• Practice
  • About 15 min
  • 5 practice questions

Cumulative impacts and strategic environmental assessment

Work out how much of an area's assimilative capacity is left, see why project-by-project EIA misses cumulative effects, and explain what strategic environmental assessment adds.

If something looks wrong, please tell us.

An EIA that studies one project at a time can approve every project and still allow an area to be ruined. Each new factory adds a little to the river; each new road takes a little forest; each looks small against the baseline. Cumulative impact assessment and strategic environmental assessment (SEA) exist to close this gap. Questions test the idea with simple capacity arithmetic and with statements about what SEA is and is not. All numbers are illustrative.

Cumulative impacts

A cumulative impact is the combined effect of a project together with other past, present and reasonably foreseeable future activities in the same area. Effects can add up (several discharges into one river), interact (two pollutants together being worse than either alone) or cross a threshold (a forest broken into pieces too small to support a species). The trap in single-project EIA is that each project is compared only with the current baseline, which already includes earlier projects, so the slow overall decline is never judged as a whole.

Assimilative capacity as a budget

Assimilative capacity is the amount of a pollutant an environment can receive without crossing a chosen standard. Treating it as a budget helps: capacity minus what is already used gives what is left, and each new project draws on what is left. When a project-by-project system approves the first applicants freely, later applicants may find nothing left, and the budget may be spent on low-value uses. Planning the budget in advance is one of the jobs of SEA.

Worked example 1: how many can fit?

A river stretch can receive 100 units of a pollutant a day without breaching its standard. Existing discharges use 64 units. Each proposed plant would add 10 units. Remaining capacity = 100 − 64 = 36 units. Number of plants that fit = 36 ÷ 10 = 3.6, so only 3 plants can be approved, leaving 6 units. If a fourth applies, approving it would give 64 + 40 = 104, above the limit. If each plant installed treatment cutting its discharge to 6 units, 36 ÷ 6 = 6 plants would fit exactly.

Strategic environmental assessment

SEA applies the logic of environmental assessment to policies, plans and programmes, such as a state energy plan, a river-basin development programme or a regional industrial policy, before individual projects are proposed. Because it happens earlier and at a higher level, it can consider alternatives that single-project EIA cannot, such as whether to meet power demand through efficiency, solar or coal at all, and it can assess cumulative effects of the whole plan. SEA does not replace project EIA; it sets the frame within which project EIAs are then carried out.

Worked example 2: project EIA or SEA?

Three cases. (1) A study of one cement plant's dust and water use. (2) A study of a ten-year plan to build several hydropower dams in one river basin, comparing it with an option based on efficiency and other sources. (3) A study of a single highway's route through a forest. Cases 1 and 3 are project EIAs. Case 2 is SEA: it assesses a programme of many projects together, considers basin-wide cumulative effects such as fish migration and silt, and compares strategic alternatives.

Cumulative impact = this project + other past, present and foreseeable activities. Remaining capacity = assimilative capacity − existing load. SEA = assessment of policies, plans and programmes, earlier and wider than project EIA.

Key takeaways: single-project EIA can miss slow cumulative decline; cumulative effects can add, interact or cross thresholds; assimilative capacity works like a budget; SEA assesses policies, plans and programmes, considers strategic alternatives and cumulative effects, and frames later project EIAs without replacing them.

Check your understanding

  1. 1. A lake can assimilate 80 units a day. Existing load is 52 units. Each new unit proposed adds 9 units. How many can be approved without breaching capacity?

    1. 4
    2. 2
    3. 5
    4. 3
    Show answer

    Answer: D. Remaining = 80 − 52 = 28. 28 ÷ 9 ≈ 3.1, so 3 can be approved (27 units); a fourth would take the load to 88.

  2. 2. Which best describes a cumulative impact?

    1. The combined effect of a project with other past, present and foreseeable activities in the area
    2. The impact of a project during its construction phase only
    3. The total cost of a project
    4. An impact that is always positive
    Show answer

    Answer: A. Cumulative impacts come from many activities together, not from one project alone.

  3. 3. Strategic environmental assessment is applied to:

    1. Policies, plans and programmes
    2. Only small individual factories
    3. Only completed projects
    4. Only private houses
    Show answer

    Answer: A. SEA works above the project level, at the level of policies, plans and programmes.

  4. 4. Which statement about SEA is correct?

    1. It replaces the need for any project EIA
    2. It can consider strategic alternatives, such as different ways of meeting energy demand
    3. It is carried out after projects are completed
    4. It ignores cumulative effects
    Show answer

    Answer: B. SEA comes earlier and can compare broad alternatives and cumulative effects; it frames, but does not replace, project EIA.

  5. 5. Why can project-by-project EIA miss cumulative decline?

    1. Each project is compared with pristine conditions
    2. Project EIAs never use a baseline
    3. Cumulative effects only occur in cities
    4. Each project is compared with a baseline that already includes earlier projects
    Show answer

    Answer: D. Because the baseline keeps shifting as projects are added, no single EIA judges the overall decline.

Privacy · Terms · Refunds · Delivery