• Practice
  • About 14 min
  • 5 practice questions

Baseline surveys and indicators: what to measure and how to read the data

Choose suitable indicators for air, water, noise, biodiversity and people, and read a baseline data set without being misled by averages.

If something looks wrong, please tell us.

The baseline describes the condition of the environment before the project. Every prediction and every later monitoring result is compared with it, so a weak baseline weakens the whole assessment. Questions on this topic ask what to measure, why one season is not enough, and how to read a small table of readings.

Indicators by component

ComponentCommon indicatorsWhat a worrying value looks like
AirParticulate matter (PM10, PM2.5), sulphur dioxide, oxides of nitrogen, carbon monoxideValues above the legal limits
WaterpH, dissolved oxygen (DO), biochemical oxygen demand (BOD), turbidity, dissolved solids, coliform bacteriaLow DO, high BOD, high coliform count
NoiseEquivalent sound level in dB(A), day and nightLevels above limits for the zone
Land and soilLand use, erosion, soil fertility, contaminationBare, eroding or polluted soil
BiodiversitySpecies richness, presence of threatened species, habitat areaRare species or fragile habitat on the site
PeoplePopulation, livelihoods, income, health, literacy, land ownershipDependence on a resource the project will remove

BOD is the amount of oxygen that microorganisms use to break down organic matter in water; a high BOD means a heavy organic load. DO is the oxygen dissolved in the water that fish and other life need. Where BOD is high, DO usually falls, because microbes use up the oxygen. These two work as a pair in many questions.

Why one visit is not enough

  • Rivers, air and wildlife change with season: a river in flood dilutes pollution that returns in the dry season.
  • Birds and fish may migrate in or out; a survey in the wrong month can miss a threatened species.
  • A baseline should cover the main seasons, include secondary data (records, maps, earlier studies) and primary data (own sampling), and record the date and place of every sample.

Averages can hide problems

A mean may meet a standard while many readings break it. Always look at the individual values, the maximum and the number of exceedances.

Worked example 1: reading six samples

Six river samples of BOD (mg/L) are 2.0, 2.4, 3.6, 4.2, 2.8 and 3.0, and the standard for this use is 3.0 mg/L (an illustrative limit). Mean = (2.0 + 2.4 + 3.6 + 4.2 + 2.8 + 3.0) ÷ 6 = 18.0 ÷ 6 = 3.0 mg/L. The mean equals the limit, yet two samples (3.6 and 4.2) are above it: 2 out of 6, or 33 per cent. Reporting only the mean would hide this. The baseline should say that the river is at times worse than the standard.

Worked example 2: choosing indicators for a quarry near a village

A stone quarry is proposed near a village that depends on a stream. Ask what the quarry will change. Blasting and trucks raise dust and noise, so measure PM10 and dB(A) at the village. The pit may change groundwater and stream flow, so measure well water levels, stream flow, turbidity and pH. Clearing land affects vegetation and wildlife, so survey plants, birds and any threatened species. People depend on the stream for water and livelihoods, so record households, water use and health. Indicators are chosen by the impacts expected, not by habit.

Percent change is always calculated from the baseline. If baseline PM10 at the village is 40 and the predicted level is 46, the rise is (46 − 40) ÷ 40 × 100 = 15 per cent.

Baseline = the condition before the project, measured across seasons with indicators matched to the expected impacts. Check individual readings, not only the mean.

Key takeaways

  • Pick indicators for each component from the impacts you expect.
  • BOD and DO tell the story of organic pollution in water.
  • Cover seasons, and look beyond averages to exceedances.

Check your understanding

  1. 1. BOD is a measure of:

    1. Oxygen dissolved in water at saturation level
    2. Oxygen used by microbes in breaking down organic matter
    3. Total salt content dissolved in a litre of water
    4. Acidity or alkalinity of water on a pH scale
    Show answer

    Answer: B. Biochemical oxygen demand measures the oxygen needed by microorganisms to decompose organic matter, so it shows organic pollution.

  2. 2. Four readings of a pollutant (mg/L) are 1.8, 3.5, 2.9 and 4.1, with a limit of 3.0. What percentage of samples exceed the limit?

    1. 25 per cent
    2. 75 per cent
    3. 100 per cent
    4. 50 per cent
    Show answer

    Answer: D. 3.5 and 4.1 are above 3.0, which is 2 of 4 samples = 50 per cent. The mean is 3.075, which hides the pattern.

  3. 3. Low dissolved oxygen in a river just below a drain, together with high BOD, suggests:

    1. A heavy organic load being decomposed by microbes
    2. A rise in the oxygen output of aquatic plants
    3. The water is acting as a clean mountain stream
    4. A very low level of suspended particles in the river
    Show answer

    Answer: A. Microbes decompose organic matter using oxygen, so a high BOD goes with low DO downstream of an organic discharge.

  4. 4. Why should a baseline survey cover more than one season?

    1. Laws forbid measurements in one season only
    2. Seasons do not affect any environmental data
    3. Flows and wildlife change with the season
    4. Only secondary data are used in the baseline
    Show answer

    Answer: C. Dilution, migration and weather change over the year, so a single visit can give a misleading picture.

  5. 5. Baseline sulphur dioxide at a site is 25 units and the predicted value with the project is 30 units. The percentage change from the baseline is:

    1. 5 per cent
    2. 25 per cent
    3. 120 per cent
    4. 20 per cent
    Show answer

    Answer: D. (30 − 25) ÷ 25 × 100 = 20 per cent. The change is always divided by the baseline.

Privacy · Terms · Refunds · Delivery