent.
-
4. The standard EMF of the cell Fe(s) | Fe2+(aq) || Ag+(aq) | Ag(s) is
- 0.36 V
- 1.24 V
- −1.24 V
- 1.60 V
Show answer
Answer: B. E°cell = E°cathode − E°anode = 0.80 − (−0.44) = 1.24 V. E° is not doubled for the 2Ag+ in the balanced equation.
-
5. Which metal releases hydrogen from dilute hydrochloric acid under standard conditions?
- Cu
- Ag
- Zn
- Au
Show answer
Answer: C. A metal releases H2 from acid only if its reduction potential is below 0.00 V. Zinc (−0.76 V) does; copper, silver and gold have positive E° values and do not.
-
6. Which order of reducing strength is correct?
- Li > Zn > Cu > Ag
- Ag > Cu > Zn > Li
- Zn > Li > Ag > Cu
- Cu > Ag > Li > Zn
Show answer
Answer: A. The more negative the reduction potential, the stronger the reducing agent: Li (−3.05) > Zn (−0.76) > Cu (+0.34) > Ag (+0.80).
-
7. For Zn + 2Ag+ → Zn2+ + 2Ag, E° = 1.56 V. ΔG° is about
- −150.5 kJ/mol
- −602 kJ/mol
- +301 kJ/mol
- −301 kJ/mol
Show answer
Answer: D. n = 2. ΔG° = −2 × 96 500 × 1.56 = −301 080 J/mol ≈ −301 kJ/mol.
-
8. A Daniell cell (E° = 1.10 V) has [Zn2+] = 0.1 M and [Cu2+] = 0.001 M. Its EMF at 298 K is about
- 1.16 V
- 1.04 V
- 1.10 V
- 1.07 V
Show answer
Answer: B. Q = 0.1 ÷ 0.001 = 100, log Q = 2. E = 1.10 − (0.059/2) × 2 = 1.10 − 0.059 = 1.041 V, about 1.04 V.
-
9. Increasing the concentration of Cu2+ in a Daniell cell, with everything else the same, makes the EMF
- decrease
- become zero
- increase
- stay the same
Show answer
Answer: C. Q = [Zn2+]/[Cu2+] becomes smaller, so −(0.059/2) log Q becomes larger and E increases.
-
10. A cell with cell constant 0.5 cm^−1 shows a resistance of 250 Ω with a 0.01 M solution. The molar conductivity is
- 200 S cm^2 mol^−1
- 20 S cm^2 mol^−1
- 2 S cm^2 mol^−1
- 500 S cm^2 mol^−1
Show answer
Answer: A. κ = 0.5 ÷ 250 = 0.002 S cm^−1. Λm = 0.002 × 1000 ÷ 0.01 = 200 S cm^2 mol^−1.
-
11. Λ°m values (S cm^2 mol^−1): HCl 426, CH3COONa 91, NaCl 126. Λ°m for CH3COOH is
- 643
- 391
- 461
- 209
Show answer
Answer: B. Λ°m(CH3COOH) = Λ°m(HCl) + Λ°m(CH3COONa) − Λ°m(NaCl) = 426 + 91 − 126 = 391 S cm^2 mol^−1.
-
12. For which electrolyte can Λ°m NOT be found by extending a graph of Λm against √c to zero concentration?
- KCl
- NaCl
- HCl
- CH3COOH
Show answer
Answer: D. Acetic acid is a weak electrolyte. Its Λm rises steeply at very low concentration, so the graph cannot be extended reliably; Kohlrausch's law is used instead.
-
13. The same charge passes through AgNO3 and CuSO4 cells in series and deposits 1.08 g of silver (Ag 108, Cu 63.5). The mass of copper deposited is about
- 0.64 g
- 0.32 g
- 1.27 g
- 0.16 g
Show answer
Answer: B. Moles of electrons = 1.08 ÷ 108 = 0.01. Cu needs 2 electrons per atom: 0.005 mol × 63.5 = 0.3175 g, about 0.32 g.
-
14. How long must a current of 3 A flow to deposit 0.27 g of aluminium (27 g/mol) from Al3+?
- 322 s
- 965 s
- 2895 s
- 1930 s
Show answer
Answer: B. Moles Al = 0.01; electrons needed = 3 × 0.01 = 0.03 mol; Q = 0.03 × 96 500 = 2895 C; t = 2895 ÷ 3 = 965 s.
-
15. Dilute sulphuric acid is electrolysed between platinum electrodes. The volume ratio of hydrogen to oxygen collected is
- 1 : 1
- 1 : 2
- 2 : 1
- 4 : 1
Show answer
Answer: C. The net change is 2H2O → 2H2 + O2: 4 electrons give 2 mol H2 at the cathode and 1 mol O2 at the anode, so 2 : 1 by volume.
Revisit the lesson that matches any question you missed. Questions 1-3: lesson 1 (redox and the galvanic cell). Questions 4-6: lesson 2 (electrode potentials and the electrochemical series). Questions 7-9: lesson 3 (Nernst equation and Gibbs energy). Questions 10-12: lesson 4 (conductance of electrolyte solutions). Questions 13-15: lesson 5 (electrolysis and Faraday's laws).
Sign in to keep track of the lessons you finish.