• Practice
  • About 15 min
  • 5 practice questions

Noise problems: adding decibels and applying distance rules

Combine sound levels correctly on the decibel scale, predict levels at a distance from point and line sources, and include the effect of a barrier.

If something looks wrong, please tell us.

Noise questions mix arithmetic with a common trap: decibels are logarithmic, so they cannot be added like ordinary numbers. This lesson gives the rules in the form examiners use, with worked problems, so that you can finish a noise question in under two minutes.

The scale

Sound level in decibels is L = 10 log10(I ÷ I0), where I is intensity. A rise of 10 dB means ten times the intensity and sounds roughly twice as loud. A rise of 3 dB is a doubling of intensity but is only just noticeable. dB(A) is a version weighted to match the sensitivity of the human ear.

Rule 1: adding sources

Convert each level to intensity, add, convert back: L = 10 log10(10^(L1/10) + 10^(L2/10) + …). Useful shortcuts are:

  • Two equal sources: add 3 dB to one of them (70 + 70 gives 73 dB).
  • Four equal sources: add 6 dB (80 each gives 86 dB).
  • Ten equal sources: add 10 dB.
  • Two very different sources: the louder one dominates; if they differ by 10 dB or more, add almost nothing (70 and 60 give 70.4 dB).

Rule 2: distance

  • Point source (one machine, an isolated pump) in open air: level falls by 20 log10(r2 ÷ r1). Each doubling of distance drops it by about 6 dB.
  • Line source (a busy road, a long train): level falls by 10 log10(r2 ÷ r1), about 3 dB for each doubling of distance.
  • Barriers, buildings and dense belts of trees can reduce noise further. A good solid barrier may give about 5 to 15 dB of reduction, depending on its size and position; trees alone give little.

Worked example 1: adding sources

Four identical machines each give 80 dB at a point. Four equal sources add 10 log10(4) = 6.02 dB, so the total is about 86 dB. If instead one machine of 80 dB works beside another of 70 dB, the total is 10 log10(10^8 + 10^7) = 80.4 dB. The quiet machine adds only 0.4 dB, so silencing the 70 dB one would hardly help; it is the louder machine that must be treated.

Worked example 2: distance and a barrier

A generator produces 85 dB at 5 m (take it as a point source). A house stands 40 m away. The distance ratio is 40 ÷ 5 = 8, so the drop is 20 log10(8) = 18.06 dB and the level at the house is 85 − 18.06 = 66.9 dB, about 67 dB. If the night-time limit is 55 dB(A) (an illustrative limit), the excess is 12 dB. A solid barrier giving 10 dB reduction would bring the level to 56.9 dB, still about 2 dB over the limit, so a longer barrier, an enclosure around the generator or a quieter machine would be needed too.

Common traps

  • Adding 70 dB and 70 dB to get 140 dB: the correct answer is 73 dB.
  • Using the point-source rule for a road, or the line-source rule for a single machine.
  • Forgetting that reductions at the receiver are subtracted from the total, not from each source separately.

Equal sources: +3 dB for two, +6 dB for four, +10 dB for ten. Point source: -6 dB per doubling of distance. Line source: -3 dB per doubling. Never add decibels arithmetically.

Key takeaways

  • Decibels are logarithmic: convert to intensity, add, convert back, or use the shortcuts.
  • Distance rules depend on whether the source is a point or a line.
  • Finish by comparing the predicted level with the limit and deciding on mitigation.

Check your understanding

  1. 1. Two identical machines each produce 70 dB at a point. What is the combined level?

    1. About 140 dB
    2. About 80 dB
    3. About 73 dB
    4. About 71 dB
    Show answer

    Answer: C. Doubling the intensity adds 3 dB, so 70 + 3 = 73 dB. Decibels are not added arithmetically.

  2. 2. A point source gives 76 dB at 10 m. What is the level at 20 m in open air?

    1. About 70 dB
    2. About 73 dB
    3. About 66 dB
    4. About 38 dB
    Show answer

    Answer: A. Doubling the distance reduces a point source by 20 log10(2) = 6 dB. 76 − 6 = 70 dB.

  3. 3. A busy road behaves as a line source. If the level is 75 dB at 10 m, the level at 40 m is about:

    1. 63 dB
    2. 69 dB
    3. 72 dB
    4. 57 dB
    Show answer

    Answer: B. The drop is 10 log10(4) = 6.02 dB for a quadrupling of distance. 75 − 6 = 69 dB.

  4. 4. A source of 80 dB works together with one of 60 dB. The combined level is about:

    1. 140 dB
    2. 70 dB
    3. 83 dB
    4. 80 dB
    Show answer

    Answer: D. The levels differ by 20 dB, so the louder source dominates. The total is 10 log10(10^8 + 10^6) = 80.04 dB, about 80 dB.

  5. 5. Ten identical machines each give 65 dB. The combined level is:

    1. 75 dB
    2. 650 dB
    3. 68 dB
    4. 85 dB
    Show answer

    Answer: A. Ten equal sources add 10 log10(10) = 10 dB. So 65 + 10 = 75 dB.

Privacy · Terms · Refunds · Delivery